Question about 1990 Mazda Protege

1 Answer

Left turn signal on 1991 Mazda Protege will not work. I changed the bulb and that did not solve the problem. The flashers work and the right turn signal is OK. Just the left turn will not work. Any ideas ?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mazda Master
  • 1,201 Answers

Could be the switch itself. Pretty easy to replace the whole turn signal switch. I've had the flashers go out also on mine, but mine ended up being the switch. I grabbed one from a recycling yard, cost me less than $20.

Posted on Jan 31, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2008 mazda 6 - when I turn on my right turn signal, the flashers come on. The left turn signal works normally with no problems. Fuses looked ok and bulbs are good. Help please....


The single most common cause is a faulty indicator bulb. Failure of any one bulb will effect the way the indicators on that side work

Nov 08, 2014 | 2008 Mazda MAZDA6

1 Answer

Right turn signals work but left signals don't work


Front right and rear right are on a different circuit than the left front an left rear. Locate the Flasher control module behind dash. With key in RUN position check for pulsing battery voltage on the Green/white wire coming out of the flasher control module electrical connector. If no battery voltage, check for battery voltage coming into the flasher from the turn signal switch on the white/red wire. Left turn input is on the white/black wire. If not battery voltage on white/red, but voltage on white/black when turning left, then the turn signal switch is bad

Dec 05, 2017 | 2002 Mazda Protege

1 Answer

Left signal light doesn't blink.Bulb is good. Does this mean a bad flasher? If yes, where is it?


No, if the flasher was bad, both left and right would not flash.

It means that one of the two left bulbs has burned out. When you have two good bulbs on the left side, the turn signal should blink.

Feb 21, 2010 | 1991 Buick Century

3 Answers

Turn signal comes on,but doesn't blink;all 4 hazards work.


Check near the fuse box and the left side under the dash. There are two flasers in a car, one for the hazards and one for the turn signals. You are on the right track for if the hazards are working the bulbs and wiring to the bulbs are eliminated. Once you replace the flasher your problem should be fixed. When checking for the flasher remember they sometimes are clipped or taped up, so feel around as well as looking.

Sep 23, 2009 | 1991 Buick Regal

1 Answer

Rear left and right turn signal lights not working.


the electronic flasher module may be faulty, or you could have blown a fuse

Aug 10, 2009 | 2008 Mazda Tribute

1 Answer

Rear passenger turn signal won't work


make sure you have the correct replacement bulb for that car. Some bulbs do more than one thing.

May 19, 2009 | 1990 Mazda Protege

2 Answers

1993 Dodge Shadow...left turn signal won't flash


If the fuses are good and the front and rear bulbs are good, change the flasher for the turn signals, even tho the right is working. If that doesn't fix the problem, it might be in the turn sgnal switch on the steering column.
If both bulbs are good for the backup lights and fuses are good, then the backup light switch, which is screwed into the side of the transmission has to bad.

Apr 12, 2009 | 1993 Dodge Shadow

1 Answer

Can't find the turn signal or emergency flasher fuse for 1998


Conrad, up north.
My protege is a '99. The turn signals and hazard flashers use the same flasher unit. It is located under the dash to the left of the steering wheel and above and a bit to the right right of the driver's side fuse box.

Dec 07, 2008 | 1998 Mazda Protege

Not finding what you are looking for?
1990 Mazda Protege Logo

446 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

79865 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...