Question about Dodge Durango
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: turn signal will not turn off
You May need to replace the turn signal Switch/lever assembly on your car , do the turn signals work at all ? if they don't try the 4 way flasher , if the 4 way flasher's work suspect the turn signal switch .
Hope this helps
Posted on Dec 19, 2008
On my 2000 Mazda B3000 it's up underneath the dash right by the steering column, like they said, blue plastic square relay
Posted on Apr 07, 2010
It's up under the left side of the dash, attached to the same bracket as the body control module. But sometimes the problem is in the hazard switch - try pressing it when the signals don't work and that often brings them back to life. Also, check the ground wire to the left of the base of the steering column.
Posted on Apr 07, 2010
Tips for a great answer:
Sep 21, 2014 | 1988 Buick Century
Turn on the Durango and check each of the four turn signals
to make sure that the bulbs are not burned out. If you find one that has gone
out, replace the bulb and retest the turn signals. When a bulb goes bad on this
circuit, the resulting operation can mimic a bad flasher or one that is
Locate the combination turn signal flasher and relay. It is
on the left end of the driver's dash. Open the access door and view the
collection of relays and fuses. At the left side of the mounting block is a
larger flasher and relay. This is the combination turn signal flasher and
the relay by placing you finger on the relay housing and activating the turn
signal. If you have found the right one, you should feel a clicking as the turn
signal blinks. Remove the relay, replace with the new relay and close the
Start the Durango and activate the turn signals to check that they each work. The light should turn on and should blink. Also, check the hazard lights to make sure they work.
Feb 11, 2012 | Dodge Ram 1500 Cars & Trucks
Dec 14, 2010 | 1996 Honda Accord
May 20, 2010 | Cars & Trucks
Aug 12, 2009 | 1989 Lincoln Town Car
Dec 19, 2008 | 1997 Mitsubishi Eclipse
Sep 28, 2008 | 1993 Buick Century
72 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: