Question about 1999 Jeep Wrangler

1 Answer

1999 Tj Sahara Edition 4.0, 4wd light doesn't turn on when you engage it. How do I know if 4wd is working or it's just a burnt bulb? How do you change a burnt bulb?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

This light is problematic as I had to encounter this as well. For what it is worth, the job of removing it to replace a bulb, most likely an LED will not be worth the time. You know you are in 4wd when your steering becomes a bit stiffer and when you make a sharper turn feel your axles kind of bind or get stiff. The steering feels tighter or "heavier" and maybe your power steering labors more in a sharp turn. Once you drive with it on and off and pay attention to these aspects, you will know you are locked in 4wd. You should also feel a slight clunk or release when you are driving and you take it out of 4wd.

Posted on Jan 11, 2011

Testimonial: "Thanks for the clarification, you can really feel the 4wd when engaged."

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Jeep tj problems


That is a sign of a bad bulb, flashing fast. Check that rear bulb.

Dec 31, 2013 | Cars & Trucks

Tip

1999 Honda Accord Clock Burnt Out Light Bulb/Lamp Replacement


The Honda OE part number of the Clock Light Bulb2_bing.gif/Lamp replacement is # 35505-S84-N01. The part cost me $3.25 from a local Honda Dealer. A good site with instructions on how to replace the burnt out bulb is http://automotive.trevorated.com/
This part number may work for most G6 / 6th Generation Honda Accords, though I do know it works for my 1999 Honda Accord 4-speed automatic.

on May 07, 2010 | Honda Accord Cars & Trucks

Tip

1999 Honda Accord Center Console Gear Shift Burnt Out Light Bulb/Lamp...


The part number of the Light Bulb/Lamp replacement is # 74. The part cost me $5 for a Sylvania 2 pack from a local Auto Parts store. A good site with instructions on how to replace the burnt out bulb is http://automotive.trevorated.com/
This part number may work for most G6 / 6th Generation Honda Accords, though I do know it works for my 1999 Honda Accord 4-speed automatic.

on May 07, 2010 | Honda Accord Cars & Trucks

1 Answer

2004 Honda Pilot, right rear brake light doesn`t work. I know it`s not the light bulb because it works for the turn signal and hazard lights.


Chances are that is the bulb. Its a dual filament bulb. The brake portion of it is burnt out. try swapping it with the left side and see if it works then. If it works, get a new bulb.

Apr 17, 2013 | 2004 Honda Pilot

1 Answer

Taillight won't burn but turn signal works. Wrong bulb?


Some vehicles use a double filament bulb, if one of the filaments is 'burnt' out then the turn signal would work but the running/brake light would not work.

Nov 28, 2011 | 1999 Plymouth Grand Voyager

2 Answers

Check engine light does not turn on when i turn key on.


The light bulb is not there, its been removed, did you buy this vehicle from someone else?

Mar 06, 2011 | 1999 Lincoln Continental

2 Answers

How to change a headlight bulb on a 1999 dodge avenger?


You have to open the hood and go at it from behind the bulb. look behind the light fixture set up and you will see where the light bulb goes. Simply twist off and pull out. the old light bulb will com out also.

Apr 14, 2009 | 1999 Dodge Avenger

1 Answer

Left rear brake light stopped working but bulb and fuses are OK.


These are Dual Function Bulbs. They control the Parking Lights and the Brake Lights. This Bulb is Burnt out on the Brake Coil inside the Bulb. I have actually seen Bulbs that were Bad But you could not Tell by jast looking at them. It should be fine with a New Bulb. Please Rate My Response! Thanks!

Feb 05, 2009 | 1999 Ford Expedition

Not finding what you are looking for?
1999 Jeep Wrangler Logo

242 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...