Question about Chrysler Sebring
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
P0732 Gear 2 Incorrect ratio
P1782 P/ES Circuit Out Of Self Test Range
P1787 2-1 Downshift Error
P0700 Transmission Control System (MIL Request) Malfunction
Here is the deal, u have some serious transmission related faults, in order to sort this out u will need to take this to the dealer, allot of testing is required to get to the bottom of this, if I had to guess I would say the trans is going to have to be overhauled.
Posted on Mar 19, 2009
SOURCE: what does code 1-p0650 mean?
P0650 Malfunction Indicator Lamp (MIL) Control Circuit Malfunction
Malfunction Indicator Lamp (MIL) is located on the instrument panel. When the ignition switch is turned ON without engine running, MIL will light up. This is a bulb check. When the engine is started, MIL should go off. If MIL remains on, the on board diagnostic system has detected an engine system malfunction.
Posted on May 10, 2009
PO442 means you have a small leak in your EVAP system. Most common cause is a bad gas cap, replace the gas cap with a factory gas cap,after market fail or does not conform to the OEM EVAP system. Other cause would be small leaks in the EVAP vacuum lines. P0445 is also related to the EVAP system and has detected a large leak in the system. Start with the gas cap as mentioned above. P1685 Is an issue with the ignition not recognizing the ignition keys and the car's ignition immobilizer my activate leaving the car not being able to start. That's going to have to be a Dealer repair. Good luck and hope this helps.
Posted on Jun 15, 2009
FIRST YOU TURN IGNITION SWITCH ON WITH ENGINE OFF.LOOK AT MIL LIGHT IT SHOULD COME ON 3 SECONDS THEN GO OFF IT NOT THEN YOU GOT BURN OUT BULB OR A CIRCUIT PROBLEM.IF ALL IS WELL. ATTEMPT TO START ENGINE.TURN OFF IGNITION. WITH OUT STARTING ENGINE.TURN IGNITION ON OFF ON OFF AND WITHIN 5 SECONDS RECORD 2 DIGIT DIAGNOSTIC TROUBLE CODES.DISPLAYED BY FLASHING MIL LIGHT.YOUR MIL FLASHES WILL BE YOUR CODE LIKE THE MIL LIGHT FLASHES 5 TIMES THEN PAUSE FLASHES 3 TIMES THAT CODE 53 THAT YOUR CODE.IT LIKE MORSE CODE.WHEN DONE TURN OFF IGNITION SWITCH.GO TO AUTO ZONE OR ADVANCE AUTO GET HAYNES COMPUTER CODE BOOK. TO GET CODE MEANING OR WHAT SENSOR GONE BAD.HOPE THIS CAN BE SOME HELP.
Posted on Jul 27, 2009
SOURCE: engine codes P0650 and P0700
po650 malfuction idicator light control curcuit
po700 transmission control system (mil request)
malfuction indicator light is the check engine light
mil request is the same thing
hope this is helpful
Posted on Aug 14, 2009
Tips for a great answer:
Jun 10, 2016 | 2009 Kia Sorento 3.3
May 23, 2015 | 2006 Dodge Dakota
Dec 05, 2011 | 2004 Chrysler Sebring
Jun 25, 2011 | 2001 Chrysler Sebring
Feb 03, 2011 | 1998 Honda Civic
Jan 31, 2011 | 2001 Honda Odyssey
Jul 06, 2010 | 2001 Chrysler Sebring
Feb 09, 2010 | 2001 Chrysler Sebring
Feb 12, 2009 | 2001 Chrysler Sebring
100 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: