Question about 1993 Ford Econoline

1 Answer

How do I get to the heater core on a 250 ford econoline

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

In order to change the heater core on most trucks you have to remove the Air Handling Unit (evaporator case) from under the dash. In most cases you have to remove the entire dash in order to get the case out. (the case is the big black thing under the instrument panel, mostly on the passenger side.) Im order to get the case out you have to remove the nuts from the bolts that go through the fire wall. Next you have to pump down the AC system and unhook the evap. core at the TXV (near firewall). The next step is to remove the heater core lines at the firewall. (ALL 3 of these are done in the engine caompartment.) Now is where you would remove the instrument panel, and the AC system duct work. After all that you should be able to get the Air Handling Unit out. once the caseis out you have to take out the screws that hold the center seam together, and whatever else may be in the way (actuator linkages, wireharnesses, etc, etc.) Once you have "split" the case you should simply be able to pull the heater core out and put in the new. Reverse the process to put back together. Hope this helps.

Posted on Jan 01, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Heater doesn't work in 1995 ford econoline van.


I looked at e150, 5.0L engine.
Does the blower motor work? If so, does the engine reach normal operating temp? If so, are the heater hoses, hot? Circulation through heater core? Next, maybe a temp door under the dash has a problem?

Nov 30, 2016 | 1995 Ford Econoline

2 Answers

In my ford econoline my heater is not working .i replsce the heater core, termostat,tempsensor, heater relay,heater valve and it still not blowing any heat please tell me what the problem could be.


have you checked the heater tap as in when you turn to hot on the dash the tap opens and allows the heated water to pass thru you rheater core?

Dec 31, 2010 | 1998 Ford Econoline

1 Answer

Heater does not work have flushed engine changed thermostat and heat flapper valve


the problem maybe heater core stopped-up. need to see if coolant is flowing thru heater core.and check to see if heater hoses are getting hot near heater core . if take off heater hoses to core with water hose run water thru one side of the hoses to see if water flows thru the other hose.

Nov 19, 2010 | 1998 Ford Econoline

1 Answer

How to install a heater core for a ford f-250


Disconnect heater hoses. Remove glove box. remove cover over heater core. Secured by 8mm bolts. replace heater core.

Nov 04, 2009 | 1987 Ford F 250

1 Answer

Leaking heater core


did u replace the heater hoses as well. When u run your ac an idle up valve raises your rpms slightly whitch will pump more coolant. Other than that they should have nothing to do with one another.

Aug 15, 2009 | 1986 Ford Econoline

1 Answer

Does a 93 econoline passenge van typically have a rear heater.


Yes it does have a heater core. Depending on options and series the core will be on passenger side behind the dash or under hood on passenger side. Just look for your heater hoses and follow them and they will lead you right to it. If you have any trouble let me know and I'll get info you need.

Jul 26, 2009 | 1993 Ford Econoline

1 Answer

1996 econoline heater core


The blower motor is not connected in any way to the heater core. A very basic set of tools should suffice.

Apr 29, 2009 | 1998 Ford Econoline

1 Answer

Need to replace the heater core


Under the dash for sure, but you may need to drop the whole box and may be mounted with bolts from the engine compartment. You will need to disconnect the hoses from the core from under the hood

Mar 26, 2009 | 1998 Ford Econoline

1 Answer

I have a 1991 Ford Econoline van with no heat. Help it's cold out


The hose that comes off the intake should go to the bottom of the core the other runs to the radiator if im correct.

Jan 08, 2009 | 1991 Ford Econoline

1 Answer

1987 Econoline 250 water leaks through fresh air intake into cab!


You may have excessive corrosion somewhere around your battery. Takeout the battery nad check for rust and holes.

Nov 27, 2008 | 1987 Ford Econoline

Not finding what you are looking for?
1993 Ford Econoline Logo

97 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5522 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...