Question about Porsche 944

1 Answer

84 944 front brakes sticking, any ideas ? - 944 Porsche Cars & Trucks

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Porsche Expert
  • 330 Answers

Hello there
for start you should check your brake pads.If they are low it will be good to replace them.
Also check your rotors if they are not worn out .The reason would be if you would replace your br.pads they will not last you to long with bad rotors.
In your case if the brakes are sticking find out which side.I will recomend to bleed the system a see.
Of course the best would be to rebuild the calibers.The brakes are sticking most likely because
the pistons in calibers have some dirt or little rust on them or your dust protectors are broken or have some cuts.
You can also try to lube the pistons in calibers with(if you have )little needle and with someone help (remove one brake pads at a time only),pump the pistons out a little at a time and spray some clean brake fluid behind the dust covers..


proporsche

Posted on Jan 01, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Brake peddle issues & Brakes hugging


I'd start by checking calipers make sure their not sticking

Apr 24, 2014 | Cars & Trucks

1 Answer

My niece has a 1998 Mazda Protege with brake issues. When you step on the brake pedal if feels as the anti-lock brakes are kicking in. The brakes pedal pulses. Any ideas?


What you have sounds like warped rotors. They will cause a pulse or vibration in the brake pedal. This can be caused by:

1. Rotors worn too thin.
2. Riding the brakes and/or constant hard braking
3. Sticking calipers (usually also have a pull to left or right)
4. Worn or out of adjustment rear brakes causing excessive load on front brakes.

Nov 14, 2013 | 1998 Mazda Protege

2 Answers

Brakes lock up after about 10 miles


did you check the brake booster ? how long you use the brake booster? may be have no enough pressure in vacuum brake booster. get more details here for help : http://www.fiverhope.com/
http://www.fiverhope.com/category-67-b0-Brake-booster.html

May 22, 2013 | 2005 Chevrolet Avalanche

1 Answer

1991 dodge dakota front brake sticks


Your brake caliber is sticking,if you replace,replace both.

Aug 22, 2012 | Cars & Trucks

1 Answer

I have a volvo c70 coupe 1999 2.4 auto. My off side front brake is sticking on any ideas to avoid a large mechanical bill please !


best thing to do is replace both front calipers and brake hoses attached to the calipers.you can get rebuilt calipers from a local parts store which are cheaper.

May 26, 2012 | 1999 Volvo C70

1 Answer

Brakes used to stick somehow. by stick i mean that after you come to a complete stop and then u let off on the brake and start to accelerate it doesnt move for a second or two and then you hear a pop noise...


If they are shoe brkes then you can buy a kit to repair the brake cylinder. If they are disc then you need to clean and maybe replace the calipers

Jan 14, 2010 | 1995 Chevrolet C1500

1 Answer

97 4runner---brakes locking up


your rear hub seals are leaking, which leak grease/hub fluid in to the drums which will make them stick.

Mar 02, 2009 | 1997 Toyota 4Runner

1 Answer

Brake problems


Hello.Find out what side is applying.You can check this by lifting the front of the vehicle,then having someone apply the brakes.When the pedal is released,both wheels should instantly release.If one wheel wont turn after the brakes are relesased,that is the problem side.If the caliper is not frozen,then it will probably be the rubber brake hose that connects the caliper to the steal brake line.

Sep 21, 2008 | 1994 Ford Econoline

1 Answer

Brakes


Did you try changing front brake flex pipes, sometimes depending on age of vehicle the pipes can collapse from the inside when brakes are pressed on the pressure is forced down but there is no force to release pressure when let off sometimes causing the calipers to stick on. Assuming that both calipers are new and not second hand I would try replacing flex pipes.

Aug 30, 2008 | 1996 Ford Escort 4 Door

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

160 people viewed this question

Ask a Question

Usually answered in minutes!

Top Porsche Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

907 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Are you a Porsche Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...