Question about 2000 Jeep Cherokee

1 Answer

2000 JGC Stalling

My Jeep won't stay on or start without giving it gas. As soon as you take your foot off the gas the thing shuts off. Please help.

Posted by on

  • yadayada
    yadayada May 11, 2010

    Have you checked codes, you may have a defective idle speed control motor, AKA: Air Bypass Valve.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Check battery. the alternator may be the only thing holding it together. I had a bad cell in mine. Once I changed it the car idled perfectly

Posted on Aug 21, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cherokee will not start until i hold down on the gas as soon as i take foot off it dies immediatly


Might have to reset the codes on the computer. Take the + battery cable off the battery and reconnect it afer 5 minutes. Next try to start the engine without holding the gas petal down, it should start and run rought till the computer resets itself. If engine stops, restart the engine and hold the gas petal down and give it enought gas so it will run smooth, it may take 5 minutes or so for it to smooth out and run at idle speed. If this did not fix the problem, check for a vaccum hose that may be off some where on the engine

Sep 05, 2011 | 2000 Jeep Cherokee

1 Answer

1993 Jeep Grand Cherokee won't stay running without foot in Gas


Have you pulled the code with a OBD II reader ? Please let me know which codes you find.

Feb 10, 2010 | 1993 Jeep Grand Cherokee

1 Answer

2002 JGC stalling at various times.


check the idle sensor and map sensor

Jul 30, 2009 | 2002 Jeep Grand Cherokee

1 Answer

1994 jeep grand cheeroke limited stalling


There is no such thing as a small fuel leak. Even if the car was running great, it is extremely dangerous. You can "section" the line using a small pipe cutter and brass compression fittings if you don't want to change the entire length (providing it's not really rusted. Most of, if not all your problems can definitely attributed to that leak.

Jun 03, 2009 | 1994 Jeep Grand Cherokee

1 Answer

93 grand cherokee 5.2 all time 4wd wont stay runing when put in gear


It sounds like the torque converter is locked up. Possible a bad torque converter or converter solenoid. First thing you should try is unplugging the solenoid plug on the transmission. Drivers side, near the shifter. Not the three pin connector near the pan on the same side. The connector you want is higher than the reverse light plug.

May 30, 2009 | 1993 Jeep Grand Cherokee

2 Answers

2000 jeep grand cherokee won't stay on


Check your Idle Air Control (IAC) Valve; it may need to be cleaned.

Sep 10, 2008 | 2000 Jeep Grand Cherokee

Not finding what you are looking for?
2000 Jeep Cherokee Logo

Related Topics:

84 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...