Question about 2004 Hyundai Santa Fe

2 Answers

My check engine light came on and car died instantly. rented a computer and code came up as p0335 and said crankshaft position sensor a circuit malfunction .Book doesnt even show this code and Auto Zone couldn't find it on the computer. Any ideas or knowledge out there?

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,102 Answers

P0335 is for a faulty crankshaft position sensor. AZone does carry the part but shows special order in my area.

Posted on Jan 01, 2011

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 394 Answers

Hi,
This code is just what your rented scanner said.
http://www.obd-codes.com/trouble_codes/
scroll down and your number is there. Click the number and it explains.

Posted on Jan 01, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Opel Astra H 1.8l sport 2006. The power steering was refurbished and installed (works fine). I drove the vehicle home for about 12kms, the was no power from gear 2 and 3. The vvehicle was very...


Definition of check engine code P0335:
Generic (Common for all car manufacturers):
Crankshaft position (CKP) sensor - circuit malfunction Definition of check engine code P0597:
Generic (Common for all car manufacturers):
Thermostat Heater Control Circuit/Open

Odd codes. Check the wiring loom from the engine.

Nov 02, 2017 | Opel Cars & Trucks

1 Answer

Where is the 2nd crank shaft sensor located, and is there a diagram to show where these sensors are located?


is it a no crank or crank no start?
Possible causes for code P0335
- Faulty crankshaft position sensor
- Crankshaft position sensor harness is open or shorted
- Crankshaft position sensor circuit poor electrical connection
- Signal plate may be damage
- Starter motor may be faulty
- Starting system circuit
- Dead or weak battery

Read more: http://engine-codes.com/p0335.html#ixzz3Cxw6SN6O

Sep 10, 2014 | 2004 Buick Rendezvous

1 Answer

Po335, engine ligt on, slip and vdc brake light on 2005 armada


Error Code: P0335
Description:
Crankshaft Position (CKP) Sensor - Circuit Malfunction
Possible Cause:
Wiring.
Crankshaft position (CKP) sensor.
Engine control module (ECM).

Mar 25, 2014 | 2005 Nissan Armada

1 Answer

Engine management light on trouble code P0335


P0335 - Crankshaft Position Sensor 'A' Circuit Malfunction

Possible causes- Faulty crankshaft position sensor (most common)
- Crankshaft position sensor harness is open or shorted
- Crankshaft position sensor circuit poor electrical connection
- Signal plate may be damage
- Starter motor may be faulty
- Starting system circuit
- Dead or weak battery causing slow engine crank over.

Oct 25, 2012 | 2005 Fiat Punto

1 Answer

Replaced camshaft and crankshaft position sensors in my 2005 altima also the o2 seneor car still will not run. error code 335 What else could be the problem?


DTC P0335 - Crankshaft Position Sensor A Circuit Malfunction
The crankshaft position sensor (CKP) measures crankshaft location and relays this information to the PCM (Powertrain Control Module). Depending on the vehicle, the PCM uses this crankshaft position information to time the spark properly or on some systems it is only for misfire detection and does not control spark timing. The CKP sensor is stationary and works in harmony with a reluctor ring (or toothed ring) that is attached to the crankshaft. As this reluctor ring passes in front of the CKP sensor, the magnetic field created by the CKP sensor is interrupted and this creates a square wave voltage signal that the PCM interprets as crankshaft position. If the PCM detects that there are no crankshaft pulses or if it sees a problem with the pulses on the output circuit, P0335 will set.

A P0335 "check engine light" code could be caused by:
Damaged CKP sensor connector
Damaged reluctor ring (missing teeth or not turning due to sheared-off keyway)
Sensor output open
Sensor output shorted to ground
Sensor output shorted to voltage
Failed crank sensor
Broken timing belt
Failed PCM

If you need additional details about test and solutions, just contact us in the Code Link.

Hope this helps; also keep in mind that your feedback is important and I'll appreciate your time and consideration if you leave some testimonial comment about this answer. Thank you for using Fixya, and have a nice day.

Jose.

Oct 21, 2011 | 2005 Nissan Altima

1 Answer

P0335 code,05 kia rio, changed crank sensor, did not help?


Did you do a crank relearn ? Could be a wiring issue , control module problem etc... Testing electrical circuit first , video's on youtube , all you would need is a DVOM - digital volt ohm meter . P0335 Kia Crankshaft Position Sensor Circuit c Replacing Crankshaft Position Sensor Code P0335

Jun 05, 2011 | 2005 Kia Rio

1 Answer

2001 Oldsmobile Aurora Codes P0302, P0335, P385, P0386


p0302 Misfire cylinder two

p0335 CKP Sensor 'A' Circuit Malfunction

p0385 Crankshaft Position (CKP) Sensor B Circuit

p0386 Crankshaft Position Sensor B Circuit Range/Performance

Make sure your crankshaft sensor is plugged in or replace the sensor if the plug is good.

Jun 05, 2011 | 2001 Oldsmobile Aurora

1 Answer

My problem with my JEEP Liberty 2004 is p0335


Diagnostic Trouble Code (DTC) P0335

Magnetic Crankshaft Position Sensor Electrical Error



In this circuit DTC (data trouble code) sets when


a) The magnetic crankshaft position sensor is > 0.2V.

Or when


b) The minimum value of magnetic crankshaft position sensor is

Or when

c) The maximum value of magnetic crankshaft position sensor is higher than 2.2V.

Feb 18, 2011 | 2004 Jeep Liberty

1 Answer

Error code P0335 (2005 pt cruiser)


p0335 is crankshaft position sensor circuit fault code..possible just a faulty sensor,shouldn't set a circuit code if timing is off..a sensor is probably around a 100 bucks..located just above starter in block

May 18, 2009 | 2005 Chrysler PT Cruiser

Not finding what you are looking for?
2004 Hyundai Santa Fe Logo

1,014 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8516 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...