Question about 1998 Chevrolet Blazer

1 Answer

How do i know if the iac valve is bad - 1998 Chevrolet Blazer

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 6,826 Answers

Disconnect the iacv and if the idling performance doesn't change from what you are experiencing then it may not be turning or the passageways are clogged and need to be sprayed out with cleaner.

One can test the continuity of the iacv to see if it is within specifications using a multimeter.

One can turn the a/c on and if the car stalls, then the iacv may not be working.

Good luck on this diagnosis.

Posted on Jan 01, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you know if your ecm is bad?


most likely the IAC valve is bad , which damaged the ECM also. Have replaced couple of ECMs for this code in 2003 pathfinder. P0507 is an ICS code , which is linked to faulty IAC valve., but the ECM is an issue also, most likely. Find ECM on ebay. and replace the IAC valve with new one.
Wait one minute, your model pathfinder also has giant recall for strut towers rotting out, so have your local dealer check your VIN for the campaign. if the car is rotted beyond repair in certain areas by the struts, Nissan will buy the car back and give you money for it. Check the vin with your local dealer.

Jul 26, 2016 | 2003 Nissan Pathfinder

2 Answers

What is an IAC Valve


Google is your friend in such questions.

  • Idle air control actuator - Wikipedia, the free encyclopedia https://en.wikipedia.org/wiki/Idle_air_control_actuator An idle air control actuator or idle air control valve (IAC actuator/valve) ... Idle air control actuator; MAP sensor; Mass flow sensor; Oxygen sensor; Starter motor;
  • how to tell if your iac valve is going bad - YouTube www.youtube.com/watch?v=oNO8GCN8jQA
    • BY TIMMY102345
    • 6 MIN
    • 939K VIEWS
    2009-09-07 · Video embedded · how to tell if your iac valve is going bad timmy102345. ... #372 Better repair method Toyota Camry Idle Air Control Valve - ...
  • 4 Ways to Check an Idle Air Control Valve - wikiHow www.wikihow.com/Check-an-Idle-Air-Control-Valve
    • 525K VIEWS
    2015-12-11 · How to Check an Idle Air Control Valve. ... Again, an idle air control valve can have an issue or fault without triggering a check engine light. 2.


  • There are also videos in this link. How to check and fix.

  • What is an IAC Valve Bing video

    May 12, 2016 | 1992 Toyota Paseo

    1 Answer

    Where do the iac sensor is on the engine of a 2.7 Toyota quitim petrol


    John, IAC normally connected on throttle body, could be on under side. Check the attached links,instruction and guides, Good luck
    "I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
    Car Parts Diagram
    99 4Runner IAC Cleaning
    Symptoms of bad IAC valve

    Feb 05, 2016 | Toyota Cars & Trucks

    2 Answers

    2002 ford explorer 4.0 xls, shuts off when coming to a stop and also when switchin from drive to reverse. the engine also smokes at the exhaust manifold I'm guessing


    Sounds like a possible idle air control problem (IAC) The smoke probably has nothing to do with the idle problem. Possible valve cover leak??

    Feb 23, 2015 | 2002 Ford Explorer

    3 Answers

    Need to fix p1504 code on lincoln zs v8 2001


    P1504 Idle Air Control Circuit Malfunction, take off the idle air control and inspect the inside. the pintle inside can get dirty and cause it to get stuck. try cleaning it out with some brake clean and see if it helps. dont spray it ont he electrical connection though.

    Aug 05, 2011 | Lincoln LS Cars & Trucks

    1 Answer

    Idles high what can i do.


    Get the IAC valve checked.Remove the Iac valve from the throttle body. It is on the side facing the front higher than the tps sensor. It has a 4 wire connector. Make sure this is clean. If it is dirty/dusty then clean it. This valve controls the idle speed. After cleaning it turn the ignition on with the engine off. The Iac should move in and out to find the stops. If it does not move you have either bad wiring, Iac or pcm. Most likely is Iac.
    -------- For safety measures,before removing the IAC make sure you don't have any vacuum hoses unplugged. Next make sure the throttle blade closes all the way.Iac is short for idle air control valve. ------- Thanks.Helpmech.

    Nov 13, 2010 | 2000 Cadillac DeVille

    1 Answer

    Whats will my car do if the idle air control valve goes bad


    The engine will idle very rough or it will die at idle.

    A simple way to test, try removing the IAC valve completely from the intake manifold, leaving an exposed opening to let air in the manifold. If the engine idles ok with the IAC removed, you'll know it's a problem related to the IAC. You will need further testing to determine if the problem is with the IAC valve itself or with its circuit.

    Mar 24, 2010 | 1994 Chevrolet Camaro

    1 Answer

    Where is idile valve air control sensor located on the 1998 beetle


    Hi there,

    Well please follow the below link to check out the position of idle valve -

    http://www.freeengineinfo.com/idle-air-control-valve-replacement.htm

    The Idle Air Control (IAC) valve controls the engine idle speed and dashpot functions. The valve is located on the side of the throttle body. This valve allows the necessary amount of air, as determined by the Powertrain Control Module (PCM) and controlled by a duty cycle signal, to bypass the throttle plate in order to maintain the proper idle speed.

    TESTING
    Turn the ignition switch to the OFF position.
    Disengage the wiring harness connector from the IAC valve .
    Using an ohmmeter, measure the resistance between the terminals of the valve.

    NOTE: Due to the diode in the solenoid, place the ohmmeter positive lead on the VPWR terminal and the negative lead on the ISC terminal.
    If the resistance is not 7–13 ohms, replace the IAC valve.

    The following symptoms can be caused by a faulty IAC due to loose connections, bad grounds, high resistance in the circuit, or opens in the circuit.
     
    REMOVAL & INSTALLATION
    Disconnect the negative battery cable.
    Disengage the wiring harness connector from the IAC valve.
    Remove the two retaining screws, then remove the IAC valve and discard the old gasket.

    To install:
    Clean the IAC valve mounting surface on the throttle body of old gasket material.
    Using a new gasket, position the IAC valve on the throttle body. Install and tighten the retaining screws to 71–106 inch lbs. (8–12 Nm).
    Attach the wiring harness connector to the IAC valve.
    Connect the negative battery cable.


    Good Luck!!

    Thanks

    Jan 01, 2010 | 1998 Volkswagen Beetle

    1 Answer

    I need to know where the idle adjustment screw is on a 92 Saturn SL1 and what wrench to use.


    its located on the throttle body connected to your air intake manifold where your throttle cable connects on the throttle body there is a adjustment screw connected there

    Nov 03, 2009 | 1992 Saturn SL1

    1 Answer

    Ac problem


    Possible base idle adjustment or bad IAC valve. Could also be the A/C circuit. Check to see if the cars idle goes up when you are still and at idle. The idle should come up some, maybe about 150 rpm's or so. If that's OK, that I would have your base idle checked along with the IAC valve circuit and the valve itself. Let me know wht you find.

    Aug 27, 2008 | 1993 Nissan Sentra 4 Door

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    279 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Chevrolet Experts

    yadayada
    yadayada

    Level 3 Expert

    77169 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22258 Answers

    Ronny Bennett Sr.
    Ronny Bennett Sr.

    Level 3 Expert

    6927 Answers

    Are you a Chevrolet Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...