Question about 1986 Dodge D150

2 Answers

1986 Dodge D-150, 318, no owners manual. How many quarts of oil does this engine take? Some say 5 others 6.

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 6,826 Answers

According to Autozone.com your 5.9L or 5.2L engine takes 4 quarts without the filter, and uses 5+ quart jug for an oil and filter change.

I would add 5 and then top it off with the aid of using the dipstick when changing the oil and filter.

Posted on Jan 01, 2011

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 22,156 Answers

Around 5 litres i would expect

Posted on Jan 01, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

93 dodge Le 4wd automatic ex.cab 2.5/318. What are engine oil and tranny fluid capacities?


Engine oil should be 5 or 6 quarts with the filter, and automatic trans is 4 quarts with filter and about 12-14 quarts total.

Nov 06, 2015 | Dodge Cars & Trucks

1 Answer

How much oil does it take to fill up


didnt specify engine size 4 cylinder takes 4 quarts----the 6 cylinder takes 5 page 5-93 of your owners manual the following is your owners manual for additional information

2005 Chevrolet Malibu Owner Manual

Aug 26, 2015 | 2005 Chevrolet Malibu

1 Answer

How much oil


Dpends on the engine for EXACT quantity but, all the engines will right around 5 quarts. If you overfill by a 1/4 - 1/2 a quart you are still ok. These engines (either 4, 6, or the 8 cylinders) are going to about the same size sump/oil pan. Any more than that and you could cause issues. So, dump 5 quarts and close the hood, good to go!

Oct 14, 2010 | 1996 Dodge Dakota

1 Answer

How do you change the oil on a 2006 chevy colorado


This is for the 5 cylinder 3.5 liter engine in the Colorado

1. The drain plug is in the middle of the oil pan on the drivers side.
Use a 15 mm socket or box end wrench to remove the plug. Drain
oil.
2. The oil filter is at the bottom front corner of the engine on the passenger side. Remove the filter. Try not to tip the filter when you
remove it so you don't get oil on other parts of the truck.
3. Rub a small of oil on the gasket of the new filter. Spin on the new filter, 3/4 to 1 turn past when the gasket starts to seat. Hand tighten
only.
4. Reinstall the drain plug. DO NOT OVER TIGHTEN OR YOU COULD
STRIP THE THREADS.
5. Add 6 quarts of oil to the oil filler tube located on top of the engine
in the front and middle of the engine compartment. It shows the location
in the owners manual. Install the filler cap.
6. Start the engine and let it run a few minutes to fill the filter with oil.
Turn off the engine and wait a few minutes for the oil to drain down to
the bottom of the engine. Remove the dip stick and check oil level.
Checking oil level is in the owners manual.

Aug 10, 2010 | 2006 Chevrolet Colorado

1 Answer

My oil stick is at the add line. How much oil should I put in? And what kind of oil? Dont know the oil compacity on the engine.


You do not list the engine size. This truck comes with 3 engines. 5.4 V8, 7.3 Diesel, and a V10. Your owner's manual will list the capacity. The add mark normally means add 1 quart on a V8. Add 1/2 quart wait 5 minutes and check the level again. The 5.4 L V8 capacity is 6 quarts of 5w20 with filter change. If it is a diesel then it requires a special oil for diesels which is 15w40 weight and it holds 14.5 quarts.

Jun 13, 2010 | 2001 Ford F250 Super Duty Super Cab

3 Answers

How much oil do i put in my truck right after i do an oil change auto zone said 3 buckets of oil . but isnt that too much for an ford f250 94-95


The most these trucks take is six and a half U.S. quarts of oil.The safest way to know for sure is to drain all the oil out, remove and install a new oil filter, then install five quarts of your preferred oil.Start the vehicle up and let it run for thirty seconds, then turn it off.Pull the dipstick out and check the level with the engine not running, then top off the oil as necessary.Run it for five minutes to verify that there are no oil leaks, Then Happy Motoring!!! Hope I could help!!!

May 15, 2010 | 1995 Ford F250

3 Answers

Im doing my brothers oil. how much do i need, 1994 grand cherokee


i buy the 5 quart jug i drain it all fill it with about 4 quarts start it let it run for about 30 seconds then shut off wait 5 minutes check oil fill as needed. then remember how many quarts it took. there 4.0 v6 is usualy 5 quarts. but do as stated to be for sure. then you have the empty jug to put used oil in for recycle.

Apr 23, 2010 | 1993 Jeep Grand Cherokee

2 Answers

Just need info about changing transmission oil in 1996 Ford Crown Victoria LX. I'm not familiar with type of Transmission oil to use and how many quarts it holds and location of the drain plug.


You will need to drop the trans pan to drain. In turn you will need a trans filter kit which will include the filter and gasket. As far as fluid, it will require mercon dexron auto trans fluid, and will take about 6 quarts. What I normally do is fill with 5 qts and check, then add half qt at a time till full, which is normally 6 qts.

Oct 08, 2009 | 1996 Ford Crown Victoria

3 Answers

Does the crown vic police intercepter take as much oil as the regular crown vic? (when changing the oil and filter)


I ~think~ the 1999 is the same as the 2000 (mine is a 2000 P71)

The 2000 CVPI (Crown Vic Police Interceptor) owners manual recommends the following:

Engine Oil - Motorcraft SAE 5W-30 Super Premium Motor Oil 5.0 quarts

Transmission Fluid - Motorcraft Mercon V ATF 13.9 quarts (fluids Mercon & Mercon V are NOT INTERCHANGEABLE, DO NOT MIX)

Fuel Tank - 19.0 gallons

Break Fluid - DOT 3


Rear Axle Lubricant - Motorcraft 80W-90 Premium Rear Axle Lubricant 3.75 pints (add 4 oz of Additive Friction Modifier C8AZ-19B546-A or equilavent meeting Ford Spec. EST-M2C118-A for complete refill of Traction-Lok Rear Axles)

Engine Data - 4.6L V8 Engine
Cubic Inches - 281
Required Fuel - 87 Octane
Firing Order - 1-3-7-2-6-5-4-8
Spark Plug Gap - 1.3-1.4 mm (0.052-0.056 inch)
Ignition System - Coil On Plug
Compression Ratio - 10.0:1

I hope this helps!

Jun 27, 2009 | 1999 Ford Crown Victoria

2 Answers

Change oil & filter - Dodge Ram b150 van


you will need at least 5 or 6 qts. you can decide on the oil filter and the kind of oil to buy, they have valvoline, pennzoil, exxon, all kinds and the oil filter, they sell purolator, ac, fram,(fram is what i buy). if its got high miles, then use high milage oil.

May 15, 2008 | 1987 Dodge Ram Wagon B150

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

581 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...