Question about 1991 Audi 100

1 Answer

I need help getting my drivers side door panel off. i got the arm rest and window control panel off, but there is apparently a nut underneath the wooden trim, i still cannot get it off.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Audi Master
  • 22,219 Answers

Its so old this car a i cannot remember correctly ,havent seen one of this model for at least 5 yrs ,anyway if i remember rightly the door panel comes off first then the wooden trim ,its held on with 2 nuts 10mm heads

Posted on Jan 01, 2011

  • frarya Jan 02, 2011

    I ended up getting it off, the wooden trim doesn't come off, there is a screw inside the inner door handle cup. when you take that out theres another screw and then it pops off.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

4 Answers

2001 ontiac Montana Van front power windows only working sporadically, is it a short or does something need to be replaced?


Check for child saftey lock out switch on the drivers side you will see it near the other window controls .

Jul 07, 2014 | 2003 Pontiac Montana

1 Answer

Replaceing driver side mirror


Hello,

The nuts and bolts you need to get to are located on the interior side of the door. There may be a plastic triangle that looks like part of the door panel, but can be removed separately from the door panel, and other times you have to take the whole door panel off.

Most door panels are screwed into the door at the arm rest (usually underneath the arm rest, sometimes hidden by little panel colored plugs, and also screwed at the handle that opens the door. Once you get all the screws out, pull the panel from the bottom to unclip the plastic clips that hold it on, then work your way to the top. The top of the panel has a lip that sits over the ledge and hangs into the crack where the window is. Once the panel is off you will see the nuts you have to loosen to get the mirror off.

I hope this helps!

Mike

Dec 30, 2011 | Cars & Trucks

1 Answer

I need to replace my drivers side passanger window, attempted break-in, how do i get started?


you'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. then pull off the seal (won't be able to reuse) and you can get to the inners of the door. You'll need to lower the window a bit so you can see the arm the window rests on and you just need to remove the clips / bolts holding the arm to the window. to get the new window in, you'll have to slide it through the top ****

Aug 19, 2009 | 2008 Ford Taurus X

1 Answer

The power widow, window/door locks, & mirror control switches, all located in the driver's side door panel, spontaneously stopped working. i'm assuming that the power supply has disconnected, but can't...


You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge.

Aug 16, 2009 | Hyundai XG300 Cars & Trucks

1 Answer

Drivers side window control cluster


The control may have gone bad... You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. Then you can disconnect the controls and test them

Aug 09, 2009 | GMC Denali Cars & Trucks

1 Answer

Drivers side mirror replacement 02 Rendezvous


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

Apr 26, 2009 | 2002 Buick Rendezvous

2 Answers

HOW TO REPLACE A SCION XA DRIVER SIDE SIDE MIRROR?


Strange my 2006 does not require the door panel removal at all. There is a small triangular panel that specifically covers the bolts (10mm) that hold the mirror in place. There are 3 total and a quick electrical connect that need to be removed / disconnected. On my car this panel houses a tweeter.
Carefully pop the panel off with a screwdriver, remove the 3 nuts and disconnect the electrical. Replace in reverse order

Apr 05, 2009 | 2005 Scion xA

1 Answer

Trying to take off arm rest on right do to take off door panel.


i've done this twice. 1/2 the pain is getting the door panel off.
At the point where the arm rest meets the door panel by the door handle there will be a small section where a little light shines on the door handle. you need to put a small screw driver in behind the light an pry this gently away from the door panel. this will reveal a small bolt that must be removed.

Behind the door handle itself there is a small panel that must be pried off as well. you will see a slot on the front of this to stick your screw driver and again push in as you pry back this piece of plastic. this will reveal a screw that must be removed also. just below the door handle, you must also pry off the lock lever as it sits on a rod that work the mechanism to lock/unlock the door.

If you have electric windows, there is a slot in the mounting bracket that you can stick your screw driver in a little and pry this up and out as you must remove the window and lock wires to get the panel off.

Now, there are a series of plastic push clips around the bottom of the door panel. You should be able to stick your fingers between the door panel and the door to pull these away from the door. Don;t use a screw driver for this as you will prob tear the panel. When you get it away from the bottom, do a curl with the door panel from the bottom as it is clipped on the top by the window.

Also, search for "door panel removal on the 1999 Pontiac bonneville" and you may be able to get some pics.

hope this helped.

Oh forgot, good luck getting to the nuts that hold on the mirror. you need someone with small hands and some funky wrenches to reach them.

Mar 02, 2009 | 1999 Pontiac Bonneville

1 Answer

Driver side window quick working


Remove the arm rest on the door which has screws in it and then unplug the window switch to the window. Then you pull on the door cover....it has plugs on the other side that will snap out and snap back in when putting it back on. You can now look down into the door and see the motor...there will be two or three nuts that need to be removed with a nut driver...one you may have to drill a small hole in the door to get to one of them. Once you've done that you can remove the motor...then the fun begins...replacing the motor is just the opposite of removing it...getting the nuts back on is the hard part because it's on the inside of the door, once you've done that everything is a breeze to put back together.

Jan 05, 2009 | 1999 Chevrolet Lumina

1 Answer

1988 Cadillac Deville drivers window shattered while up


Take the Lights out of the arm rest and you will see more screws.

Dec 09, 2008 | 1988 Cadillac Sedan DeVille

Not finding what you are looking for?
1991 Audi 100 Logo

Related Topics:

90 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audi Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

yadayada
yadayada

Level 3 Expert

76673 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14380 Answers

Are you an Audi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...