Question about 1996 Nissan Pickup

1 Answer

Can i just simply convert the hydraulic steering gear of my 1996 nissan pickup to manual steering without changing my hydraulic steering gearbox?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 223 Answers

Well, you can just unhook the hydraulic, but what you'll have is just the same as you'd have if the steering pump belt broke or if the pump lost its oil: really stiff steering.

If this is OK with you then it'll work fine. If it's too stiff then you'll want to change the gearbox.

lp

Posted on Jan 01, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have problem with my Nissan terrano 2 mechanical gearbox. It's hard to put to 1st gear. From 1'st to 2nd, 3rd, 4th, 5th, are also hard. Is it necessary to change clutch?


not a clutch problem unless you have just done a clutch kit change
more likely a hydraulic clutch problem ( air in the system) or master cylinder needing replacement .
if it is a cable operated clutch , replace the clutch

Dec 14, 2016 | Nissan Cars & Trucks

1 Answer

Why will my manual transmission not go into gear when vehicle is running ?


They sold you a bad transmission it should of grabbed the gear instantly and smoothly..

Mar 21, 2016 | 1985 Nissan Pickup

2 Answers

How can I fix a Nissan liberty automatic not changing gears when it gets hot


Hi sad to say this gearbox requires valve body repairs ,replacement of dextron 3 ATF fluid and filter.clutches and friction plates should be checked replaced if worn.Torque converter should be checked out.If gearbox has electronic functions a diagnostic report should be done before stripping.A conventional auto gearbox pre 2000 model could be fitted with a external modulator switch causing present fault ,over powering the above mentioned faults.

Apr 05, 2015 | Nissan Cars & Trucks

1 Answer

Can you turn on and off the overdrive on a 98 ram 1500


I have never known an overdrive that cannot be switched on or off at will or engaged or disengaged.

There are two definitions of overdrive and in the philosophy of some people the fifth gear is an overdrive.
The conventional manual gearbox, because the first motion shaft is locked to the third motion shaft in the top gear ratio, any supplemental ratio that has a ratio higher than 1:1 is considered an overdrive ratio.

The more traditional definition of an overdrive is a supplementary gearbox that can be incorporated into a normal manual gearbox to provide a single overdrive ratio for the purpose of quieter and more economical cruising.
The early overdrive was cable operated by a large chrome-plated dashboard-mounted handle. Later overdrives were hydraulic units that could be switched in or out by electricity, often by the means of a steering column-mounted switch or by a tiny switch incorporated into the gearknob.

A typical installation included an inhibitor switch mounted on the gearbox which prevented overdrive operation in the lower ratios when the benefits would be dubious.
Sometimes a lower than standard final drive ratio would be used and the overdrive ratios which typically could be selected whenever third or fourth gear was selected could be used together to produce something like a six speed close ratio gearbox which was hitherto unheard of when some of the rest of the world was still using "three on the tree" type three-speed gearboxes.

Most manufacturers had dispensed with overdrives by the end of the 1970's due to the weight and added expense, in favour of the now common five-speed gearbox, though Nissan incorporated an overdrive ratio into their automatic transmissions to compensate for torque converter slip when fuel costs began to rise disproportionately.

If you have an overdrive unit fitted to your car that doesn't work, I advise starting the diagnostic process by checking through the electric circuitry, wiring, switches and solenoid.

Feb 12, 2015 | Cars & Trucks

1 Answer

Why the manual gearbox cannot easily changed to the drive gear? why it is hard?


if it is manual transmission and hard to put it on gear, have clutch checked for adjustment, bleed the hydraulic system, or possible clutch failure.

May 09, 2014 | 1988 Toyota Land Cruiser

1 Answer

Manual 5 speed jump into gear while depressing clutch pedal


check the fluid in the clutch system (if hydraulic) (replace cable if manual). Bleed air out of system replace the clutch master cylinder.

Nov 29, 2013 | 1996 Nissan Pickup

1 Answer

Vehicle dies when downshifting to first gear and also makes a squeling noise


Manual Transmission

  1. 1
    Park your car with its front tyres touching the curb. Engage 1st and start slowly releasing the clutch pedal without applying any throttle. The engine should gradually fade out and bog down when the pedal is completely released. If the engine just bogs down at some point, or the fading is not gradual, the clutch is damaged. If the gearbox grinds when you try to shift in first from a standstill, there's a damage in the clutch too.
    550px-find-out-if-a-transmission-has-gone-out-step-1.jpg


  2. 2
    Try to pull off in 3rd gear with the front wheels at the curb, and without applying throttle. If the engine doesn't die, it shows a complete clutch failure. In that case, do not drive this vehicle.
    550px-find-out-if-a-transmission-has-gone-out-step-2.jpg
  3. 3
    Find a smooth, straight road to test the vehicle. Start from first, and slowly accelerate from second. As you do this use late-shifting, i.e. slightly over-rev the engine (approx. 500-1000 RPM faster than the revs you'd normally shift at). Up-shift to second without using double-clutching. Repeat the same procedure when shifting into 3rd. Now, with your car running at approximately 50 km/h (25 mph) try down-shifting to second without double-clutching. Both the up-shifting and the down-shifting must be done without grinding. Grinding of the gears indicates a gearbox malfunction, most likely in the sync gears ("synchronizers"). To make sure it's the synchronizers, try up-shifting and down-shifting with double-clutching. If the grinding stops, then it's the synchronization.
    550px-find-out-if-a-transmission-has-gone-out-step-3.jpg
550px-find-out-if-a-transmission-has-gone-out-step-4.jpg
  • 2
    Shift into drive and hold the break pedal after making sure your brakes work. Press the gas pedal all the way down. The engine should not fade. If it does, it means the transmission (particularly the clutch) does not disengage completely.
    550px-find-out-if-a-transmission-has-gone-out-step-5.jpg
  • 3
    Check for smooth shifting. On an even and relatively horizontal road you should be able to accelerate without any tangible jolts. If there are such, the gearbox has malfunctioned.
    550px-find-out-if-a-transmission-has-gone-out-step-6.jpg
  • 4
    Check for vibrations. Driving at about 70 km/h (35 mph) switch to Neutral (both auto and manual). There shouldn't be any lateral vibrations. If there are, this is either due to a warping of the drive-shaft, or a suspension damage. Basically, drive-shaft warping is perceived as a vibration in both vertical and horizontal direction, whereas a suspension damage is felt as a vibration in only one direction (i.e. either horizontally or vertically).
    550px-find-out-if-a-transmission-has-gone-out-step-7.jpg
  • 5
    Test steering. When trying to enter a corner with approximately 30 km/h (15 mph) there shouldn't be any tangible under-steer. The presence of such may be due to a differential failure, especially in FWD cars. Novice drivers must never try and test their differentials by trying to induce under/over-steer!
    550px-find-out-if-a-transmission-has-gone-out-step-8.jpg
  • EditTips for preventing transmission damages

    • Avoid prolonged driving by slipping the clutch.
    • Avoid jerks and jolts while driving.
    • Avoid "riding the clutch", i.e. needlessly keeping your foot on the clutch pedal.
    • Never use clutch slipping for regulating the speed of a heavy truck!
    • Make sure the clutch of a manual transmission is fully pressed when shifting
    • Do not use excessive force when shifting a manual.
    • For rear wheel drive (RWD) vehicles, avoid driving through places at the minimum of the vehicle's clearance.
    EditTips

    • Incomplete disengaging is due to the trailing disc sticking to the leading one, e.g. because of mechanical soiling of the friction surfaces or worn out springs.
    • Incomplete disengaging in automatic transmissions is felt as a forward jolt when the gearbox changes gears, whereas incomplete engaging is felt as over-revving the engine without any significant change in speed, especially when stepping on the throttle at high speeds (over 50 km/h or 30 mph).
    • Automatic transmissions have the so-called "hydraulic clutch". It's basically a combination of a hydraulic pump, driven by the engine, and a hydraulic motor, linked to the rest of the drive-train. This allows for the hydraulic liquid to flow through the motor, even if its load is too big for the engine to rotate it. This eases operation, but results in poorer acceleration, greater fuel consumption and severely decreased ability of the driver to use engine braking, which can be very dangerous on long downward slopes. Hydraulic clutches are easier to operate in urban driving, but become a drawback on long roads
    • Gearboxes come in three types: manual, semi-automatic, and automatic
    • Malfunctions in a hydraulic clutch include incomplete disengaging (due to old hydraulic fluid, which has become thicker than specified by the manufacturer), or incomplete engaging (most often due to a leak of hydraulic fluid or presence of an air pocket within the hydraulic circuit. These are both dealt with by replacing the hydraulic fluid, bleeding (if necessary) of the hydraulic system, and removing any possible leaks.
    • The most common malfunction of a dispatch box is the inability to change its function (e.g. switch between 4x2 and 4x4) If this happens, refer to a repair shop.
    • The clutch is designed to smoothly disconnect the engine from the rest of the drive-train.
    • The clutch disengaging too low or too high is an indication of a worn out trailing disc.
    • There are implements that allow an automatic gearbox to operate in semi-automatic mode, allowing the driver to manually shift gear up or gear down, but w/o using a clutch. These operate exclusively by aids of electronics. This is common in high-class German cars like the S-Klasse Mercedes. Usually the corresponding position of the lever is marked with T or M and the driver selects a gear down by moving the lever to the left, and a gear up by nudging it do the right.
    • Semi-automatic gearboxes are combined with a hydraulic clutch. They allow the driver to select a gear up or a gear down. These are most often seen in rally cars, where there are two levers on both sides of the steering wheel. Usually the right one switches a gear up, and the left one switches a gear down.

    Aug 23, 2013 | 1995 Suzuki Sidekick

    2 Answers

    When starting, clutch down 1st gear turning key truck jumps forward, will start but need to be ready to take off in gear that started in. starts fine in neutral.but won't go into gear without grinding


    1st check your clutch system, that is most probably where the issue is as the gearbox rarely ever gives issues

    2nd check the oil for your gear box. the oil should help the gears as they move into action or move out.

    Mar 31, 2011 | 1985 Nissan Pickup

    1 Answer

    What trans fluid is in 84 nissan pickup manual trans


    No transmission fluid are ever used in manual transmissions.
    Gear oils are used. And the specification is:
    Gear Oil 80/90W

    You would need to park the truck on a level ground in order to do this job.
    Remove the filler-plug on the side of the gearbox, and using a hand-pump or a rubber hose, fill the gearbox with the specified oil. Once the gear oil starts to flow out through the side filler-plug, stop! The required quantity is reached.
    Replace the filler-plug and start the car to check for leak.
    Be careful so you don't accidentally get unwanted item in the bearbox.

    Dec 18, 2009 | 1984 Nissan Pickup

    1 Answer

    Nissan Maxima LE 1996 stall on incline


    1.Could be a torq converter or a vacuum leak.2Also could be the converter or a tune up or both.3Sounds like a wire shorted behind the stereo.4It could be the power steering pump going out.

    Oct 06, 2008 | 1996 Nissan Maxima

    Not finding what you are looking for?
    1996 Nissan Pickup Logo

    Related Topics:

    146 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Nissan Experts

    yadayada
    yadayada

    Level 3 Expert

    75077 Answers

    Phil Lovisek
    Phil Lovisek

    Level 3 Expert

    705 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22095 Answers

    Are you a Nissan Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...