Question about 2000 Buick LeSabre

1 Answer

Where is the water outlet located ? - 2000 Buick LeSabre

Posted by on

  • Patrick  Bogan
    Patrick Bogan Jan 01, 2011

    If your talking about the radiator cap...it may not have one. You fill the radiator through the overflow bottle. If you are referring to something else, please post back.

    Theroadisalover

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

Located on the driver side. Bottom facing engine. It is small and somewhat hard to reach. You will have to jack the car up to get to it. And it's plastic. New radiator is about $125.00

Posted on Jan 01, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the thermostat located?


The thermostat should be in the water outlet. The water outlet connects the engine to the upper radiator hose. When the cooling system thermostat is located at the outlet it is sometimes called the thermostat housing. Most water outlets are aluminum but can also be made of cast iron, steel or nylon.
see below:

IF THE VIDEO HELPS PLEASE LIKE IT TO HELP THE POSTER of that video OUT (I found it only) .

https://www.youtube.com/watch?v=JEoLFrg8IUI


https://www.google.com/search?q=2006+saturn+vue+2.2+thermostat+location&biw=1440&bih=805&tbm=isch&tbo=u&source=univ&sa=X&sqi=2&ved=0ahUKEwi7xJ3QnZHKAhUSwGMKHXnYCKQQsAQIGw

Jan 04, 2016 | 2006 Saturn Vue 2.2

1 Answer

Water leaking in floor board when a/c on in mazda mpv 2001


You probably have a plugged drain outlet for your under dash heater/AC unit....system is designed to drain moisture from AC evaporator core via the drain outlet...drain outlet is located under the hood

Thru the firewall and is a (approx) 1/2" dia rigid plastic tube. Sticks thru, toward the rear of the engine, about 1". It's located so that it spills (nice!) onto the most rear engine/tranny mount. There's evident rust to prove it. Try to remove it and the water should pour out . Try to locate the drain by looking where the arrows are pointing to on the pictures I am supplying

1d4363cf-13f8-4af3-a2b2-ecb08cfd6711.jpg 8b16ada2-2a73-4695-b050-f5e63bc38830.jpg

Jul 14, 2014 | 2001 Mazda MPV

1 Answer

How do you install a thermostat on a 2001 suburban?


  1. Standing in front of the vehicle it's on the left front side of engine kind of low.
  2. Be sure to get a gasket as well.
  3. Drain the cooling system.
  4. Loosen the air cleaner outlet duct clamps at the following locations:
    • Throttle body
    • Mass airflow/intake air temperature (MAF/IAT) sensor
  5. Remove the radiator inlet hose clip from the outlet duct.
  6. Remove the air cleaner outlet duct.
  7. Reposition the outlet hose clamp at the water pump.
  8. Remove the outlet hose from the water pump.
  9. Remove the water pump inlet bolts.
  10. Remove the water pump inlet and thermostat from the water pump. Water pump inlet/thermostat assembly location
To install:

  1. Install the thermostat and water pump inlet to the water pump.
  2. Install the water pump inlet bolts.
  3. Tighten the water pump inlet bolts to 11 ft. lbs. (15 Nm).
  4. Install the outlet hose to the water pump.
  5. Position the outlet hose clamp at the water pump. NOTE
    Important: Align the arrow at the throttle body end of the duct with the throttle body attaching stud.
  6. Install the air cleaner outlet duct.
  7. Install the radiator inlet hose clip to the outlet duct.
  8. Tighten the air cleaner outlet duct clamps at the following locations:
    • Throttle body
    • Mass airflow/intake air temperature (MAF/IAT) sensor
  9. Tighten the air cleaner outlet duct clamp screws to 62 inch lbs. (7 Nm).
  10. Fill the cooling system and check for leaks.

Read more: http://wiki.answers.com/Q/Where_is_the_thermostat_located_on_a_2001_chevy_suburban#ixzz1TvIO3kpD

Aug 03, 2011 | 2001 Chevrolet Suburban

1 Answer

Where is the thermostat located?


follow the upper hose from the radiator to the motor it is under the housing on 3.0 L motor take out 3 bolts to remove.
for a 3.8 L motor remove upper radiator hose and remove the water outlet connection bolts and lift water outlet clear of engine.
remove thermostat by rotating it counterclockwise in the water outlet connection until the thermostat becomes free to remove.

to install make sure water outlet pocket and mating surfaces are clean.
install the thermostat into the water connection by rotating it clockwise until the engaging ramps on the thermostat are secure.

install the water outlet connection on the intake manifold with a new gasket and tighten the mounting bolts to 15-22 ft. lbs.

put top hose back on radiator and tighten clamp

don't forget to vote for me.

thanks

Jul 16, 2011 | 1995 Mercury Sable

1 Answer

How to replace a thermostat on a 1999 Nissan Quest?


1999 Nissan/Datsun Truck Quest Mini Van 3.3L SFI 6cyl

The thermostat is located in the thermostat housing, which is mounted to the coolant crossover tube. The bypass hose is connected to the thermostat water inlet on one end, and to the intake manifold water outlet on the other. The thermostat is not located in the intake manifold water outlet, where the upper radiator hose is connected.

8bcd510.jpg

Fig. Thermostat water inlet sealant application


Hope helps.

Sep 13, 2010 | Nissan Quest Cars & Trucks

2 Answers

2004 thermostat where is it located on engine



2.2L (VIN 4) Engine

  1. Drain the cooling system.
  2. Remove the lower radiator hose from thermostat outlet.

    67ec47f.jpg
    Fig. Remove the thermostat outlet bolts and outlet
  3. Remove the thermostat outlet bolts and outlet.

    77bb8c2.jpg
    Fig. Remove the thermostat



2.2L (VIN F) Engine
  1. Remove the thermostat housing to water pump feed pipe bolts.
  2. Remove the thermostat housing to water pump feed pipe.


46ebede.jpg

Fig. Remove the thermostat


Hope helps (remember rated this),

Jun 25, 2010 | 1996 Chevrolet Cavalier

1 Answer

Where is the thermostat located?


Please don't forget to rate. Thank you.


8eda260.gif
Removing the hose from the thermostat housing


6172e1b.gif
Removal of the water outlet housing


30c4d10.gif
Pull the thermostat out of the water outlet housing



ff0264e.gif

Mar 06, 2010 | 2000 Honda Civic

1 Answer

I just got my water outlet replace now my car is over heating


Hi:
I am not sure why you had your water outlet replaced, but the thermostat is located just below the water outlet. It is possible that it was installed backwards or something odd like that. I would suggest that you remove the water inlet and check things out.

Nov 12, 2009 | 2006 Chrysler 300

1 Answer

How to replace a water pump on a 2003 yukon


Water Pump Replacement (4.8L, 5.3L and 6.0L Engines)
Removal Procedure
1. Drain the cooling system.
2. Loosen the air cleaner outlet duct clamps at these locations:
 Throttle body
 Mass Airflow/Intake Air Temperature (MAF/IAT) sensor
3. Remove the radiator inlet hose clip from the outlet duct.
4. Remove the air cleaner outlet duct.
5. If necessary, remove the engine sight shield.
6. Remove the radiator vent inlet hose from the radiator hose clips.
7. Reposition the inlet hose clamp at the water pump.
8. Remove the inlet hose from the water pump.
9. Remove the fan blade.
11. Reposition the outlet hose clamp at the water pump.
12. Remove the outlet hose from the water pump.
13. Reposition the surge tank outlet hose clamp at the water pump.
14. Remove the surge tank outlet hose from the water pump.
15. Reposition the heater inlet hose clamp at the water pump.
16. Remove the heater inlet hose from the water pump.
17. Remove the water pump bolts.
18. Remove the water pump and gaskets.
19. Discard the water pump gaskets
Installation Procedure Important: All gaskets surfaces are to be free of oil or other foreign material
during assembly.
1. Install the water pump and NEW gaskets
2. Install the water pump bolts.
3. Install the heater inlet hose to the water pump.
Zoom Sized for Print
Notice: Refer to Fastener Notice in Service and Precautions.
2.1. Tighten the bolts a first pass to 15 Nm (11 ft. lbs.).
2.2. Tighten the bolts a final pass to 30 Nm (22 ft. lbs.).
4. Position the heater inlet hose clamp at the water pump.
5. Install the surge tank outlet hose to the water pump.
6. Position the surge tank outlet hose clamp at the water pump.
7. Install the outlet hose to the water pump.
8. Position the outlet hose clamp at the water pump.
9. Install the accessory drive belt.
10. Install the fan blade.
11. Install the inlet hose to the water pump.
12. Position the inlet hose clamp at the water pump.
13. Install the engine vent inlet hose to the radiator hose clips.
14. If necessary, install the engine sight shield.
Important: Align the arrow at the throttle body end of the duct with the throttle
body attaching stud.
15. Install the air cleaner outlet duct
16. Install the radiator inlet hose clip to the outlet duct.
17. Tighten the air cleaner outlet duct clamps at these locations:
 Throttle body
 MAF/IAT sensor Tighten the clamps to 7 Nm (62 inch lbs.).
18. Fill the cooling system.

I hope this helps. The numbering is incorrect in the sequence but the instructions are correct.

Roy

Nov 06, 2009 | 2003 GMC Yukon

2 Answers

2002 grand prix motor 3.8 just want to know where


Exploded view of the thermostat arrangement—3.8L engines

fd5ec32.gif

Oct 31, 2009 | 2002 Pontiac Grand Prix

Not finding what you are looking for?
2000 Buick LeSabre Logo

Related Topics:

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...