Question about 1999 Ford Escort

2 Answers

I just had a "zoom"

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 81 Answers

The pressure plate might not have been torqued down properly....or, if you've really been "standing on it" your clutch disk could have come apart. Disconnect your battery and raise the car. Set it on jack stands (before you even think about getting under it) this is on level concrete, not a dirt hill. Drop your starter (two bolts) take loose your electrical connections, being careful not to break off the terminals. (heat present around starter makes for brittle components) make sure you disconnected battery before putting a wrench on the starter. With the starter out of the way, you now have a nice access hole in which to see inside the area that houses the clutch assembly. You have to remove a dust cover. If anything is amiss inside, your going to see it.....Good luck.....

Theroadisalover

Posted on Jan 01, 2011

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Expert
  • 4,070 Answers

Hi and welcome to FixYa!

I do suspect the flywheel assuming that the mechanics did the clutch right. The flywheel can be worn. May I ask if there's a go when you take off? If there's none then the flywheel is surely affected. If there's a go then the flywheel is good. Try to have the clutch checked for it may be a little loose.

Hope this helps and thank you for using FixYa! Have a good one!

Posted on Jan 01, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Diesel particle filter /system cleaned and put in 2 lts of fluid but light in dash will not go out


sure , read the FSM.
go to Ford, , parts counter and buy the Factory service manual.
on my car 08 , its on CD and is 7000 pages. long.
make sure its covers the Diesel option.
some (many) makers of cars, alternate engine options have
SUPPLEMENTS. ask em'
what country are you in, or where was car sold to.
see the diagnostic pages for your DTC errors and all tests to do.

second gen, Focus engine; line up, WHICH ONE>?

1.4 L I4 Zetec-SE
1.6 L I4 Zetec-SE
1.6 L I4 Zetec-SE Ti-VCT
1.6 L I4 Diesel TDCI
1.6 L I4 Diesel TDCI DPF
1.8 L I4 Duratec HE
1.8 L I4 Diesel TDCI
1.8 L I4 Duratec HE FFV (Flexifuel vehicle)
2.0 L I4 Duratec HE
2.0 L I4 Diesel TDCI
2.5 L I5 Turbocharged T

diagnosing any engine.
step 1 is engine
and step 2 is blown fuses.
and step 3 is read the TSBs on your car. (tech .serv. bul)

Jul 10, 2014 | 2006 Ford Focus

1 Answer

I need a serpentine belt diagram for a 1999 ford escort


SECTION 303-05: Accessory Drive 1999 Escort/Tracer Workshop Manual DESCRIPTION AND OPERATION Procedure revision date: 06/06/1998 Accessory Drive Component Locations -2.0L SPI with A/Ca27194a.gif
Item Part Number Description 1 6B209 Belt tensioner 2 10344 Generator pulley 3 8620 Belt 4 3A733 Power steering pump pulley 5 8678 Belt idler pulley 6 2E884 A/C clutch pulley 7 6316 Crankshaft damper

Component Locations -2.0L SPI without A/Ca27193a.gif
Item Part Number Description 1 6B209 Belt tensioner 2 10344 Generator pulley 3 8620 Belt 4 3A733 Power steering pump pulley 5 6316 Crankshaft damper

Component Locations -2.0L Zetecaq0167a.gif
Item Part Number Description 1 10300 Generator pulley 2 19A216 Belt idler pulley 3 3D673 Power steering pump pulley 4 8509 Water pump pulley 5 6B209 Belt tensioner 6 19703 A/C clutch pulley 7 6B320 Crankshaft pulley damper 8 19A216 Belt idler pulley 9 8620 Drive belt NOTE: Drive belts (8620) with automatic drive belt tensioners (6B209) do not require adjustment.
NOTE: When a new drive belt is installed or a drive belt is re-installed after a service procedure, the drive belt does not fully seat into the pulley grooves until engine has run for several minutes.
This vehicle is equipped with:
  • a V-ribbed serpentine accessory drive belt.
  • an automatic drive belt tensioner.
New drive belts must be of the same type as originally installed.
Check the drive belt condition at 96,000 km (60,000 miles) then after every 24,140 km (15,000 miles).

Mar 06, 2011 | 1999 Ford Escort

1 Answer

R reg, 1.6i zetec escort estate finesse, clutch peddle constantly deppresed, suspect peddle mechanism not clutch!! how can i reset clutch peddle???


You might have a broken cable or the clutch pedal is broken at the top.Unless it a hydraulic clutch and the fluid level is low.

Oct 09, 2010 | 1998 Ford Escort

1 Answer

Has a 99 ezcort will a 94 madza engine work


what model ford escort ?? zetec 1.6 engine ,diesel 1.8 europeon model american model ,anything can be fitted with gas bottles and arc welder to cut and shut then fit to custom

May 01, 2010 | 1999 Ford Escort

1 Answer

Cooling fan relay


its not an actual relay is like a relay assembly

Constant Control Relay Module (CCRM)


The Constant Control Relay Module is located at the LH front of the engine.

May 27, 2009 | 1999 Ford Escort

1 Answer

Engine runs on when driving along


Sounds like the choke is sticking on, that would also explain the heavy fuel consumption

Dec 01, 2008 | 1992 Ford Escort 4 Door

Not finding what you are looking for?
1999 Ford Escort Logo

65 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...