Question about Chrysler Pacifica

Open Question

The cruise control isn't working on my 2007 chrysler Pacifica touring can't figure it out . I checked all the fuses and they are all fine any ideas would be greatly appresiated

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 330 Answers

SOURCE: Cruise control just stopped working

Are you use cruise control a lot?

Posted on Jul 06, 2008

  • 1 Answer

SOURCE: universal garage opener

The solution is in the owners manual.If you want to program the "homelink transmitter" in your car,you will need a remote unit for your garage door opener to do this.It is fairly easy and straightforward.I programmed my 07 Pac and it works great.Good luck!

Posted on Mar 22, 2009

rteemon
  • 578 Answers

SOURCE: 2007 Chrysler Pacifica Touring Edition 4.0L. Trunk

have your deaker check trunk model and motor

Posted on Jul 01, 2009

MNfisherman
  • 11896 Answers

SOURCE: explain fault code #P1004 on 2007 Chrysler 300

P1004 ECU Battery Feed & Power Grounds

Posted on Sep 16, 2009

  • 4 Answers

SOURCE: how do i remove a rear wheel hub assembly on a

if you already removed the bolts that attach it to the spindle then you need a bigger hammer

Posted on Sep 17, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does'nt the Cruise Control Activate 2007 Chrysler Pacifica


Hi Daniel, I'm glad to help! One of the most found problems with cruise control's inoperative here at the dealership is a vacuum problem. If you do not have vacuum from the engine to the cruise control under the hood, then even though the rest of the system is working fine it will not pull the accelerator pedal. NEXT: Another problem could be that the cruise control unit under the hood is not getting power from the brake switch. Check and see if there is power at the unit's connector under the hood. If there is no power then replace the brake switch. NEXT: The PCM may not be getting a signal to apply the cruise and this mainly happens because of a cruise switch problem OR the signal is not getting through the "Clock Spring". This could be either one causing this problem, so replace the switch first because its cheaper. If all of these things check out good then it could be the Cruise Control Unit itself. Hope this helps and have an awesome day Daniel.

Jun 25, 2014 | 2007 Chrysler Pacifica Touring

1 Answer

Why does the Traction Control Indicator stays ON 2007 Chrysler Pacifica


Could be one of your wheel speed sensors is out. The ABS and traction control are linked on most vehicles so when the sensor is bad it will disable the traction control. The best thing to do would be to get it scanned and see what code the computer is throwing.

Jun 25, 2014 | 2007 Chrysler Pacifica Touring

1 Answer

2007 chrysler pacifica touring water pump replacement


Labor time is1.8 hours dealer part is 239.00 not cheap

Nov 28, 2013 | 2007 Chrysler Pacifica Touring

1 Answer

I have a 2005 Chrysler Pacifica (Touring model), with dual-zone AC. The lights on the control unit in dashboard no longer light up. The 'Power' switch does turn the fan on, but I can't change the vent...


Hi Hankry, I suggest taking the vehicle for a diagnostic scan and at the same time get the guys at the shop to test the pressure of the refrigerant. There are pressure sensitive valves installed in the AC system which inhibit operation in the event of gas leakage. Regards John

Oct 13, 2013 | 2005 Chrysler Pacifica

1 Answer

What is the correct sequence in bleeding a 2007 chrysler pacifica with ABS brakes?


Left rear, right front, right rear, left front. The way the Pacifica's brakes lines are plumbed, this is the correct sequence which is against conventional wisdom.

Aug 07, 2012 | 2007 Chrysler Pacifica Touring

1 Answer

2007 chrysler pacifica cruise control not working


2007 Chrysler Pacifica 4 0 engine cruise not working

Jan 07, 2011 | Chrysler Pacifica Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...