Question about Dodge Dakota

Open Question

How to remove a glove box lock cylinder on a 1993 dodge dakota

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 2 Answers

SOURCE: Mitsubishi Galant 2000 Glove Box Lock

First off you will need your key to the lock and a 1/8" flat blade screw driver.  Notice that your lock only turns 1/4 rotation, after doing this procedure you will be able to turn the lock an extra 1/4 turn counter clock-wise (when viewed from the front of the latch).

Turn the lock so it is vertical (perpendicular to the latch itself (counter clock-wise)).  Turn the latch around so you can view the back and the lock is to your left.  Above the lock there is a slot that you can put your screw driver into (not the indention in the metal).  You need to insert your screw driver and listen very closely, you should hear your screw driver hitting the metal latch.  Once you push the latch down with your screw driver, turn the lock another 1/4 turn with your key from the front (counter clock-wise looking from the front).

Once the lock has been turn a full 1/2 turn, you should be able to push the lock out from the back of the latch.

To put the lock in the new latch, you have to have your key in the lock.  Put the lock in the latch with the one pesky keep latch facing the handle used to open the glove compartment.  Once the lock is in the new latch, turn clock-wise until you can't anymore (1/2 turn).

You're done my friend!

Posted on Jan 02, 2009

Ad
  • 1 Answer

SOURCE: glove box, LOCK BROKEN IN LOCK POSITION

If the glove box is anything like mine it is a modular piece assembled with screws.... let them break the handle.. get a replacement first from a junk dealer and have the broken part swapped out. Its like a seat belt catch in my 97 deville. The glove box in mine flopped open and the catch had broken and fell down the door of the glovebox itself. The whole door is assembled with philips screws and should be easily removed and a new latch put in.. whoever does it should not cost more than 50.00 in labor MAYBE unless you have a friend that would do it for a beer. I saw a complete glove box on ebay for 40.00 shipping ontop of that .. i saw the latch for 20.00 +shipping.

Posted on Feb 20, 2009

emissionwiz
  • 76846 Answers

SOURCE: I have a 1993 Dodge Dakota Pickup. No owners

I have the manual, will scan it for page you need, but need to have your email address to send it.

Posted on Jun 14, 2009

  • 75 Answers

SOURCE: Headlights sometimes cut out on a 1993 Dodge Dakota pickup

you may have a bad ground wire up by the head lights the ground spot should be with in a foot of one or the head ligghts

Posted on Aug 27, 2009

  • 29 Answers

SOURCE: 1990 dodge dakota cooling system capacity???

at the max two gal, mix 50/50

Posted on Oct 01, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is the heater resistor on a 2005 dodge dakota? Behind glove box?


should be just above the blower motor. You will need to remove the glove box door to gain access.

Dec 12, 2015 | 2005 Dodge Dakota Club

1 Answer

1993 dodge dakota air in brake lines not getting to wheel cylinder


That is not possible, if you open the bleeder valves
& flush it thru & bleed in proper manner

Have to either bleed or remove & bypass the old rusted
hcu unit on left inside frame rail also.

If you remove it- unplug the module under dash
behind glove box

Jan 23, 2013 | 1993 Dodge Dakota

1 Answer

The blower fan quit working; fuse looks good


the blower should be in the glove box department not really familiar with trucks , it might be that the blower is just dead if so you need to replace it

Dec 26, 2012 | 1993 Dodge Dakota

1 Answer

Where is the blower motror located on a 93 dakota


The blower motor is behind the glove box.
Make sure you check the resistor before taking the motor out.

Dec 19, 2012 | 1993 Dodge Dakota

1 Answer

How do you change the ignition lock cylinder on a 1990 dodge dakota?


I just recently had to replace the ignition lock cylinder on a 1990 Dodge Dakota. If yours is anything like mine the ignition lock cylinder you need is for a 1989 Dodge Dakota. All you have to do to replace it is remove the center of the steering wheel and the steering wheel. Next you will have to remove the lock plate. After you do that you should be able to pull everything else out of the way. Then all you have to do is take a flathead screw driver and pop the old ignition out. You will need a steering wheel puller and a steering wheel lock plate remover. The best thing to do with the lock cylinder is to go to autozone or whatever store you use and match it up. Good luck

Nov 28, 2010 | 1990 Dodge Dakota

2 Answers

Where is the blower motor resister located on on a 2005 dodge dakota V6 slt?


It should be mounted on the blower box,near the blower motor to keep it cool,it mounts on the out side,but actually goes inside the blower box,it has a multi wire connector to it.

May 11, 2010 | 2005 Dodge Dakota

1 Answer

Can i order a key for a 1993 dodge dakota


You can call a dodge dealer, give them the vin# and
they used to be able to cut you a key from that.
But if that method is obsolete, you can try this.
If your key was original equipment, roll the window up
and remove the door panel. Remove the clip from the
linkage rod on the door lock. Remove the spring clip
from the door lock assy. and remove the lock.
The door and ignition lock use the same key. Take
the door lock to a locksmith and they will make a
key for you. Hope this helps.

Feb 05, 2010 | 1993 Dodge Dakota

1 Answer

1993 dodge dakota fuse for headlights where is it


The fuse panel box is to the right of the glove box with the glove box door opened or beneath the instrument panel (dashboard) on 1989-93 models. For 1994-96 Pick-ups, it is beneath the knee blocker panel.

For Headlights check Fuse 20Amp.

Dec 11, 2009 | 1993 Dodge Dakota

1 Answer

2001 dodge dakota how do I relace the cabin fan


the blower motor resistor if i remember correctly is behind the glove box ,once u remove the glove box u should see it . make sure u check the wiring connector, i have ran into a few that has melted ..had to ret a replacement from chrysler that had a bigger supply wire. hope that helped you!!!

Jul 08, 2009 | 1998 Dodge Dakota

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

310 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...