Question about 2005 Chevrolet Suburban

Open Question

The drivers seat in my 2005 Suburban will not lower. It will move forward, backward, tilt and heat up, but it's raised all the way up.

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 8 Answers

SOURCE: I think I have a blown fuse on my 2004 Suburban

At the back of the outer seat adjuster rail is a connector. Sometimes the conn comes apart or wires break or wires get shorted and trip the seat circuit breaker or fuse. This will happen on either side of seat. Also make sure nothing was stashed under the seat to cause wires getting caught & pulled out.

Posted on Dec 26, 2008

Ad
emissionwiz
  • 76846 Answers

SOURCE: 2005 trailblazer driver seat will not move forward or back.

This kind of issus is almost always the power seat switch is defective.

Posted on Feb 19, 2009

  • 206 Answers

SOURCE: electric seat wont move forward or back on 98 chevy blazer

Tap on the motor while pushing the switch. if this does not work take the motor apart and clean the small brushes that contact the motor shaft 2 total they will have a copper wire attached to them good luck

Posted on May 11, 2009

  • 68 Answers

SOURCE: driver's power seat not working properly on 2004 tahoe

it sound like you need to replace seat control switch

Posted on May 14, 2009

  • 2 Answers

SOURCE: 2004 suburban driver 6 way seat will not go up and

there is 2 power seat motors in that seat 1 must have gone out take to repair shop and check voltage of both motors

Posted on May 28, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The seat tilt moves forward but not back. thus I am stuck all the way forward. Is there an override or manual way to tilt the seat back??


All the motors under the seat are bi-directional, meaning you can apply power (12V) on one side and ground on the other, it will turn in one direction. If you reverse the wires it will move in the opposite direction. Quite often the motors fail, but if it at least works in one direction it's usually a wiring issue. Follow the wires from the failed motor to the connector, and jumper them both. The motor should move backwards, and you'll have to find the problem in the wiring. If it doesn't move, lightly tap on the motor with power and ground supplied, if it now moves the motor is starting to fail

Feb 13, 2011 | 2003 Chevrolet Suburban

2 Answers

Push forard on the drivers side electric set and


It isn't wired wrong. Mine does the exact same thing, but it didn't used to be backwards and the wiring has never been changed.

Jun 05, 2010 | 2004 Chevrolet Suburban

1 Answer

Everything works on the power seats except unable to move seats forward and backward


There are usually 3 motors for power seats, 1 to tilt the seat, 1 to raise and lower the seat, and 1 to move the seat back and forth. I would think that motor is bad. Check for any obstuctions to the seat track.

May 06, 2010 | 2005 Chevrolet Trailblazer Ext

1 Answer

Front part of driver seat not raising or lowering


it is probably the motor that works the front only fix is to replace whole seat track.

Feb 11, 2010 | 2004 Chevrolet Suburban

1 Answer

Driver's seat not moving 2006 Navigator


Most seats have more than one motor anymore depending on the features, if it raises/lowers but will not go forward/backward or will only go in one direction (moves forward but not back) its likely you have a faulty motor. If nothing is working check your fuses first then check the switch.

Dec 07, 2009 | 2006 Lincoln Navigator

1 Answer

The back of the seat of my 2003 G35 moves forward but not backwards. All the other buttons work...I'm able to raise/lower, tilt and move the entire seat back and forth. Any suggestions?


this is not uncommon and the test is very simple. The seat motor often fails in this vehicle and the simplest test is this: (1)raise the front of the seat as much as possible, (2)tap on the motor housing while holding the seat slide button (seat motor you need is the one easiest to reach in the front/bottom of the seat). If this resolves your problem what you need is a seat motor. Unfortunately these are often only available with a complete seat base system, so if this is the resolution you may want to search salvage yards, this piece can be easily replaced by itself.

Jul 09, 2009 | 2004 Infiniti G35 Sport Coupe

1 Answer

I just purchased a 2007 jeep liberty sport


I have a 2005 Jeep Liberty and the smae lever that tilts the seat also moves it forward and back. Press forward or back on the switch. Also check for blown fuse or a loose wiring connector under the drivers seat. Good luck, Techjoel

Jun 07, 2009 | 2007 Jeep Liberty Sport

Not finding what you are looking for?
2005 Chevrolet Suburban Logo

Related Topics:

53 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6910 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...