Question about 2001 Honda Accord

1 Answer

Light behind my gas gauge in the instrument panel is out. All the other panel lights work. There doesn't seem to be a specific fuse for the lights in the dash other than the ones that are for the interior.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

  • Expert
  • 92 Answers

Dash lights are on the same circuit. They can be replaced. If you have the instrument cluster out might as well change them all. to remove them just twist 90 degrees.

Posted on Dec 31, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My dials on the dashboard don't light up


Check all the fuses for the instrument panel lighting.

Check all the light bulbs behind the instrument panel.

Replace all burnt fuses and light bulbs.

Oct 09, 2014 | 1996 Mitsubishi Montero

1 Answer

Check engine light doesn't work


check engine light only comes on at first start and when sensors fail.. All lights in cluster run off same fuse

Aug 22, 2012 | 1995 Acura Legend

1 Answer

Fuse for fuel gauge Bentley gt


The fuel gauge is not fused separately from the rest of the gauges in the instrument panel, so unless the whole lot is dead the problem lies elsewhere. It is likely if the gauge doesn't work it will be the gas gauge sending unit in the fuel tank that is defective.

May 04, 2012 | Cars & Trucks

1 Answer

I just replaced fuel pump on my 99 pontiac grand


Anytime when there is multiple issues, I pick one system when the problem is ongoing, check voltage and ground.
The fuses in picture is for instrument cluster, Check for voltage at the fuses when problem is ongoing. Use a test lite. As you can see, one fuse is hot all the time, the other goes hot with the key on.
instrument cluster fuses-sjnyqsqapi3em5cid4nbnzql-2-0.jpg

Apr 08, 2017 | 1997 Pontiac Grand Am

1 Answer

2001 grand caravan no gas gauge heat gauge no odometer rpm lights


check for an instrument cluster fuse in the fuse panel if it's good you will have to pull the cluster out and change the lights behind the gauges

Oct 19, 2009 | 2001 Dodge Grand Caravan

2 Answers

No gauges on instrument panel


Apparently a (some) loose fuse(s). Unplugged, checked the fuse(s) and replugged. All is working fine.
Thank you -

Mar 06, 2009 | 2003 Mercury Mountaineer

1 Answer

Instrument panel


If you take off the cover around the steering colum there should be a wire connected above your blinker switch if its not all the way pushed in tac ,speed and other lights will not work.

Nov 03, 2008 | 1992 Honda Civic

1 Answer

The right side of my instrument panel do not light up. I can not see the gauges for the fuel and temperture, All the gauges are working properly and I checked the fuses and theyn seem okay. So is there...


yes there is light bulbs behind the instrument panel easy job to do your self they just turn come out and put the new bulb in. also you will have to take your dash out it will have to bundels of wires in clips and one black thick wire from the back of it for the speedo that will clip in to

Jul 21, 2008 | 1999 Toyota Celica

1 Answer

Gas gauge no longer works


The light behind myRemove the cluster bezel from the instrument panel. See Cluster Bezel in this group for the procedures.
Remove the four screws that secure the instrument cluster to the instrument panel Instrument Cluster Remove/Install
Pull the instrument cluster rearward to disengage the two self-docking wire harness connectors
NOTE: The instrument cluster has two self-docking wire harness connectors that will be automatically aligned with, and connected to the instrument panel wire harness when the cluster is installed in the instrument panel.
Remove the instrument cluster from the vehicle.
Reverse the removal procedures to install. Tighten the mounting screws to 2.2 N·m (20 in. lbs.)
when I turn my headlights on. All the other gauges are lit, but not the gas gauge. How do I get in there to replace the bulb and fix this? Or is it a fuse problem? I have a 1998 jeep scout Thanks

May 14, 2008 | 2007 Jeep Scout

Not finding what you are looking for?
2001 Honda Accord Logo

134 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...