Question about 1992 Mitsubishi Montero

1 Answer

I dont have brake lights, I checked the fuses and bulbs. The tail light do work.

Posted by on

  • Fernand Luc Bergeron
    Fernand Luc Bergeron Dec 31, 2010

    have you checked the brake light switch located at top of brake pedal for voltage ?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 4 Answers

If all your brake lights are out, it could be your brake light switch. The switch should be located above the brake pedal arm. Might be as simple as a lose or dirty connection. The switch should have a adjustment too.

Posted on Dec 31, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

If the break lights in my 1986 c corvette works but the tail lights do not, what could be the cause


Blown fuse ,bad headlight switch,or wiring issue.
the tail lights have there own fuse and are powered through headlight switch. Do the front running lights come on? If none of them work, switch could be bad if front work and rears dont, check bulbs and power to them when lights are on

Mar 17, 2015 | Cars & Trucks

2 Answers

No drivers side tail lights in 06 dodge sprinter where is the fuse?


If other parking light work in the front or the rear than you don't have a fuse problem.You need to check the wiring to that lamp or you just need a new bulb.

Dec 26, 2009 | 2006 Dodge Sprinter

1 Answer

I don't have any tail lights brake lights, and turn signals. i dont know what fuse or relay to check or replace, because I dont have a owners manual to cross reference. Oh my vehicle is a 1997 ford...


CHECK ALL LIGHT BULBS IN THE BACK. PROBABLY HAVE A FEW BAD BULBS THAT ARE BURNT OUT COMPLETELY. CHECK LICENSE PLATE LIGHTS ALSO. CHECK FUSES TOO TO MAKE SURE THE TAIL LIGHT FUSE IS GOOD.

Jun 10, 2009 | 1997 Ford Expedition

1 Answer

Both 2003 oddyssey brake lights dont work High


clean bulbs socket out using the electronic spray cleaner for electrical connectors.

May 13, 2009 | 2003 Honda Odyssey

2 Answers

Right brake light out; tail light works fine


most rear tail lights and turn/stop lights are the same dual filiment bulb. it is possible for your tail light to work and your brake light not to and still have a bad bulb. I would check the bulb first, your brake light works on the left yes? this would mean that the fuse is fine

Mar 31, 2009 | 2006 Dodge Stratus

2 Answers

Tail lights dont work but bake and turn singals do


did you also check the fuses under the hood, there is a 20 amp out there that feeds that circuit.

Feb 02, 2009 | 2001 Dodge Ram 1500 Truck 2WD

1 Answer

Tail lights dont work


Replace the bulbs.
The bulbs will have two seperate elements in it which is why the brake light works.

Take the bulbs out and you will see the seperate elements.

Jan 08, 2009 | 1995 Subaru Impreza

2 Answers

1991 volvo tail lights


Could you take out a bulb and with a testlight/probe check that you do in fact have power to that circuit .Also check that they are the correct bulb for that application I have seen people put indicator bulbs in where therse supposed to be a double filament bulb.Does the base of the bulbs lead contacts line up with the two steel terminals inside the plug?

Oct 20, 2008 | 1991 Volvo 240

2 Answers

Brake lights dont work


i have a 1999 malabu and my brake lights went out i checked all fuses and changed all the bulbs and i also have no tail lights what could it be.

Jun 06, 2008 | 2005 Chevrolet Malibu

Not finding what you are looking for?
1992 Mitsubishi Montero Logo

121 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...