Question about 2001 Hyundai Santa Fe

1 Answer

Santa Fe Code p1529

My error code is not on your list.

Posted by on

  • 1 more comment 
  • alexbestoloc Oct 21, 2008

    i have santa fe , 2001.
    i haved 3 errors code
    P0720 - changed speed sensor,(250$ in Toronto)
    P0711 - sensor show "transmosion very hot" - changed oil and added small cooler.
    P1529 - not faunded on servis, but in DAEWOO OBDII DTC - P1529 TCU MIL REQUEST SIGNAL, i not fixed :-)

  • juadalat Jan 12, 2009

    I have the same speed sensor problem and would like to replace it myself. But I'm not exactly sure of the location of the speed sensor, does anyone know were I can find some detailed pictures?

  • Anonymous Feb 06, 2009

    is there any way to reset a p1529 code on a hyundai tiburon without going to the dealer, i tried resetting with my scan tol but its still on.?


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has answered 1,000 questions.

  • Master
  • 2,035 Answers

I am sorry the above codes is general error code , the error your getting is car specific hence the codes where not there in the list:

Input speed sensor system

If no output pulse is detected from the input shaft speed (PG-A) sensor for 1 second or more while driving in 3rd or 4th gear at a speed of 30 km/h or more, it is judged to be an open or short circuit . In the input shaft speed sensor and diagnosis code P0715 is output. If diagnosis code P0715 is output four times, the transmission is locked into 3rd gear (D range) or 2nd gear as a fail-safe measure

TCM MIL request signal, this code sets in the computer engine control module when there is a transmission fault code

Posted on Jul 08, 2008

2 Suggested Answers

  • 2035 Answers

SOURCE: Santa Fe Code p1529

Yes they are related once the input sensor fails its activates the signal TCI ML in the computer codes apper .........

Posted on Jul 09, 2008

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer


Code meanning low speed can communication bus not sure what that is

Apr 09, 2015 | 2004 Hyundai Santa Fe

1 Answer

P732, p1529, transfer

code P0732 - gear 2 incorrect ratio possible cause solenoid or related pressure switch is damaged or failed. problem related to the input speed or output speed sensor.low reverse clutch is damaged leaking or failed.faulty valve body. transmission fluid level incorrect or level is too low. code P1529 -

Sep 22, 2013 | 2003 Hyundai Santa Fe

1 Answer

P1529 p0732

code p1529 refers to transmission control module-communication===causes --wiring-TCM and ECM
code p0723 refers to output shaft speed sensor (OSS)-circuit intermittent==causes--wiring--poor connection--OSS sensor --ECM /TCM
n both codes the TCM shows and the wiring may be a loose /dirty connection at the gear box level

Aug 31, 2013 | 2003 Hyundai Santa Fe

1 Answer

P01529 trouble code

Per Chilton's Manual:
P1529 refers to the TCM (Transmission Control Module)

Trouble Code Conditions:
Engine started, engine running, and the PCM did not receive the Customer Request Snapshot Data (MIL and Freeze Frame Data) as requested from the Transmission Control Module (TCM).

Possible Causes:

  • Transmission control module error
  • Check for trouble codes in the transmission control module
It may merely be an isolated incident whereby having the code cleared (some auto parts stores will do a free obdII test and clear most codes) will solve the problem. Otherwise, you may have a bad speed sensor that is throwing the code.

Sep 08, 2011 | 2001 Hyundai Santa Fe

1 Answer

What do these codes mean needs to be fixed. P1529 and P1723. Thank you

The TCM can request activation of the MIL lamp Via a communication line to the ECM. This is only a request from TCM to ECM to turn the MIL on. The fault code is stored in the TCM. Select Transaxle system on the Scantool and monitor DTC related automatic transaxle system.
DO ALL REPAIRS associated malfunction with A/T.
Is that all?

Feb 19, 2011 | 2003 Hyundai Santa Fe

1 Answer

Trouble code p1529 in a 2001 hyundai santafe

Emission System - Purge Ctrl. Valve ... P1529

Jun 13, 2010 | 2001 Hyundai Santa Fe

3 Answers

Code P0501 vehicle speed sensor A range/

I found an answer to this in the reverse direction. While changing my front brakes, I noticed that the sprocket pickup for the speed sensor on the front passenger side half shaft that works with the sensor was cracked and ready to fall off. I removed it so that it wouldn't fly off and puncture a tire. I do NOT have Anti Lock Brakes on my 2001 Santa Fe. I started up the car wondering what to expect and experienced a P0501, P1529, P0500 and a second P0501. Looks like it time for a new half shaft (Axle).

Aug 20, 2009 | 2004 Hyundai Santa Fe

1 Answer

Santa Fe Code p1529

Yes they are related once the input sensor fails its activates the signal TCI ML in the computer codes apper .........

Jul 08, 2008 | 2001 Hyundai Santa Fe

Not finding what you are looking for?
2001 Hyundai Santa Fe Logo

2,083 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts


Level 3 Expert

71338 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22059 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7018 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides