Question about 1995 Mercury Villager

1 Answer

1998 Mercury Villager. Rear heater {blower) will not work. Checked fuses, changed rear control panel, Changed front control panel, Changed both front and rear Resistor. Checked power to the rear blower motor wiring is good. Still no blower heat and no control in the rear. The front works just fine with plenty of heat.I know i'm missing something but what could it be? Where is this Water control valve that everyone is talking about? Could this be a problem or is it still an electrical problem? I am at my wits end in trying to figure this out. I have checked almost everything that i could think of. Help solving this problem would really make the wife happy.

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Mercury Master
  • 4,369 Answers


you need to solder 4 pins in control head in front.

go here for pics and process. I fix for $25 plus postage

Posted on Jan 07, 2011


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have power rear vents on my 98 Villager that does not operate. I cannot locate it on the fuse box to replace so i checked each fuse and none were blown. Where is it?

go to our site for help.

your owner manual has fuse diagrams.

the qtr windows go through the power window relay. If other windows work, not likely the relay or timer module.

you need 12 volts at this wire on the overhead console switches.

  • Measure the voltage between the power rear quarter glass window regulator control switch C903 , "O/BK" and ground.

  • If no 12 v, SERVICE the "O/BK" wire between the power window relay and the power rear quarter glass window regulator control switch.
    The ower window relay is above and behind the fuse panel on the dash. 2 relays and turn signal flasher in same area. Turn signal light on to locate flasher. 2 bolts hold bracket with relays & flasher.


    Jun 05, 2011 | 1998 Mercury Villager

    1 Answer

    We have a 1997 Mercury villager, there is a heater in the second seat section on the drivers side under the window it has quit working after opening the panel we found a couple of things that could be...

    go to our site and read the files before doing any work.

    The rear blower wil work after you solder the circuit board in the front control head. We have pictures and directions. If you can't do it, I fix them for 25 plus your old part.

    Go here and join the group.

    Feb 28, 2011 | 1997 Mercury Villager

    1 Answer

    The rear heater (blower) won't operate. Changed both front and rear control panels and both F and R Resistors. And of course checked all the fuses under the dash And under the hood, All seem to be good ....

    You need to solder the 4 pins on the circuit board on the main heater control head. I have pictures and procedures posted here. I fix for $25 plus postage if you can't do it. But it is easy. Just put a small dab on each pin If you look with magnifying glass, you will see a tiny crack all the way around at least one pin.


    Dec 31, 2010 | 1995 Mercury Villager

    1 Answer

    Replaced rear air conditioner/ heater control and it still does not work.

    it's the front controls. Need soldering. go here and read procedure. If you can' t do it, I will repair yours for $25 & exchange.

    let me know


    Aug 29, 2010 | 1998 Mercury Villager

    1 Answer

    Rear air does not work. The blower does not blow.

    it's a solder job needed for the front controller. I fix them all the time for people. $25. or do it yourself at our site I have directions.

    Aug 20, 2010 | 1998 Mercury Villager

    1 Answer

    1999 Villager: My 1999 mercury villager ac works in the front but...

    you could just be low on freon. Add 1 can & see what happens.
    Usually the rear works but not the front. I'm assuming the blower works back there.

    It could also be the rear control for hot/cold. You can get an assembly at slavage yard for $10.

    i have an extra if you find that is the failure.

    go here and our team will help for free.

    May 18, 2010 | 1999 Mercury Villager

    2 Answers

    My rear ac on my mercury villager is not woring the ligth on it are on just it is not blowing , i replace the blower and resistor and all fuses are ok still not working , help please

    yes hi you guys was right about the resistor needed to be clean with some alcohol and it work out reaaly good and the blower stort blowing , full ac/ haet all are working thanks fixya

    Jun 05, 2009 | 1997 Mercury Villager

    1 Answer

    Hi i have mercury villager 97 rear ac/heater is not blowing

    go here and we will diagnose with you. read files too.

    need to know if manual a/c or electronic a/c system. could be fuse or blower motor resister. Front or rear /ac blower?

    Jun 03, 2009 | 1994 Cadillac DeVille

    1 Answer

    Rear Air & Heat does not work on '97 Mercury Villager.

    It's probably the cracked solder joint on the control assembly in the frony. I fix them all the time and sell them for $30 plus shipping. I always keep a spare repaired in my garage. villagers & Quests are noted for this. Don't know why you don't have lights on rear panel. I keep a spare one of those too, but it should have no affect on heater performance. Let me know if you are interested. You have to send yours back to me though.

    If you are a techie, I will refer you to our Villager forum where there are files and photos on everthing about Villager & Quest issues.

    see the circleed area where the bad solder joint is on the backside of the control head.


    Mar 06, 2009 | 1997 Mercury Villager

    Not finding what you are looking for?
    1995 Mercury Villager Logo

    478 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Mercury Experts


    Level 3 Expert

    79123 Answers


    Level 3 Expert

    5677 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22326 Answers

    Are you a Mercury Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides