Question about 1997 Honda Accord

1 Answer

Need to know how to install the key in the harmonic balancer.

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Honda Master
  • 22,219 Answers

The key is in the crankshaft surely

Posted on Dec 31, 2010

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: BAD HARMONIC BALANCER

To remove the harmonic balancer on my 1992 Pathfinder, I needed to loosen the alternator and power steering belts, remove the cooling fan (4 10 mm nuts), remove the radiator (2 10 mm  bolts hold it to the frame, remove top and bottom hose [The drain **** is covered by what appears to be a coolant line], as well as the overflow tube to the reservoir. With a 3/4" impact gun and a 27 mm socket, remove the bolt that retains the alt, ps shieves and the harmonic balancer to the crankshaft. With a large 3 jaw puller, remove the harmonic balancer with the pully sheives as an assembly. I do not recommend attempting the removal without the puller.
To  put it back on, you will need a large torque wrench for the crankbolt and a small torque wrench for with a crowsfoot for the fan nuts.

Posted on Dec 01, 2008

  • 5 Answers

SOURCE: Mitsubishi Diamante 1995 (2.5L) harmonic balancer...

you def will not be able to drive the vehicle with no balancer due to the fact that is the main source that runs all your belts...all you should need is a harmonic balancer pulley remover..

Posted on Dec 09, 2008

  • 1 Answer

SOURCE: 1993 Geo Prizm Lsi Harmonic Balancer

Yes a harmanic balancer from tha corolla is the same thing. I had to do the same thing with my 95 geo. It works out to be a lot cheaper buying for a toyota than a geo.

Posted on Mar 23, 2009

  • 83 Answers

SOURCE: How To Remove the harmonic balancer on a 2001 ram

Here is a link to a 2001 Dodge Ram Factory Service Manual with diagrams and step by step procedures.

Posted on Sep 27, 2009

  • 1244 Answers

SOURCE: I need to replace my timing belt but when I tried

yes!! you need to pull the harmonic balancer !! and the center nut i do believe...is a 22 mm and yes you will need a puller

Posted on Jan 15, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need to replace harmonic balancer in 99 crv is there anything else I should replace at the same time?


If you're changing the balance, you may want to install new drive belts since the belts have to be removed to do the replacement of the balance. Also, check the key way to make sure it is not worn irregularly on the crankshaft.

Feb 16, 2015 | Cars & Trucks

1 Answer

I puy a crankshaft sensor on my 04 grand prix n i need to know how the marks line back up


The harmonic balancer has a grove where a square key which is already on the crankshaft holding the timing gear. Now all you have to do is look at your balancer you will see the grove cut out ok. As you put it in all you have to do it align the grove with the crankshaft key you should be able to see it before you install it. Once aligned just tap it in with a sledge and a piece of wood in the center so you do not do damage to the harmonic. I use a brass hammer. Now if the key came out with the balancer the slide key in first tapping it nicely and do not do any damage to it or the crank because it will be hard to slide the harmonic back on ok. Let me know good luck.
See the square grove on the harmonic in the center.
25362748-5oj0shduqnd3nognpvizeq0h-3-0.jpg

Jan 10, 2015 | 2004 Pontiac Grand Prix

1 Answer

I need the location of the harmonic balancer on my 2.2l Ecotec engine. Car is 2004 Chevrolet Cavalier LS.


CRANKSHAFT PULLEY IS THE HARMONIC BALANCER.YOU NEED THESE TOOLS TO REMOVE HARMONIC BALANCER, YOU NEED HARMONIC BALANCER REMOVER AND INSTALLER TOOL.YOU NEED A LARGE PIN SPANNER WRENCH TO HOLD HARMONIC BALANCER IN PLACE WHILE LOOSEN THE HARMONIC BALANCER BOLT.

May 21, 2011 | Chevrolet Cavalier Cars & Trucks

1 Answer

1999 Ford Taurus. Can see crankshaft spinning fine coming out of block. Nut on end holding harmonic balanced spinning fine too. Harmonic balancer doesn't spin. How to fix? Do I need to pull the engine to...


There is a key way in the crankshaft and the balancer with a woodruff key that keeps it locked in place. The woodruff key resembles a half moon shape. You will have to remove the balancer to see what kind of damage there is and go from there.

Jan 02, 2011 | Ford Taurus Cars & Trucks

2 Answers

How do i aline a 1993's oldsmobile cutlass ciera harmonic balancer?


Do you mean for timing purposes? If not that should have a key way. If not equipped with a key way no alignment is needed

Jun 27, 2010 | 1993 Oldsmobile Cutlass Ciera

1 Answer

REMOVING HARMONIC BALANCER


to remove the balancer you will need to remove the belt, the remove the bolt off the balancer then use a puller to remove the balancer,to install line up the key way slide balancer back on and then tight bolt,

May 13, 2010 | 1992 Buick Century

1 Answer

How do you replace the harmonic balancer pulley on the 2000 oldsmobile intrigue


The short answer to your question is:

1. Raise the car on the passenger side and remove the front wheel.
2. Remove the belts on the harmonic balancer.
3. Remove the retaining bolt.
4. With a puller, jack the harmonic balancer off of the crank shaft. You can rent a puller at your local auto parts store. It is easiest to access the harmonic balancer through the fender, hence the need to remove the wheel.
5. You should also consider replacing the seal around the harmonic balancer to minimize the possibility of a leak later.
6. Install the new harmonic balancer and tighten the retaining bolt to the specified torque (I don't know this off the top of my head).
7. Replace the belts and wheel, and voila...mission accomplished.

This was a short answer to your question. You may wish to consult a repair manual for illustrations, torque specifications, additional instructions, etc. This job is not for the faint of heart. Good luck!

Feb 19, 2010 | 2000 Oldsmobile Intrigue

2 Answers

How to remove the harmonic balancer pulley on a '96 dodge caravan 3/0L?


i have a 1998 caravan my harmonic balancer fell off my qquestion is is there 2 separate keys that hold on the timing gear and the balancer pulley on, i have been to the dodge dealer and they printed me out pics but i still don't know for sure if the timing gear has it's own key or there is just 1 long key that holds both the timing gear and the balancer ......PLEASE HELP

Nov 22, 2009 | 1996 Dodge Caravan

2 Answers

Harmonic balancer


what are the steps to removing a harmonic balancers

Oct 18, 2008 | 1997 Chevrolet Corvette

Not finding what you are looking for?
1997 Honda Accord Logo

Related Topics:

79 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...