Question about 1996 GMC Sierra

1 Answer

How to remove blower motor - 1996 GMC Sierra

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 375 Answers

  • Disconnect the negative battery cable.
  • Disconnect the blower motor lead connector from the wiring harness connector.
  • Remove the blower motor cooling tube from the blower motor.
  • Remove the four retaining screws.
  • Turn the motor and the wheel assembly slightly to the right so that the bottom edge of the mounting plate follows the contour of the wheel well splash panel.
  • Lift up on the blower and remove it from the blower housing.
  • Installation the new blower motor by reversing the removal steps.
  • Connect the negative battery cable.
  • Posted on Jan 11, 2011

    Ad

    1 Suggested Answer

    6ya6ya
    • 2 Answers

    SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

    Hi,
    a 6ya expert can help you resolve that issue over the phone in a minute or two.
    Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
    the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
    click here to download the app (for users in the US for now) and get all the help you need.
    Goodluck!

    Posted on Jan 02, 2017

    Ad

    Add Your Answer

    Uploading: 0%

    my-video-file.mp4

    Complete. Click "Add" to insert your video. Add

    ×

    Loading...
    Loading...

    Related Questions:

    1 Answer

    How to change ac blower on a 2001 chevy silverado with the 5.3 liter v8


    With Delphi Blower Motor
    1. If equipped, remove the sound insulator panel.
    2. Remove the blower motor insulating cover screws.
    3. Disconnect the electrical connector from the blower motor.
    4. Remove the blower motor insulating cover.
    5. Pull the retaining tab down while turning the blower motor counterclockwise in order to disengage the blower motor from the heater/ventilation module.
    6. Remove the blower motor.

    With Visteon Blower Motor
    1. Remove the sound insulator panel.
    2. Disconnect the electrical connector from the blower motor.
    3. Remove the screws from the blower motor.
    4. Remove the blower motor from the HVAC module.
    5. Remove the retainer from the blower motor wheel. Discard the retainer.
    6. Remove the blower motor wheel from the blower motor.

    Jul 27, 2014 | 2001 Chevrolet Silverado

    1 Answer

    The heater blower stopped working and the fuse is not blown?


    Blower Motor Removal & Installation W/O Air Conditioning Blower Motor (W/O Air Conditioning) gm-10-00-634.gif

    To Remove:
    1. Remove the PCM.
    2. Remove the coolant reservoir.
    3. Remove the rear coolant recovery reservoir mounting stud.
    4. Disconnect the cooling tube from the blower motor.
    5. Disconnect the electrical connector from the blower motor.
    6. Remove the blower motor mounting bolts.
    7. Remove the blower motor insulating cover.
    8. Remove the blower motor.
    To Install:
    1. Install the blower motor.
    2. Install the blower motor mounting bolts.
    3. Connect the electrical connector to the blower motor.
    4. Connect the cooling tube to the blower motor.
    5. Install the rear coolant recovery reservoir mounting stud.
    6. Install the coolant reservoir.
    7. Install the PCM.
    W/ Air Conditioning Blower Motor (W/ Air Conditioning) gm-10-00-633.gif

    To Remove:
    1. Remove the PCM.
    2. Remove the coolant reservoir.
    3. Remove the rear coolant recovery reservoir mounting stud.
    4. Disconnect the electrical connector from the blower motor.
    5. Move the PCM connectors out of the way.
    6. Remove the blower motor access cover screws. CAUTION
      Do not cut any deeper than necessary in order to remove the access cover.
    7. Cut through the access cover on the cut line using a sharp utility knife.
    8. Disconnect the cooling tube from the blower motor.
    9. Remove the blower motor mounting bolts.
    10. Remove the blower motor.
    To Install:
    1. Install the blower motor.
    2. Install the blower motor mounting bolts.
    3. Connect the cooling tube to the blower motor.
    4. Install the blower motor access cover.
    5. Install the blower motor access cover retaining screws.
    6. Using black weather-strip adhesive, seal the cut line.
    7. Connect the blower motor electrical connector.
    8. Reposition the PCM connectors.
    9. Install the rear coolant recovery reservoir mounting stud.
    10. Install the coolant reservoir.
    11. Install the PCM.
    prev.gif next.gif

    Feb 08, 2011 | 1996 Chevrolet Blazer

    1 Answer

    How to replace main heater fan


    Blower Motor REMOVAL & INSTALLATION Front Fig. 1: Front heater blower motor assembly 89696g02.gif
    Remove the glove box to access the front blower motor, which is on the firewall 89696p02.jpg
    The blower motor is retained by four bolts (arrows) 89696p03.jpg
    The blower motor vent tube helps to cool the blower motor for efficient operation 89696p04.jpg
    Push up on the clip to remove the blower motor connector 89696p05.jpg
    A ratchet with extensions makes removal of the retaining screws easier 89696p06.jpg
    Lift the blower motor over the control cable . . . 89696p07.jpg
    . . . and remove it from the vehicle 89696p08.jpg
    1. Disconnect the negative battery cable.
    2. Open the glove box door. Gently squeeze the retainers at the rear of the box inward and allow the box to swing downward. NOTE: If additional access is required, unfasten the glove box hinge retainers and remove the assembly.
    3. Label and disconnect the electrical harness from the blower motor.
    4. Remove the blower motor housing tube and/or blower motor cover.
    5. Remove the blower motor retaining screws.
    6. Remove the blower motor from the A/C evaporator. To install:
    7. Install the blower motor in the A/C evaporator and tighten the retaining screws securely.
    8. Install the blower motor housing tube and/or blower motor cover.
    9. Connect the electrical harness to the blower motor.
    10. Reinstall the glove box and close its door.
    11. Connect the negative battery cable.
    Rear Fig. 2: Service cover push pin locations 89696g03.gif
    1. Disconnect the negative battery cable.
    2. Remove both rear passenger seats.
    3. Remove the three push pin retainers from the lower edge of the auxiliary heater and air conditioning service cover.
    4. Lift the service cover outward and upward to remove.
    5. Label and disconnect the electrical harness.
    6. Remove the blower motor housing tube.
    7. Loosen the three retaining screws and remove the blower motor. To install:
    8. Install the blower motor and tighten retaining screws securely.
    9. Install the blower motor housing tube.
    10. Connect the electrical harness.
    11. Position the service cover and install the three push pin retainers from the lower edge of the cover.
    12. Install both rear passenger seats.
    13. Connect the negative battery cable.
    prev.gif next.gif

    Dec 19, 2010 | 1998 Ford Windstar

    1 Answer

    How to change blowermotor on 2001 gmc jimmy


    Blower Motor Removal & Installation W/O Air Conditioning Blower Motor (W/O Air Conditioning) gm-10-00-634.gif

    To Remove:
    1. Remove the PCM.
    2. Remove the coolant reservoir.
    3. Remove the rear coolant recovery reservoir mounting stud.
    4. Disconnect the cooling tube from the blower motor.
    5. Disconnect the electrical connector from the blower motor.
    6. Remove the blower motor mounting bolts.
    7. Remove the blower motor insulating cover.
    8. Remove the blower motor.
    To Install:
    1. Install the blower motor.
    2. Install the blower motor mounting bolts.
    3. Connect the electrical connector to the blower motor.
    4. Connect the cooling tube to the blower motor.
    5. Install the rear coolant recovery reservoir mounting stud.
    6. Install the coolant reservoir.
    7. Install the PCM.
    W/ Air Conditioning Blower Motor (W/ Air Conditioning) gm-10-00-633.gif

    To Remove:
    1. Remove the PCM.
    2. Remove the coolant reservoir.
    3. Remove the rear coolant recovery reservoir mounting stud.
    4. Disconnect the electrical connector from the blower motor.
    5. Move the PCM connectors out of the way.
    6. Remove the blower motor access cover screws. CAUTION
      Do not cut any deeper than necessary in order to remove the access cover.
    7. Cut through the access cover on the cut line using a sharp utility knife.
    8. Disconnect the cooling tube from the blower motor.
    9. Remove the blower motor mounting bolts.
    10. Remove the blower motor.
    To Install:
    1. Install the blower motor.
    2. Install the blower motor mounting bolts.
    3. Connect the cooling tube to the blower motor.
    4. Install the blower motor access cover.
    5. Install the blower motor access cover retaining screws.
    6. Using black weather-strip adhesive, seal the cut line.
    7. Connect the blower motor electrical connector.
    8. Reposition the PCM connectors.
    9. Install the rear coolant recovery reservoir mounting stud.
    10. Install the coolant reservoir.
    11. Install the PCM.
    prev.gif next.gif

    Dec 08, 2010 | 2001 GMC Jimmy

    1 Answer

    How do you change a heater blower moter in a 1998 Dodge grand caravan


    Removal & Installation


    afab437.gif

    The blower motor is located behind the glovebox, behind the blower motor cover

    1. Disconnect and isolate the negative battery cable, then wait 2 minutes before proceeding with the removal. This will effectively disable the air bag system preventing possible personal injury.
    2. Remove the glove box from the instrument panel.
    3. Remove the A/C-heater blower motor cover.
    4. Disconnect the blower motor wiring connector.
    5. Remove the blower motor wiring grommet and feed the wiring through the blower motor housing.
    6. Remove the blower motor mounting screws.

    b4976b0.gif
    Once the cover is removed, unplug the electrical connector and push it through the opening in the housing


    31d76b2.gif
    The blower motor is secured to the housing with three small screws

    1. Allow the blower motor assembly to drop downward to clear the instrument panel and remove from vehicle.
    To install:
    1. Place the blower motor assembly into position on the A/C-heater unit and tighten the mounting screws.
    2. Route the blower motor wiring through the blower motor housing and seat the wiring grommet in the hole of the blower motor housing.
    3. Reconnect the blower motor electrical connector.
    4. Install the A/C-heater blower motor cover.
    5. Install the glove box into the instrument panel.
    6. Reconnect the negative battery cable. Check blower motor operation.

    May 24, 2010 | 1998 Dodge Caravan

    1 Answer

    How to install a front blower motor in a 96 ford explorer


    Blower Motor - REMOVAL & INSTALLATION
    (see Figures 1 and 2)

    8e5714d.jpg

    Fig. 1: Exploded view of the blower motor mounting

    ff3bdf8.jpg

    Fig. 2: Exploded view of the blower motor and wheel (fan) assembly

    Without Air Conditioning

    1. Disconnect the negative battery cable.
    2. Remove the air cleaner or air inlet duct, as necessary.
    3. If necessary, Remove the speed control module and the washer fluid reservoir.

    2587a00.jpg

    Fig. 3: To remove the blower motor, first disconnect the electrical wire harness plug...

    f234e79.jpg

    Fig. 4: ...then remove the blower motor cooling tube from the motor
    1. Disconnect the wire harness connector from the blower motor by pushing down on the connector tabs and pulling the connector off of the motor.
    2. Disconnect the blower motor cooling tube at the blower motor.
    3bbd0e1.jpg

    Fig. 5: Remove the blower motor attaching screws and the washer fluid reservoir...

    8da3ac1.jpg

    Fig. 6: ...then slide the blower motor from the housing. Take care to not damage the blower wheel (arrow)
    1. Remove the 2 screws attaching the blower motor and wheel to the heater blower assembly.
    2. Holding the cooling tube aside, pull the blower motor and wheel from the heater blower assembly and remove it from the vehicle.
    3. Remove the blower wheel push-nut and/or clamp from the motor shaft and pull the blower wheel from the motor shaft.
    To install:
    1. Install the blower wheel on the blower motor shaft.
    2. Install the hub clamp and/or push-nut.
    3. Holding the cooling tube aside, position the blower motor and wheel on the heater blower assembly and install the 2 attaching screws.
    4. Connect the blower motor cooling tube and the wire harness connector.
    5. Install the vacuum reservoir on the hoses with the 1 screws.
    6. If removed, install the speed control module and the washer fluid reservoir.
    7. Install the air cleaner or air inlet duct, as necessary.
    8. Connect the negative battery cable and check the system for proper operation.

    With Air Conditioning
    1. Disconnect the negative battery cable.
    2. In the engine compartment, disconnect the wire harness from the motor by pushing down on the tab while pulling the connection off at the motor.
    3. Remove the air cleaner or air inlet duct, as necessary.
    4. If necessary, remove the solenoid box cover retaining bolts and the solenoid box cover.
    5. Disconnect the blower motor cooling tube from the blower motor.
    6. Remove the blower motor mounting plate attaching screws and remove the motor and wheel assembly from the evaporator assembly blower motor housing.
    7. Remove the blower motor hub clamp from the motor shaft and pull the blower wheel from the shaft.
    To install:
    1. Install the blower motor wheel on the blower motor shaft and install a new hub clamp.
    2. Install a new motor mounting seal on the blower housing before installing the blower motor.
    3. Position the blower motor and wheel assembly in the blower housing and install the attaching screws.
    4. Connect the blower motor cooling tube.
    5. Connect the electrical wire harness hard shell connector to the blower motor by pushing into place.
    6. If removed, position the solenoid box cover into place and install the 2 retaining screws.
    7. Install the air cleaner or air inlet duct, as necessary.
    8. Connect the negative battery cable and check the blower motor in all speeds for proper operation.

    Hope this help (remember comment and rated this).

    Apr 23, 2010 | 1996 Ford Explorer

    1 Answer

    How to remove a heater blower motor on a 2004 Dodge Caravan.


    Please don"t forget to rate:

    Removal & Installation
    CAUTION The Supplemental Inflatable Restraint (SIR) system must be disarmed before removing the blower motor assembly. Failure to do so may cause accidental deployment of the air bag, resulting in unnecessary SIR system repairs and/or personal injury.


    1. Disconnect and isolate the negative battery cable, then wait 2 minutes before proceeding with the removal. This will effectively disable the air bag system preventing possible personal injury.
    2. Remove the glove box from the instrument panel.
    a58c6c0.gif
    The blower motor is located behind the glovebox, behind the blower motor cover

    1. Remove the A/C-heater blower motor cover.
    2. Disconnect the blower motor wiring connector.
    3. Remove the blower motor wiring grommet and feed the wiring through the blower motor housing.
    4. Remove the blower motor mounting screws.
    99bec31.gif
    Once the cover is removed, unplug the electrical connector and push it through the opening in the housing

    20bb980.gif
    The blower motor is secured to the housing with three small screws

    1. Allow the blower motor assembly to drop downward to clear the instrument panel and remove from vehicle.
    To install:
    1. Place the blower motor assembly into position on the A/C-heater unit and tighten the mounting screws.
    2. Route the blower motor wiring through the blower motor housing and seat the wiring grommet in the hole of the blower motor housing.
    3. Reconnect the blower motor electrical connector.
    4. Install the A/C-heater blower motor cover.
    5. Install the glove box into the instrument panel.
    6. Reconnect the negative battery cable. Check blower motor operation.

    Jan 04, 2010 | 2004 Chrysler Voyager

    1 Answer

    How to replace the blower motor fan assembly in a 2000 GMC Yukon XL K1500 4X4


    Blower Motor Removal & Installation Delphi
    Blower Motor Replacement (Delphi)

    1fb4643.gif
    To Remove:
    1. Remove the instrument panel sound insulator panel (if equipped).
    2. Disconnect the electrical connector from the blower motor.
    3. Remove the blower motor insulating cover screws.
    4. Remove the blower motor insulating cover.
    5. Pull the retaining tab down and rotate blower motor counterclockwise to remove.
    To Install:

    1. Position the blower motor and turn assembly clockwise until tab locks in place.
    2. Install the blower motor insulating cover.
    3. Connect the electrical connector to the blower motor.
    4. Install the instrument panel sound insulator panel (if equipped).

    Visteon

    Blower Motor Replacement (Visteon)

    878e8d8.gif
    To Remove:
    1. Remove the instrument panel sound insulator panel (if equipped).
    2. Disconnect the electrical connector from the blower motor.
    3. Remove the blower motor screws.
    4. Remove the blower motor from the HVAC module.
    To Install:
    1. Position the blower motor and install mounting screws.
    2. Connect the electrical connector to the blower motor.
    3. Install the instrument panel sound insulator panel (if equipped).

    Oct 02, 2009 | 2000 GMC Yukon XL

    Not finding what you are looking for?
    1996 GMC Sierra Logo

    275 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top GMC Experts

    yadayada
    yadayada

    Level 3 Expert

    76846 Answers

    Freddy

    Level 3 Expert

    1311 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22246 Answers

    Are you a GMC Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...