Question about 2001 Chrysler Town & Country

2 Answers

Heater/AC blower motor will not blow - 2001 Chrysler Town & Country

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Show me photo of what the resister looks like. One under the hood

Posted on Apr 06, 2013

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 46 Answers

Check fuses

Posted on Dec 31, 2010

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 958 Answers

SOURCE: Blower for AC/Heater stopped working

if you can reach the blower motor, it could be a worn out carbon brush of the blower motor. if they are, buy a set of carbon brush, learn how to replace them and it would be back running in no time. by the way, when you pull out the carbon brush holder, make sure you dont interchange the position. you can put them back wards and what would happen is the rotation will be reversed. either you reversed the carbon brush holder or just simply interchange the wires that are coming to the motor. i hope i was able to help...

Posted on Jul 07, 2008

Brian032472
  • 150 Answers

SOURCE: blower not working on ac or heater etc.

A very common solution here is replacement of the blower motor resistor. The resistor when they break do one of two things.

A. work only on high

B. dont work.

This item is located on passanger side under dash and is usually held in with two small bolts on either side with an electrical connector seperating the mounting screws. It is mounted right in the air box. I replace at least one of these a week in my shop very common item.

Posted on Nov 04, 2008

  • 7 Answers

SOURCE: AC blower motor switch inop

You may have a vacuum line disconnected. check your engine and listen for the hissing of the vacuum line.

Posted on May 29, 2009

  • 69 Answers

SOURCE: 2003 Chevy AC Fan Blower Motor troubleshooting

first check the fuse or relay.. this will be the cheapest sollution and easiest to check.

Posted on Jul 31, 2009

  • 2 Answers

SOURCE: heater blower motor only works on high

You most likely need to replace the ignition switch. Sounds weird, but check out other posts. It works.

Posted on Aug 27, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 Chrysler pacifica AC/HEATER continuously blows with power button in off position


sounds like a blower motor resistor or bad relay. Blower motor resistor is so you don't burn up the blower motor.

Aug 05, 2016 | Cars & Trucks

1 Answer

AC Heater


It sound like the blower wheel of the blower motor is rubbing the inside of the housing (the smoke). Sounds like the blower wheel rubbing may have burned the inner plastic housing or has come off of the motor shaft inside. Take the blower motor and wheel back out and inspect everything closely I think you will find the problem.

Apr 13, 2014 | 2004 Ford F-250 Super Duty

1 Answer

Heater and ac not blowing at all


The first thing i would check is the heater blower motor for power.If the blower motor has power then pull and wiggle on the blower motor resistors pigtail or connector but make sure the heater and fan motor and the ignition switch are turn on so you can here if the motor comes on. A lot of times these blower motor resistors get hot enough to melt the connector causing it to loose its connection.

Oct 26, 2012 | 2001 Chevrolet Silverado 2500HD

1 Answer

Heater doesnt work


To troubleshoot this types of problem,click the link below :---
Car heater blowing warm, but not hot air?http://schematicsdiagram.blogspot.com/2011/12/car-heater-blowing-warm-but-not-hot-air.html

--------
Engine Overheats and heater blowing cold?

http://howtobyme.blogspot.com/2011/11/engine-overheats-and-heater-blowing.html

---------
Heat blows cold on drivers side and hot on passenger side?

http://schematicsdiagram.blogspot.com/2011/12/heat-blows-cold-on-drivers-side-and-hot.html

-----------
No heat on car? http://technoanswers.blogspot.in/2012/02/no-heat-on-oldsmobile-silhouette.html

------------
Heater blows intermittently and temp gauge goes erratic?

http://technoanswers.blogspot.com/2012/01/heater-blows-intermittently-and-temp.html

------------
Heater blows cold?

http://schematicsdiagram.blogspot.in/2012/02/heater-blows-cold.html

---------
Heater/AC blower motor not working?

http://technoanswers.blogspot.in/2012/02/heaterac-blower-motor-not-working-on.html

------------
A/C, heater, defroster fan, not working? http://technoanswers.blogspot.in/2012/02/ac-heater-defroster-fan-not-working.html Heater problem?

http://technoanswers.blogspot.in/2012/02/heater-problem-on-isuzu-trooper.html

---------

This will help.Thanks.

Mar 27, 2012 | 1994 Volvo 960

1 Answer

1992 323 mazda want blow heat out


REPLACE THERMOSTAT.IF ALREADY DONE.CHECK HEATER BLOWER MOTOR SEE IF POWER GOING TO HEATER BLOWER MOTOR.IF YES BLOWER MOTOR BAD.IF NO POWER GOING TO BLOWER MOTOR CHECK AC AND HEATER CONTROL FUSE AND CHECK BLOWER MOTOR FUSE AND RELAY IF ALL IS GOOD CHECK SEE IF POWER GOING TO AC AND HEATER CONTROL SWITCH IF YES THE AC AND HEATER CONTROL SWITCH COULD BE BAD.

Nov 10, 2011 | 1991 Mazda 323

1 Answer

Type your problem for a solution..HEAT NOT BLOWING FUSE OK.


REMOVE HEATER BLOWER MOTOR AND HOT WIRE IT.IF HEATER BLOWER MOTOR WORKS WHEN HOT WIRED EITHER BLOWER RELAY BAD OR AC AND HEATER CONTROL SWITCH NOT WORKING.IF BLOWER DONT WORK WHEN HOT WIRED BLOWER MOTOR IS BAD.

Oct 25, 2011 | 1997 Nissan Quest

1 Answer

THE AC WONT BLOW OR THE HEATER


CHECK BLOWER MOTOR FUSE AND RELAY.IF BOTH GOOD.REMOVE BLOWER MOTOR HOTWIRE IT.IF DONT WORK REPLACE BLOWER MOTOR.IF BLOWER MOTOR WORKS.HEATER AND AC CONTROL SWITCH IS BAD.

Apr 30, 2010 | 2005 Chevrolet TrailBlazer

1 Answer

Heater & ac


this is usually a bad blower motor resistor. It is usually where your blower motor is and it could be behind or under your glove box.

Jan 23, 2009 | 2001 Hyundai Elantra

2 Answers

Air stopped blowing on ac/heater


Check your fuses.If you have a test light, unplug the blower motor, start the car, turn the fan on, if you have power to the blower plug, the blower motor is bad. If no power, if it's not a fuse, check the blower motor resistor. Should be mounted right next to the blower motor. It is inserted into the evaporator box

Nov 22, 2008 | 2002 Dodge Durango

Not finding what you are looking for?
2001 Chrysler Town & Country Logo

77 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...