Question about 2001 Audi A4

1 Answer

Installing front tag

Hi,
I have the bracket plate to install the front tag, but how do I do it?

Thanks in advance

Posted by on

1 Answer

Check out ecstuning.com and they have a front bumper bracket.

Posted on Sep 19, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Is fixing the ultinator yourself an easy job


  1. Disconnect the negative battery cable.
  2. Remove the drive belt.
  3. If necessary, remove any splash shielding for easier access to the alternator.
91072p19.gif

For easiest access to the alternator assembly, first remove the splash shield mounting fasteners ...
Click to Enlarge 91072p18.gif

... then swing it out of the way for access to the alternator assembly
Click to Enlarge 91072p17.gif

View of the alternator electrical connections-(A) battery positive, (B) field terminals, (C) wire harness hold down, (D) ground terminal

  1. Tag and disengage the alternator wiring.

It may be necessary to remove the alternator and mounting bracket from the vehicle as an assembly.

  1. If equipped, remove the front alternator assembly mounting plate.
91072p09.gif

Remove the six nuts and bolts that secure the front mounting plate to the alternator assembly
Click to Enlarge 91072p10.gif

Remove the front alternator assembly mounting plate from below the vehicle
Click to Enlarge

  1. Unfasten the alternator mounting and pivot bolts and remove the alternator.
  2. If installing the original alternator assembly, push out the pivot bushing as illustrated.
91072p11.gif

After removing the alternator assembly front mounting plate, remove the front engine-to-alternator bracket mounting stud
Click to Enlarge 91072p08.gif

Remove the two alternator bracket-to-engine mounting bolts
91072p12.gif

Remove the alternator and mounting bracket assembly from the vehicle
Click to Enlarge 91072p14.gif

If re-installing, the alternator has a pivot bushing on the pivot arm that should be pushed out before installation
91072p15.gif

Mount a C-clamp and 18mm socket on the alternator pivot bushing ...
91072p13.gif

... then compress the C-clamp until it pushes the alternator pivot bushing out

To install:

  1. Mount the alternator to the brackets with the nuts and bolts. Tighten the two mounting bolts and nuts to 40 ft. lbs. (54 Nm).
  2. If the alternator and mounting bracket were removed as an assembly, install the assembly into the vehicle.
  3. If removed, install the front mounting plate.
  4. Engage the alternator electrical connections.
  5. If removed, install the splash shield.
  6. install the drive belt and attach the negative battery cable.
  7. shinehutt_58.gifshinehutt_57.gifshinehutt_56.gifshinehutt_55.gifshinehutt_54.gifshinehutt_53.gifshinehutt_52.gifshinehutt_51.gif
the job is akward ive incl as much info you need to repair yourself

plz comment reply if need more info

Jan 20, 2011 | 1995 Jeep Grand Cherokee

1 Answer

Batter wont charge, jeep idles for about a min then dies. Need to replace alternator, but dont know how


I have the same Jeep model 5.2L V8, to replace the alternator, check the next procedure...

Once the determination is made that the alternator is at fault, off vehicle testing can be used to determine the defective component inside the alternator.
See Figures 1 through 11
  1. Disconnect the negative battery cable.
  2. Remove the drive belt.
  3. If necessary, remove any splash shielding for easier access to the alternator.
zjlimited_482.jpg

Fig. 1: For easiest access to the alternator assembly, first remove the splash shield mounting fasteners ...

zjlimited_483.jpg

Fig. 2: ... then swing it out of the way for access to the alternator assembly

zjlimited_484.jpg

Fig. 3: View of the alternator electrical connections-(A) battery positive, (B) field terminals, (C) wire harness hold down, (D) ground terminal

  1. Tag and disengage the alternator wiring.
It may be necessary to remove the alternator and mounting bracket from the vehicle as an assembly.
  1. If equipped, remove the front alternator assembly mounting plate.

zjlimited_485.jpg

Fig. 4: Remove the six nuts and bolts that secure the front mounting plate to the alternator assembly

zjlimited_486.jpg

Fig. 5: Remove the front alternator assembly mounting plate from below the vehicle

  1. Unfasten the alternator mounting and pivot bolts and remove the alternator.
  2. If installing the original alternator assembly, push out the pivot bushing as illustrated.
zjlimited_487.jpg

Fig. 6: After removing the alternator assembly front mounting plate, remove the front engine-to-alternator bracket mounting stud

zjlimited_488.jpg

Fig. 7: Remove the two alternator bracket-to-engine mounting bolts

zjlimited_489.jpg

Fig. 8: Remove the alternator and mounting bracket assembly from the vehicle



To install:

  1. Mount the alternator to the brackets with the nuts and bolts. Tighten the two mounting bolts and nuts to 40 ft. lbs. (54 Nm).
  2. If the alternator and mounting bracket were removed as an assembly, install the assembly into the vehicle.
  3. If removed, install the front mounting plate.
  4. Engage the alternator electrical connections.
  5. If removed, install the splash shield.
  6. stall the drive belt and attach the negative battery cable.

Hope this helps (remember to rate and comment this answer).

Jan 16, 2011 | 1994 Jeep Grand Cherokee

1 Answer

How to get the half shaft out


Halfshaft -sorry but the diagrams didn't paste into the fixya.com window, just the text. Also, this was for a 3.2L engine.
REMOVAL & INSTALLATION

  1. Before servicing the vehicle, refer to the precautions in the beginning of
    this section.
  2. Remove or disconnect the following:

    • Negative battery cable
    • Front wheel
    • Radiator skid plate
    • Transfer case skid plate
    • Brake calipers and mounting bracket
    • Brake rotor
    • Wheel speed sensor
    • Steering knuckle

  3. Support the axle housing with a jack. Unbolt the axle mounting bracket and
    remove the halfshaft/bracket assembly.
    To install:

  4. Install or connect the following:

    • Axle/bracket assembly. Tighten the bracket flange bolts to 85 ft. lbs. (116
      Nm) and the bracket mounting bolts to 112 ft. lbs. (152 Nm).
    • Steering knuckle
    • Wheel speed sensor
    • Brake rotor
    • Brake caliper and mounting bracket. Tighten the bracket bolts to 115 ft.
      lbs. (155 Nm).
    • Transfer case skid plate. Tighten the bolts to 27 ft. lbs. (37 Nm).
    • Radiator skid plate. Tighten the bolts to 58 ft. lbs. (78 Nm).
    • Front wheel
    • Negative battery cable

  5. Check the wheel alignment and adjust as necessary.





    Fig. 1: Exploded view of the left halfshaft, axle shaft and
    axle disconnect
    7924bg26.gif






    Fig. 2: Exploded view of the right halfshaft and mounting
    bracket
    9308bg03.gif



prev.gif next.gif

Oct 31, 2010 | 2002 Isuzu Rodeo Sport

1 Answer

How do I remove the alternator on my 1997 Grand cherokee ??


Removal & Installation

Once the determination is made that the alternator is at fault, off vehicle testing can be used to determine the defective component inside the alternator.
See Figures 1 through 11
  1. Disconnect the negative battery cable.
  2. Remove the drive belt.
  3. If necessary, remove any splash shielding for easier access to the alternator.
4b9b20c.jpg

Fig. 1: For easiest access to the alternator assembly, first remove the splash shield mounting fasteners ...

966f538.jpg

Fig. 2: ... then swing it out of the way for access to the alternator assembly

c0f1ee6.jpg

Fig. 3: View of the alternator electrical connections-(A) battery positive, (B) field terminals, (C) wire harness hold down, (D) ground terminal
  1. Tag and disengage the alternator wiring.

It may be necessary to remove the alternator and mounting bracket from the vehicle as an assembly.
  1. If equipped, remove the front alternator assembly mounting plate.
cc29745.jpg

Fig. 4: Remove the six nuts and bolts that secure the front mounting plate to the alternator assembly

c745bd7.jpg

Fig. 5: Remove the front alternator assembly mounting plate from below the vehicle
  1. Unfasten the alternator mounting and pivot bolts and remove the alternator.
  2. If installing the original alternator assembly, push out the pivot bushing as illustrated.
be6f2a8.jpg

Fig. 6: After removing the alternator assembly front mounting plate, remove the front engine-to-alternator bracket mounting stud

bb62acc.jpg

Fig. 7: Remove the two alternator bracket-to-engine mounting bolts

00eb4da.jpg

Fig. 8: Remove the alternator and mounting bracket assembly from the vehicle

4ab85a1.jpg

Fig. 9: If re-installing, the alternator has a pivot bushing on the pivot arm that should be pushed out before installation

14a5009.jpg

Fig. 10: Mount a C-clamp and 18mm socket on the alternator pivot bushing ...

c4fac77.jpg

Fig. 11: ... then compress the C-clamp until it pushes the alternator pivot bushing out
To install:
  1. Mount the alternator to the brackets with the nuts and bolts. Tighten the two mounting bolts and nuts to 40 ft. lbs. (54 Nm).
  2. If the alternator and mounting bracket were removed as an assembly, install the assembly into the vehicle.
  3. If removed, install the front mounting plate.
  4. Engage the alternator electrical connections.
  5. If removed, install the splash shield.
  6. Install the drive belt and attach the negative battery cable.

Also, other details can find in your Grand Cherokee Repair Manual.

Good luck (and remember rated this).

Mar 21, 2010 | 1997 Jeep Grand Cherokee

2 Answers

How to get the alternator out


Jeep Cherokee 1984-1998
Alternator - Removal & Installing

  1. Disconnect the negative battery cable.
  2. Remove the drive belt.
  3. If necessary, remove any splash shielding for easier access to the alternator.
b2a277c.jpg

Fig. 1: For easiest access to the alternator assembly, first remove the splash shield mounting fasteners...

8ce56a0.jpg

Fig. 2: ...then swing it out of the way for access to the alternator assembly

0dd4858.jpg

Fig. 3: View of the alternator electrical connections-(A) battery positive, (B) field terminals, (C) wire harness hold down, (D) ground terminal

4. Tag and disengage the alternator wiring.

It may be necessary to remove the alternator and mounting bracket from the vehicle as an assembly.



5. If equipped, remove the front alternator assembly mounting plate.

c4f5c79.jpg

Fig. 4: Remove the six nuts and bolts that secure the front mounting plate to the alternator assembly

5d9addd.jpg

Fig. 5: Remove the front alternator assembly mounting plate from below the vehicle

6.
Unfasten the alternator mounting and pivot bolts and remove the alternator.
7.
If installing the original alternator assembly, push out the pivot bushing as illustrated.

c83e7aa.jpg

Fig. 6: After removing the alternator assembly front mounting plate, remove the front engine-to-alternator bracket mounting stud

6b7fb06.jpg

Fig. 7: Remove the two alternator bracket-to-engine mounting bolts

53ee592.jpg

Fig. 8: Remove the alternator and mounting bracket assembly from the vehicle

ecee6df.jpg

Fig. 9: If re-installing, the alternator has a pivot bushing on the pivot arm that should be pushed out before installation

953fb87.jpg

Fig. 10: Mount a C-clamp and 18mm socket on the alternator pivot bushing...

18ac3b3.jpg

Fig. 11: ...then compress the C-clamp until it pushes the alternator pivot bushing out


To install:

8.Mount the alternator to the brackets with the nuts and bolts. Tighten the two mounting bolts and nuts to 40 ft. lbs. (54 Nm).
9.
If the alternator and mounting bracket were removed as an assembly, install the assembly into the vehicle.
10.
If removed, install the front mounting plate.
11. Engage the alternator electrical connections.
12.
If removed, install the splash shield.
13.
Install the drive belt and attach the negative battery cable.


More details for testing and diagnostics you can revies:
- Section-8A-Electrical-95xj8a
- Section-8B-Battery-Starter-Generator-Service-95XJ8B

I hope help you whit this, good luck (remember rated this help).

Sep 16, 2009 | 1996 Jeep Cherokee

1 Answer

How do you put a front tag on 2008 fords


you need a front license plate bracket. You should see two dimples to carefully drill a hole in the bumper. You may be able to mount the plate directly in these holes w/o the bracket.

Jun 27, 2009 | 2008 Ford Taurus Sedan

1 Answer

Front right door window will not go up or down, it is electric. it works, some times, and some times not. it is in the down position. Would like to move to up position. I live in Arizona, I need it up for...


does it act the same whether you use the driver door switch or the passenger door switch? Please rate as fixya if this helps. thanks

here's repair procedure

Window Regulator, Front Door, Explorer Removal
srk~us~en~file=ani_caut.gif~gen~ref.gif WARNING: IF THE REGULATOR COUNTERBALANCE SPRING MUST BE REMOVED OR REPLACED FOR ANY REASON, MAKE SURE THAT THE REGULATOR ARMS ARE IN A FIXED POSITION PRIOR TO REMOVAL TO PREVENT POSSIBLE INJURY DURING C-SPRING UNWIND.
  1. Remove front door trim panel and front door trim shield . Refer to Section 01-05B .
Trim Panel, Front Door, Explorer Hi-Series, Two-Door and Four-Door Removal and Installation
  1. Remove the two screws retaining the front door trim panel (23942) located above the window regulator handle (23342) . Also remove one screw in the upper front portion of front door trim panel .
  1. Remove inside door handle cup (22634) at the window regulator handle using a screwdriver or sharp object. Retention nibs will flex for easy removal.
  1. To remove window regulator control switch (14529) and outside rear view mirror control (17B676) , use notch located at lower end of outside rear view mirror control using a screwdriver to lift and remove.
  1. Remove outside rear view mirror control from front door trim panel pulling wire harness from inside of front door trim panel .
  1. From bottom of outside rear view mirror control, remove two screws and disconnect connector from switches. NOTE: Do not pull on the front door trim panel to remove clips from the inner panel holes.
  1. At each plastic clip location, pry the front door trim panel away from the door inner panel using the front door trim panel removing tool from Rotunda Moulding Trim Kit 107-00401 or equivalent. NOTE: Pay special attention to the cut-out in the door trim panel for the door handle, so that it clears the handle during removal without breakage.
  1. When wiring and disengagement of trim clips is completed, it is recommended that to remove panel, lift slightly to remove flange at the top of door trim panel from trough in the glass weatherstrip.
  1. Disconnect socket and bulb from illuminated interior lamp (13776) before total removal of front door trim panel. For installation, follow removal procedures in reverse order. Replace any bent, damaged or missing plastic clips on the front door trim panel to the front door trim panel , firmly loading clips into slots provided on front door trim panel .

    Trim Panel, Front Door, Explorer Hi-Series Four-Door

    a9ce4e4.gif
  1. Remove inside door belt weatherstrip and glass stabilizer.
  1. Remove front door window glass as described in this section.
  1. Remove two nut and washer assemblies attaching the equalizer bracket.
  1. Remove three rivets (manual) or four rivets (power) attaching the regulator base plate to front door trim panel finish panel (23712) .
  1. Remove window regulator electric drive and front door window channel bracket from vehicle.
  1. Working on a bench, carefully bend tab flat to remove arm slides from front door window channel bracket .
  1. Install new window regulator electric drive arm plastic guides into front door window channel bracket and bend tab back to 90 degrees. Use care not to break tab; if tab is cracked or broken, replace front door window channel bracket . Make sure rubber bumper is installed properly on new front door window channel bracket , if replacement is made.

    9b5ccd1.gif

Installation
NOTE: The front door window channel bracket and window regulator electric drive are installed into the vehicle as one assembly. The front door window channel bracket may be disassembled from the window regulator electric drive as described in Steps 7 and 8 of Window Regulator, Removal.
  1. Install front door trim panel finish panel with preassembled glass bracket into vehicle. Set the regulator base plate to window regulator electric drive using base plate locator tab as a guide.
  1. Install three (manual) or four (power) rivets (385189-S100) to attach regulator to front door trim panel finish panel . Two 1/4-20 x 1-inch bolts and two 1/4-20 nut and washer assemblies may be used as alternates for glass retention. However, torque must not exceed 4-7 Nm (3-5 ft-lb). Equivalent metric retainers may be used.
  1. Install equalizer bracket.
  1. Install inside door belt weatherstrip and glass stabilizer.
  1. Lower regulator arms to access holes in front door trim panel finish panel . Install front door window glass as outlined.
  1. Adjust glass to ensure proper alignment with glass run. Cycle glass for smooth operation.
  1. Install front door trim panel and front door trim shield . Refer to Section 01-05B .

Apr 20, 2009 | 1994 Ford Explorer Limited

1 Answer

Replace a window regulator in a 1994 ford explorer


wow, a lot of work to do.

Window Regulator, Front Door, Explorer Removal
srk~us~en~file=ani_caut.gif~gen~ref.gif WARNING: IF THE REGULATOR COUNTERBALANCE SPRING MUST BE REMOVED OR REPLACED FOR ANY REASON, MAKE SURE THAT THE REGULATOR ARMS ARE IN A FIXED POSITION PRIOR TO REMOVAL TO PREVENT POSSIBLE INJURY DURING C-SPRING UNWIND.
  1. Remove front door trim panel and front door trim shield . Refer to Section 01-05B .
  1. Remove inside door belt weatherstrip and glass stabilizer.
  1. Remove front door window glass as described in this section.
  1. Remove two nut and washer assemblies attaching the equalizer bracket.
  1. Remove three rivets (manual) or four rivets (power) attaching the regulator base plate to front door trim panel finish panel (23712) .
  1. Remove window regulator electric drive and front door window channel bracket from vehicle.
  1. Working on a bench, carefully bend tab flat to remove arm slides from front door window channel bracket .
  1. Install new window regulator electric drive arm plastic guides into front door window channel bracket and bend tab back to 90 degrees. Use care not to break tab; if tab is cracked or broken, replace front door window channel bracket . Make sure rubber bumper is installed properly on new front door window channel bracket , if replacement is made.

    4a5a8fb.gif

Installation
NOTE: The front door window channel bracket and window regulator electric drive are installed into the vehicle as one assembly. The front door window channel bracket may be disassembled from the window regulator electric drive as described in Steps 7 and 8 of Window Regulator, Removal.
  1. Install front door trim panel finish panel with preassembled glass bracket into vehicle. Set the regulator base plate to window regulator electric drive using base plate locator tab as a guide.
  1. Install three (manual) or four (power) rivets (385189-S100) to attach regulator to front door trim panel finish panel . Two 1/4-20 x 1-inch bolts and two 1/4-20 nut and washer assemblies may be used as alternates for glass retention. However, torque must not exceed 4-7 Nm (3-5 ft-lb). Equivalent metric retainers may be used.
  1. Install equalizer bracket.
  1. Install inside door belt weatherstrip and glass stabilizer.
  1. Lower regulator arms to access holes in front door trim panel finish panel . Install front door window glass as outlined.
  1. Adjust glass to ensure proper alignment with glass run. Cycle glass for smooth operation.
  1. Install front door trim panel and front door trim shield . Refer to Section 01-05B .

Apr 11, 2009 | 1994 Ford Explorer Limited

1 Answer

Installing front license plate on 2008 300C


there is an actual liscence plate bracket u can buy at a chrysler dealership thats fits perfectly on bumber it has teeth that perfectly center the bracket right below the grill it looks great i just had one put one on my 2005 300

Oct 22, 2008 | 2007 Chrysler 300c AWD Sedan New Cars

1 Answer

Need bracket to install the front end tag


You can normally contact a Ford Dealership otherwise potentially order the part via the manufacturer directly. Make sure to contact a local dealer ship to see if they have the part in stock or can order the part for your purchase. Chances are if you figure out the part number/stock number for that part you could possibly even find it else where cheaper on ebay or some one have one on craigslist.

Good luck and we hope this helps you out.

Sep 06, 2008 | 2004 Ford Excursion

Not finding what you are looking for?
2001 Audi A4 Logo

Related Topics:

65 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audi Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

yadayada
yadayada

Level 3 Expert

70387 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

13573 Answers

Are you an Audi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...