Question about 2002 Isuzu Trooper

1 Answer

Have a break calliper with piston that wont push back to fit new breaks what can i do apart from buying a new one

Posted by Anonymous on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,165 Answers

Use a little wd40 or pbblaster penetrating oil and let it soak for an hour. I don't know what you are using to move the piston. What you need is a large C-clamp. Make sure it is an all metal clamp. None of that plastic junk. A few good turns of the handle should start moving the piston.

Posted on Dec 31, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My break went out on my chevy s10 xtreme 2.2L 4cl. there are no leaks and new break pads. I also changed the master cylinder and still no breaks? can you please tell me why?


I assume that you have disc brakes. These require a piston/s to push against the pads to tighten them onto the discs. 2 reasons they may not be working are the calliper pistons are seized up in the callipers and 2 the brake booster is not providing the power assist to actuate the callipers. If you have vacuum booster I would repair/replace the booster or check for vacuum at the booster hose. If you have electric pump booster then check that the pump is getting power and is working.

Nov 23, 2014 | Cars & Trucks

1 Answer

Should piston go all the way back where it is flush with piston outer housing?


Measure the thickness of the disc. It could be thin enough with the worn bads that the piston is coming out so far that it is binding in the bore.

Apr 23, 2014 | 2003 Toyota Celica

1 Answer

Have break calliper piston that wont push back 02 isuzu


Replace the brake caliper if it won't push back. Probably rusted at the piston.

Dec 31, 2010 | 2002 Isuzu Trooper

1 Answer

Break squeals on Ford Focus for first 10mins of drive then ceases


It sounds like a caliper starting to stick, remove the wheels and sheck the callipers for binding of the piston and slides, grease the slides and usa copper grease ( just a little not enough to contaminate the friction surface) on the steel back of the pads. You can buy new anti-rattle hardware that moght help if the callipers are fine.

Oct 27, 2010 | 2008 Ford Focus

1 Answer

2006 ford focus rear brakes


If the piston is stuck out this is due to a seized calliper however a temp Fix is to turn the piston clockwise to force it back in as rear callipers are self releasing so they need to be turned clockwise they will not go stright back without turning. This is due by broken calliper seals although you will temp fix it, It's best to either replace calliper or buy a calliper fixing kit which includes all the seals that need replacing.
Also You will need to Empty the brake fluid out to make it easier to push the piston in it, Then you will need to bleed the whole brake system once fitted back.

Jul 21, 2010 | 2006 Ford Focus

3 Answers

How do i compress the the calipor piston on the rear breaks, is there a special too?


yes, you can rent one from Auto Zone, Advanced Auto Parts, etc.

Jun 12, 2010 | 2003 Jaguar X-Type

1 Answer

Change break pads


for front pads jack and support car remove wheels remove bolts holding calliper [2]remove spring clip pull calliper off remove pads clean housing fit outer pad slowley push calliper piston in using large grips fit inner pad to piston refitcalliper fit bolts refit spring clip can be awkward pump brake pedal until firm check fluid level rear ones are the same but special tool needed to wind calliper pistons back in note make sure brake discs are in good condition first

Dec 30, 2009 | 2000 Volvo S40

1 Answer

Changing the front brake pads.


first off, you need to buy the break pads, break caliper spreader, and you need to know if the bolts have a allen wrench head or a torques head, you can find that out by turning your wheel all the way to the left after you remove the front left tire, take a small hand mirror and look on the back side of the calliper, once you know what it is, you need the socket or wrench that fits it, remove the bolts, then the calliper will pull off by wiggleing it off, then remove the outside pad, take the break calliper spreader and place it the way the break pad sat and screw it pushing the calliper cylinder back as far as possible, then take the calliper spreader off and remove the other pad, install the new pads into the break calliper and replace the calliper back onto the router, (the round disc the calliper was on) line up the holes on the calliper and replace the bolts.......once you have put the calliper back on you must pump the peddle untill they are hard again, about 3-6 times or untill you cant go to the floor anymore. once they are solid again, replace your tire and you should be good to go.....................hope this helps.

Jun 27, 2009 | 1999 Pontiac Grand Prix

1 Answer

2000 Chevy Can't compress brake cylindar


it may be that the flexi brake hose is perrished on the inside and not letting the fluid back up the system. try pushing the piston back with the bleed screw out, if this works then a collapsed flexi hose is favourite. if this is a rear calliper then they may be the screw in type, does the calliper have a lever on it for the parking brake.

Apr 25, 2009 | 2004 Volkswagen GTI

Not finding what you are looking for?
2002 Isuzu Trooper Logo

Related Topics:

33 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...