Question about 1999 Dodge Ram

2 Answers

Window made a pop when I tried to roll down. wont go up or down motor still runs took door panel off there was a plastic white piece that was broken off where does it go and can it be fixed?

Posted by on

  • Christopher Mckay Dec 31, 2010

    does it look like a round bushing that could go into the track on the bottom of the glass

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 376 Answers

Chances are no it cant be fixed. these white clips are the ones that hold the glass to the arm slider. and most of them are glued to the glass and the everyday person does not have access to this kind of glue, so the glass will have to be replaced , I recoment the glass from another vehicle from the local scrap yard. good luck

Posted on Dec 31, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 6,826 Answers

I think the regulator is bad. The motor is probably still good. The white piece is probably plastic and came off of the regulator. Get a replacement regulator at a salvage yard and have it installed by a technician, or do it yourself with instructions.

Posted on Dec 31, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Power windows


You have to replace the broken Window Regulator

The entire cable assy & broken item

Aug 22, 2013 | 2004 Dodge Dakota

1 Answer

Window on passenger side went down wont come back up might be off track how do i take door panel off to roll up window


In the door handle there is a small plastic piece that pops out with a screw driver.

then there are 2 philips screws you take out.

then undo the wires from your door locks and windows and pull from the bottom of the door it should pop off.

Apr 12, 2010 | 2000 Oldsmobile Alero

1 Answer

Question About a Broken Window Support.


SOUND LIKE ITS THE PLASTIC FRAME BROKE TO WINDOW MOTOR AND REGULATOR THAT HOLD GLASS IN PLACE.YOU HAVE TO GO TO DEALERSHIP BODY SHOP PARTS DEPARTMENT.

Feb 27, 2010 | 1999 Oldsmobile Alero

1 Answer

04 GMC ENVOY XU While rolling up the window on my midgate I heard


the plastic part of the window regulator has broken I think on that year the motor and regulator come as a one piece replacement unit and are fairly easy to install,if you remove the inner panel you should be able to see the broken piece when you try to cycle the window.Good luck

Jan 04, 2010 | 2004 GMC Envoy

1 Answer

Power windows roll down slowly


You can try a dry lube or lithium grease on the slow ones, but it sounds more like you need new window motors. Unfortunately Saturns are plastic cars, and... The window motors are not too difficult to change and it requires removing the outer door panel to make it easier to access.

Mar 19, 2009 | 1997 Saturn SL

1 Answer

Window came off track nad wont roll up


you will have to remove the door panel and try to lift the window back up, have a look while holding the window up and see if the bolt/rivet holding the window onto the motor has just come loose or broke. Its quite possible its still bolted up to the assembly but the regulator has broken resulting in the window motor not being able to raise/lower window.
The regulators breaking are a common problem they have plastic usually that wears after so long.

Nov 28, 2008 | 2003 Dodge Durango

Not finding what you are looking for?
1999 Dodge Ram Logo

71 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...