Question about 1997 GMC Sierra

1 Answer

How do you remove a door panel off a 1997 sierra 1500

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 20 Answers

There will be 2 either screws or bolts in the pull pocket of your door panel (arm rest area you use to pull door shut). As well use a clip tool or flat head screwdriver and pop off the little cover that goes behind your inner door handle, be gentle. there will be a screw behind there if i remember correct. as well there is a cover clip just under the part of the trim panel that goes up to the mirror area pop that off. once you have all those handled the rest is just held on by clips to save you grief with scratching the interior of the door begin near the speaker and rocker panel. Work your way around if you begin at the big opening of your door you may scratch the paint and will see it. Best used for this is a automotive clip remover tool. door panel will then be off

Posted on Feb 09, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I replace the door latch on my 1992 GMC Sierra 1500?


remove the inner door panel then disconnect the arms that run from the outside door handle, the inner door handle, the door lock mechanism, from each unit. then undo the 3 bolts/screws on the end of the door to remove the door latch assembly.

Apr 03, 2015 | 1992 GMC Sierra

1 Answer

How to remove door panel from a 1992 GMC sierra 1500


This should give you and idea how to remove your panel, good luck.
1992 GMC sierra 1500 https://www.youtube.com/watch?v=7kHHz7gzT-Q

Jan 07, 2015 | GMC Cars & Trucks

1 Answer

I recently purchased some towing mirrors for my 2007 gmc sierra 1500, how do i change my stock mirrors to these? do you have installation instructions?


Hi, the door panels need to be removed,there are 3 mounting nuts, and a wiring harness,(if mirrors are power).unhook the wire, take the 3 nuts off, and remove the old mirror.Repeat for the other side,and the mirrors should be functional.Good luck...

Sep 22, 2010 | 2007 GMC Sierra 1500

1 Answer

How to take the door panal off a 2000 gmc sierra 1500? to fix speakers in the door?


remove the few screws around the pull handle and or door latch handle. Then pry off the panel. This will damage the plastic snap-in holders. They will have to be replaced. they are very cheap at the dealership or probably even any auto parts store...

Aug 30, 2010 | 2000 GMC New Sierra 1500

2 Answers

How do i install a door handle on a 1997 gmc sierra 1500


I've got a 97 GMC Yukon XL, I have a problem with the inside door handle on the driver side. To open the door I have to pull the handle and give it a shoulder for it to open. I think my problem is my door latch, I think it's giving out? Help

Dec 03, 2009 | 1997 GMC Sierra

1 Answer

Can I pull the grill off the speakers to put them


NO' YOU DONT NEED TO REMOVE THE ENTIRE DOOR PANEL, TO REPLACE SPEAKERS CONNECT WIRING CONNECTOR TO SPEAKER FIT SPEAKER BACK IN GRILLE AND REPLACE RETAINING SCREWS.

Oct 26, 2009 | 2002 GMC Sierra 1500

1 Answer

How do you install an inside door handle on a 1997 GMC Sierra?


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can put the new handle in and reconnect everything

Sep 24, 2009 | 1997 GMC Sierra

1 Answer

How to install passenger side glass on a 1997 gmc sierra 1500. power windows.


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Remove the clips and screws securing the old window to the arm and slide it out through the top of the door (may need to be maneuvered out)

Sep 10, 2009 | GMC K1500 Cars & Trucks

1 Answer

Is it hard to replace a broken door handle on the outside driver side door of a 2004 gmc sierra extra cab with power windows and door locks?


its tricky but not hard. remove the door panel and put the window up, look in with a light and it will be obvious what to do......

Jul 07, 2009 | 2004 GMC Sierra 1500 Crew Cab

Not finding what you are looking for?
1997 GMC Sierra Logo

204 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...