Question about 2008 Toyota Avalon

2 Answers

Maint Reqd indicator light is on...I have 10K oil in; need to reset from 3k....How do I turn off?

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 242 Answers

Set the odometer to trip A, do not remove your finger from button.
Now turn off key, keep pressing the button.
Next turn key on now observe the odometer window you will see some bars disappear, when all this bars disappear you done.

Posted on Dec 31, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,165 Answers

On most cars you would turn on the ignition key, do not start the engine, press the gas pedal to the floor 3 times(if 3 times doesn't work, do it 5 times), turn the key off. When you start the car, the light should be off.

Posted on Dec 31, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Turn light will not turn off, not blinking, When turn on signal or 4 way flashers goes off for a few seconds then comes back on


2006-2015 Toyota Highlander MAINT REQD Light Reset

seventrumpet.com/2006-2015-toyota-highlander-maint-reqd-light-reset/
Mar 15, 2015 - How to MAINT REQD Light Reset on Toyota Highlander 2006, 2007, ...Turn the ignition switch to the "On" position, but do not start the engine ... This procedure should applies to the second and third generation of the Toyota Highlander (2005, 2006, 2007, 2008, ... Your email address will not be published.

Oct 12, 2015 | 2005 Toyota Highlander

1 Answer

Where is the reset button to reset the service indicator light after an oil change? I see instructions on how to do it, but I don't know where the reset button is located.


Here's how you get reset the MAINT REQD light:

1) put the key to the ON position
2) press the mileage reset button on your cluster so it shows total mileage (not trip)
3) put the key to the OFF position
4) press and hold down the mileage reset button, leave it pressed
5) put the key to the ON position
6) wait until the mileage shows 000000 and you can stop pressing the ODO button

If that doesn't work, consult this

http://www.tundrasolutions.com/forums/tundra/115807-reset-maint-reqd-light/

Sep 15, 2010 | 2006 Toyota Sequoia

1 Answer

"MAINT REQD "means?


oil change the owners manual has the directions for resetting it your self
Turning off the Maint Reqd lightSee page 153 of the owners manual. Turn the engine off with the odometer reading showing (not either of the trip indicators). "Turn the ignition switch is set ON while holding down the trip meter reset knob". Some language, eh? "Hold down the knob for at least 5 seconds. The odometer indicates 000000 and the light will go off. AnswerIf you go to the oil change section of the owner's manual it will tell you exactly how to. If you get your oil change at a professional place be sure to ask them to turn it off or take it back and ask them to turn it off. Good Luck!

Aug 03, 2010 | 2007 Toyota Avalon

1 Answer

Changing my oil need to know how to reset mant reqd light


Put the ignition key on , using trip meter button switch display to odometer.
Switch ignition key off.
Press and hold trip meter button , switch the key on ,
continue to hold button for at least 5 sec.
Display indicates " 000000 " and " MAINT REQD " lamp will go off , resetting is complete.

Jul 02, 2010 | 2004 Lexus ES 330

1 Answer

Main reop light in dash


Hello, and welcome to FixYa.

The 'Maint Reqd' light indicates that you are due for an oil change. It will blink 4,500 miles since the light was reset at your last oil change, and stay on steady after 5,000 miles.

If you recently had an oil change, all you need to do is reset your maintenance reqd lamp. The procedure is here on this site inthe 'tips and tricks' section, and it is also in your owner's manual.

Feb 22, 2010 | 2004 Toyota Camry

1 Answer

TOYOTA SIENNA MAINT REQD LITE CAME ON AFTER SCHEDULE MAINTANANCE


If the dealer/mechanic did the service early the light will come on when service is DUE. Go back to him and have it turned off. Search the web someone may have the procedure posted. Usually simple. Google "Toyota service light reset" or "Toyota Maintence light reset" Try this one
  1. With the car started (ignition on), set the LCD odometer readout to total mileage (not trip A or B).
  2. Turn the car off (ignition key to the OFF position).
  3. Push in AND HOLD the button/knob that switches the odometer
  4. Turn key to ON position without starting the car. You will notice the maintenance light blink and go out.
  5. Release the odometer button/knob.
  6. Turn key to OFF position.
  7. That's it! The "MAINT REQD" light has been reset to warn you to change your oil in another 5,000 or 7,500 miles or so.

Feb 05, 2010 | 2004 Toyota Sienna

4 Answers

2005 toyota corolla ce maint. required need to know how to reset.


To reset the system. Turn the ignition key to the "OFF" position with the odometer reading shown. Turn the ignition key to the "ON" position while holding down the trip meter reset knob. Hold down the knob for at least 5 seconds. The odometer indicates "000000" and the light goes off. If the system fails to reset, the light will continue flashing.

Jun 12, 2009 | 2005 Toyota Corolla

2 Answers

Reset my maint reqd light


watch this free video instructions on how to reset your maint reqd light if video dosent work go to www.vehix411.com

May 06, 2009 | 2005 Toyota Corolla

2 Answers

Why does the "Maint Reqd" light turn on in a 2009 Toyota Matrix?


you need to hold down the reset button with one hand while you turn the key on, you will see the 5 lines count down

May 01, 2009 | Toyota Matrix Cars & Trucks

3 Answers

"maint reqd".


That is for oil changes. It come on when the oil change is due.
When you have your oil change done, the lube tech should reset the this light every time.
If you need help resetting the light, let me know.

Apr 02, 2009 | 2005 Toyota Corolla

Not finding what you are looking for?
2008 Toyota Avalon Logo

194 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

77202 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8755 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...