Question about Toyota Previa

2 Answers

Toyot Previa - high mounted stop light

I have a 2003 Toyota Previa and I need to replace the bulb of the high mountd stop light. I have taken out the 2 screws but still cannot remove the lens assembly. What must I do please?

Stuart

Posted by on

  • dolphintom Jul 08, 2008

    Thanks for the reply bigun18. I'm sure you're right but it's very tight and I'm really scared of breaking the lens. Perhaps I need more courage!

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

This is slightly counter-intuitive, but the plastic lens needs to go in and up before it comes out. After removing the two screws, use something thin and flat to pull down on the underside painted part of the wing between the two screws. A little bit of prying downwards. Two raised lips become visible - they are holding the lens from being able to be pushed up and in. A second pair of hands could help. Then use your thumbs on the lens close to the screws, gripping with your fingers on the top of the wing and squeeze up. POP!

Posted on May 18, 2010

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 46 Answers

It probally has holders so u probally need to give it a tug or use a screwdriver to pry on it carfully not to break the lense

Posted on Jul 08, 2008

  • james price Jul 12, 2008

    i think im right but i could be wrong on that model i would call a toyota place and ask them for safe measures

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why is the high mount stop light not working?


The same 15amp fuse for the regular brake lights powers the high mount light. If the regular brake lights work but the high mount does not, it could be the lamp monitor or a wiring problem.

Aug 02, 2014 | 2003 Toyota Corolla

1 Answer

How do replace driver side headlight bulb? What size do I get?


Go to your local auto parts store.Ask at the counter,give them your make and model and year.

High & Low Beam Headlamp Light Bulb Size: 9007
Parking Light Bulb Size: 194NA
Front Turn Signal Light Bulb Size: 7507 Or 2827
Rear Turn Signal Light Bulb Size: 7507
Tail Light Bulb Size: 7443
Stop Light Bulb Size: 7443
High Mount Stop Light Bulb Size: 7506
License Plate Light Bulb Size: 168
Back Up Light Bulb Size: 921
Front Side Marker Light Bulb Size: 194NA
Rear Sidemarker Light Bulb Size: 7443
Dome Light Bulb Size: DE3175
Trunk/Cargo Area Light Bulb Size: DE3022

The bulb is in a socket which will twist out,then there may be a clip that holds the bulb in.

Jun 25, 2011 | 2003 Mitsubishi Lancer

2 Answers

Wondering how to change the third brake light (one located in back window) on a 2006 hyundai sonata


High Mounted Stop Lamp Removal & Installation To Remove:
High Mounted Stop Lamp hyundai-06-00-5896.gif

  1. Disconnect battery negative cable.
  2. Disconnect high mounted stop lamp electrical connector from inside trunk.
  3. Remove package tray.
  4. Replace bulb from package tray.
To Install:
High Mounted Stop Lamp hyundai-06-00-5896.gif

  1. Install package tray.
  2. Connect high mounted stop lamp electrical connector from inside trunk.
  3. Connect battery negative cable.
prev.gif next.gif

Oct 12, 2010 | 2006 Hyundai Sonata

1 Answer

How do you replace the high mount stop light bulb on the 2004 highlander?


Did my 2005 highlander. You replace from the inside. On the inside of the rear hatch, the top center plastic molding gentle snaps off. You twist out the bulb holder and replace with one #921 bulb

Aug 18, 2010 | 2004 Toyota Highlander

1 Answer

How to replace dash light bulb of 1991 Toyota Previa van


pop fuse cover, remove vent housing, remove speedo upper cover, remove 4 bolts holding speedo remove speedo, change bulb

Mar 31, 2010 | 1991 Toyota Previa

2 Answers

My 1996 Toyota Previa shimmeys when it is stopped;when


check the tick over speed if its slow, less than 850 950 rpm in gear that why it shimmeys,, the engine is trying to stall in gear,,,if you need to bring up the tick over speed have some body in the car holding the brakes down for you as it needs to be ajusted with the car in gear,,and running yourself over hurts??? the car should just creep forwards with the engine runing in gear with the brake off,,,tickover speed of 950rpm

Mar 07, 2010 | 1996 Toyota Previa

1 Answer

Brake light not working


Assuming you tried a new bulb(bulbs can look ok even though they are broken) i would suggest you locate the fuse for that light and check/renew

Mar 07, 2009 | 1997 Toyota Previa

1 Answer

How to replace headlight on a 2003 Chevy Tracker


There are two black plastic clips behind the the air filter, remove them and release the whole assembly to access the lights.

If you still get in troubles, have it replaced at a petrol station, they will help you in fitting the bulb, and it won't be expensive.


Here follows
2003 Chevrolet Tracker Light Bulb Size Chart
Low Beam Headlight Bulb Size: 9003/HB2
High Beam Headlamp Light Bulb Size: 9003/HB2
Parking Light Bulb Size: 1157A
Front Turn Signal Light Bulb Size: 1157A
Rear Turn Signal Light Bulb Size: 921
Tail Light Bulb Size: 7443
Stop Light Bulb Size: 7443
High Mount Stop Light Bulb Size: 168 Or 921
License Plate Light Bulb Size: 168
Back Up Light Bulb Size: 921
Front Sidemarker Light Bulb Size: 194
Ash Tray Light Bulb Size: 74
Step/Courtesy Light Bulb Size: 168
Trunk/Cargo Area Light Bulb Size: 168
Instrument-General Light Bulb Size: 158 or 74
Check Engine Indicator Light Bulb Size: 74
Hi-Beam Indicator Light Bulb Size: 74
Seat Belt Indicator Light Bulb Size: 74
Brake Warning Light Bulb Size: 74
Automatic Transmission Indicator Light Bulb Size: 74
Directional Signal Indicator Light Bulb Size: 74

Oct 02, 2008 | 2003 Chevrolet Tracker

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

566 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

70365 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...