Question about 2009 Chevrolet Equinox
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Replace headlight bulb
actually according to saturn you must remove the front bumper to remove the headlight to be able to replace the bulb,,,if you got small hand you can remove the front part of the inner fender liner and go up thru there and do it,you cant see it ,, you gotta feel it,yes dumb idea i agree,i gotta work on them all day
Posted on Oct 09, 2009
The adjustment screws/nuts should be located either on the top of the headlamp assembly,
behind the headlamp assembly, or near the frame rail by the radiator
You will have vertical adjustment screws for each independent beam (separate highs and separate lows, but will be same screw if highs and lows are the same bulb). You may also have additional horizontal adjustment screws as well
Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)
For Low Beams: If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.
For High Beams (if separate from low beams): Aim the headlight directly at the line you marked on the wall.
Posted on Nov 12, 2009
under the hood at the back of the head lights you can twist and unplug the bulb or they will do it at the part store for you most the time
Posted on Jul 29, 2010
Remove the 5 screws in the wheel well and pull it down enough to get your hands in to the light housing. Should take longer to remove the screws than replace bulb. NICE ENGINEERING GMC.
Posted on Feb 12, 2011
SOURCE: how do I replace headlight
What I did was remove the air filter casing. It pops out. slide over the casing and you have access to the lightbulb.
twist off the bulb assembly and pull off the bulb to replace it.
Posted on Feb 20, 2011
Tips for a great answer:
Nov 29, 2015 | Mazda Cars & Trucks
Oct 05, 2012 | 2009 Chevrolet Chevrolet Equinox LT
Mar 02, 2012 | 2009 Chevrolet Equinox
Jan 04, 2012 | 2008 Chevrolet Equinox
Dec 06, 2010 | 2005 Chevrolet Equinox
Nov 12, 2009 | 2009 Chevrolet Equinox
Dec 20, 2008 | 2005 Chevrolet Equinox
722 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: