Question about Mahindra Scorpio

Open Question

MAhindra 8020 tractor has problem with electric connection because it does not turn on when you turn on or start the ignition key but if you start it directly from the start it starts.how can i solve this problem

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 104 Answers

SOURCE: diesel engine stalls

Fuel Filter! Check also for water - there should be possibley a drain on the bottom of the fuel filter, try that first

Good Luck

Posted on Mar 19, 2009

  • 48 Answers

SOURCE: car wont start

try and listen where the fizzing sound is coming from. go to the fuse box where the relays are.put your hand on the relays when the key is turned and identify the one making the noise. sounds like the start relay is faulty. needs changing. hope this helps.

Posted on Apr 10, 2009

  • 1 Answer

SOURCE: left key in ignition overnight, now car wont start

I have a 2005 honda odessey. I left the key in the ignition in the on position. The battery is dead. Do I have to recharge or will it recharge over night?

Posted on Jun 12, 2009

redgs95
  • 15 Answers

SOURCE: My '98 S10 ignition switch will click, then work.

first check all cables for corrosion on the battery. then go under the truck and check all cables that are on the starter. if they are clean then replace the starter because the solenoid is going bad.

Posted on Jul 28, 2009

Suzman
  • 642 Answers

SOURCE: ignition on jeep yj will not start engine. all

Before blaming the starter make sure the battery is fully charged. It should be around 13V.
Starter circuits for the most part operates in the following way. Turning the ignition key supplies power to a relay situated in the engine compartment which in turn activates the solenoid on the starter which powers the starter itself.
Make sure your vehicle is in Neutral(Manual gearbox) or Park(Auto box) Locate the starter motor. On the starter there is another cylinder like object called the solenoid. There is a thick red wire running from the battery connected to this. There is also a much thinner wire which activates the solenoid. To test the starter run a wire from the + on the battery to where the thin wire connects on the solenoid. (ignition must be off) This should activate the starter and turn the engine. If nothing happens the starter is probably at fault. Before removing the starter make sure that the engine is properly earthed as this could also give problems.
If the starter does kick in the problem is further "upstream" Most probable cause would be the relay. If you can locate it, replace since it is relatively cheap.
Starter repair is best left to the experts. Get a quote for a new starter before you have the old one repaired. You'd be surprised at how many times it turns out that replacement costs the same as repair.
Let us know if you've solved the problem.

Posted on Dec 10, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2002 mahindra 6000 steering wheel turns infintly in both direction but no wheel movement weather tractor is on or off. Fluid reservoir is full.


either the pump is not working or the control valves are not working
have a service technician come out to diagnose the fault

May 07, 2017 | Mahindra Cars & Trucks

1 Answer

2015 Force tractor 105p. Why won't it start?


better find a backup tractor and have it repaired

Oct 01, 2015 | Mahindra Cars & Trucks

1 Answer

Mahindra tractor model 3525 diesel won't start need to check intake heater but i don't know where it is


The intake heater is located in the intake manifold. Should be a heavy wire going to it.

Jan 19, 2015 | Mahindra Cars & Trucks

1 Answer

Diesel pump replaced - do not start


IF you have steel lines to the injectors then crack the injector nuts and turn over until the fuel drips from the nuts. Check that you connected the stop solenoid at the pump as it will not allow start until it receives power from the ignition. Bleed any bleed screws on the pump

Feb 01, 2014 | Mahindra Scorpio Cars & Trucks

1 Answer

Everything is fine, but then without warning, i turn ignition key and everything blacks out


Sounds like a loose connection. Check all battery and starter connections for clean and tight connections.

Oct 28, 2012 | 1995 Oldsmobile Cutlass Supreme

1 Answer

I have a 1993 gmc suburban 1500 in it dont start up at all dont make no nose when u turn the key.it use to act crazy like run great all day intel u turn it off then it wont start back up intel later u will...


Leave the starter alone, If you turn the key and it does not make noise then you are going to need a ignition switch, electrical part, the ignition switch the electrical part it is located on the steering colum under the dash. look under the dash along the steering column now turn the key as you cycle it do you see a rod moving? where that rod connects to is the" electrical ignition switch part" here I made a drawingcansmo_3.png

Apr 29, 2011 | GMC Suburban Cars & Trucks

1 Answer

We need to replace the ignition lock on a 2004 Grand Am.


Hello,

The ignition switch is immediately behind and attached to the ignition lock cylinder. The ignition lock cylinder is where you place the key to start your vehicle. If you are having problems with your vehicle not starting and or turning the key, more than likely you need to replace the ignition lock cylinder. It is common for these to go bad in GM vehicles. To replace the ignition switch of Your car please get these instruments (Flat head screwdriver, Mechanic's gloves, Socket wrench with adapters, Lint-free cloth)and carefully follow the steps below:
  1. Disconnect the negative battery cable from the terminal of your Pontiac Grand Am's battery. This will ensure that you avoid the potential of electrocution as well as accidental inflation of the air bag. After disconnecting the battery, wait 15 minutes before performing any work on the car.
  2. Remove the three flat head screws from the steering column cover to access the ignition switch assembly. If the covers and interior parts of the steering column are dirty or dusty, try cleaning them with a damp, lint-free cloth.
  3. Depress the silver button on the column underneath the ignition switch if your key is still stuck in the lock cylinder. You will need to turn the key to the "Off" position and remove it in order to remove the rest of the ignition switch assembly.
  4. Remove the two connection bolts holding the ignition switch assembly into place. Disconnect the electrical connection tab leading to the ignition switch as well as the tab that sits behind the ignition switch once you slide it out from the steering column console.
  5. Clip the electrical connection tab to the new ignition switch for your 2004 Pontiac Grand Am and slide the ignition switch into place. You will need to have the new key in the ignition switch as you slide it into place and turned to the "Off" position. Once it matches the exact position of the previous ignition switch, rotate the key to the "On" position, and you should hear a click from a tab that extends from the bottom of the ignition switch and connects with the ignition switch housing on the steering column. Reconnect the electrical connection tab leading to the ignition switch.
  6. Reconnect the negative battery terminal and turn your car on to make sure that you have made all of the connections correctly between the steering column and the new ignition switch. Reinstall the steering column panel coverings.
Hope this helps. Thank You for using FixYa!!!

Jan 18, 2011 | 2004 Pontiac Grand Am

2 Answers

My 2001 Impala ignition won't turn when I insert the key. How do I replace the tumbler?




  • Open the hood and disconnect the negative battery cable with an adjustable wrench. Wait a few minutes before starting work to allow any current to dissipate. Set the parking brake.
  • 2 Tilt the steering wheel down to the lowest position. Move the gear shift lever to first gear. Leave the key in the ignition. Remove the lower under dash panel plastic clips and screws with a screwdriver. Lift the lower panel upward and remove the upper clips. Disconnect any electrical connections and remove the lower trim panel from the work area. Move the gear shift lever to the Park position and turn the key off.
  • 3 Remove the bolts from the knee bolster plate with a socket wrench and remove the plate from the work area. Remove the two ignition switch bolts using a socket wrench. Disconnect the electrical connector and remove the ignition switch.
  • 4 Install the new ignition switch using the retaining bolts and tighten with a socket wrench. Connect the electrical connector. Install the knee bolster plate and bolts using a socket wrench. Turn the ignition on and move the gear lever to first gear.
  • 5 Connect any electrical connections to the lower trim panel. Install the lower trim panel using the upper clips. Install the bottom screws with a screwdriver and insert the plastic clips. Shift the gear lever into Park and return the steering wheel to its normal operating position. Connect the negative battery cable with an adjustable wrench and close the hood. Release the parking brake. Start the engine to make sure the new ignition switch is operating properly.




  • Dec 04, 2010 | 2003 Chevrolet Impala

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    122 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Mahindra Experts

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22095 Answers

    sachin sharma
    sachin sharma

    Level 2 Expert

    171 Answers

    L Pfaff
    L Pfaff

    Level 3 Expert

    11573 Answers

    Are you a Mahindra Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...