Question about Bentley Turbo

1 Answer

Hello This is my first time ! I have a intermitant fault with my blower / heater fan motor? It seems that I have all the controls and vents opporational ,but the fan is silent. if I go for a few miles (15) or over a bump it does sometimes kick in . When I stop and turn off the engine it the same problem. With the igintion on only I have tested all the connectiosn and looked at the relays I cannot drive the car due to not having a de mist Thanks Peter

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Expert
  • 4,070 Answers

Hi and welcome to FixYa!
Definitely a worn out fan motor. It turns when you hit the bump because it makes a contact somehow. But once disengaged it won't turn anymore. Have the fan motor replaced and you'll be good.

Hope this helps and thank you for using FixYa! Happy New Year!

Posted on Dec 31, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Location for blower motor/heater/fan fuse?


Before you rip, check the 30A HEATER CIRCUIT BREAKER in the instrument panel fuse panel. The input is hot with the engine running. CB output connects directly to the heater blower motor. A cluster of heater blower motor resistors determines blower speed as selected by the blower switch in the heater control assembly. The switch setting is sent to the powertrain control module (PCM) which acts to turn the blower motor on at the selected speed.

Sep 22, 2012 | 1994 Ford Escort

1 Answer

2003 mitsubishi outlander heater fan doesn't work, how might I fix it?


either bad blower motor resistor (least expensive fix to atempt) , or blower motor bad or electrical circuits to motor

Dec 17, 2011 | 2003 Mitsubishi Outlander

2 Answers

On my 1998 olds 88 I don't seem to have a good volume of air coming from the vents. The fans blow the a/c is cold but just not good air flow. How can increase the air flow?


Hello and welcome to FIxYa!
You may want to check on the vents for it can be closed half way. If the vents are good then the problem will surely be on the blower itself. It can be worn out that's why the blower motor blows weak. Once replaced I believe you'll be good.
Hope this helps and thank you for using FixYa! Have a good one!

Aug 09, 2011 | Oldsmobile 88 Cars & Trucks

1 Answer

Heater control only works on high and fan doesnt blow heat thru the vents sounds like its a fan being blown in the wind.


100%: Heater Control on High Only?
This is the Blower Motor Resistor that needs to be replaced. It is located adjacent to the Blower Motor.

Jan 28, 2010 | 2000 Oldsmobile Alero

1 Answer

Vent fan works intermitantly. Will not go on at


good be the blower motor common problem.you can test with atest light, turn on blower remove blower motor plug and test for power.

Oct 03, 2009 | 2004 Cadillac Deville

1 Answer

Intermitant Blower Motor


2 possible causes. 1 when blower is not working try banging on motor if it goes on thats the problem if not possible blower fan speed resistor.

Aug 26, 2009 | 2005 Chevrolet Aveo

1 Answer

Heat/ac blower motor works on high. intermittent on other speeds.


Check the blower resistor pack - usually located in the heater air ducting in the blower fan airflow. Check for loose connections and open circuit resistors on the unit.
If speed 4 works always, its unlikely to be the blower motor ground connection.

Aug 10, 2009 | 2004 GMC Canyon

1 Answer

The climate control will not work properly ,,work intermitent .19


Blower motor control module probably , but without testing that's just a guess . Do you know how to do automotive electrical testing ? Testing B+ to the module ? Do you know where the module is ? You can find a wiring diagram here , http://www.bbbind.com/free_tsb.html There is a fuse for the blower motor in the I/P fuse box , HVAC blower 10amp ,

Mar 21, 2017 | 1995 Oldsmobile Aurora

2 Answers

A/c problems


most probable cause.. blower motor resister. & vaccuum leak to control blend doors or electrical actuator for blen door

Aug 02, 2008 | 2004 Chevrolet TrailBlazer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

32 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bentley Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

75824 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

881 Answers

Are you a Bentley Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...