Question about 2004 Chevrolet Suburban
CHECK WIPER FLUID LEVEL FIRST ALL IS GOOD CHECK FOR POWER AT WIPER WASHER PUMP MOTOR.IF NO POWER AT WIPER WASHER MOTOR.CHECK 15 AMP FUSE IN THE ENGINE COMPARTMENT FUSE RELAY BOX.IF YES YOU ARE GETTING POWER AT WIPER WASHER MOTOR.WIPER WASHER MOTOR FAULTY.
Posted on Dec 31, 2010
I know this is a foolish question.....but you have checked the fluid level in the reservoir, right?
Could be a bad pump motor (located in most instances at the bottom of the reservoir, or it could be that the delivery hoses have cracked, allowing the cleaning fluid to spray out before reaching the nozzle for the windshield. Also could be clogged nozzles, but that isn't as likely as the preceding listed things.
An even less likely culprit could be the inside spray selection switch on the windshield wiper control stalk.
Posted on Dec 31, 2010
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
There are a number of different issues that could cause this.
-The circuit for the wiper should be the same as the washer; same fuse. -I'd suggest trying to run the washer while the hood is open and the engine off. If it runs, you should hear a dull whine.(a 2nd person might be of use to help look and listen)...(find the pump by following the hoses from the wipers to a unit mounted close to the dashboard in the engine compartment)
-If it runs, check to see if any fluid is coming from a hose that might have become disconnected.
-If the pump runs, and if you see no fluid coming from anywhere, and if you can reach the hose connected to the washer pump, pull that hose off the pump. Try running the pump again to see if anything comes out in a good stream.
-If the pump doesn't run at all, check to make sure the connector hasn't come loose.
-If the pump still doesn't run, check to see if you have 12 volts at the connector at the pump. A simple check can be done with an auto bulb connected to the plug at the motor while the pump switch is pushed.
-If you have power at that point, you likely need to replace the pump and motor.(depending upon the age of vehicle & your mechanical abilities...a call to a local wrecking yard is suggested ..atleast to compare the cost vs. new)
hope that helps
Posted on Oct 08, 2008
Try standing outside of the vehicle and having someone press the "juice" button and listen to see if the motor is trying to spray. If it is....check to to see if you have contaminents in the windshield wiper fluid reservoir.
Posted on Mar 11, 2009
The reservoir is the same one for the front washers. There are two electric pumps on the base of the reservoir (one for front and one for rear). You probably need a new pump. It is accessible behind the panel in front of the front right wheel.
Posted on Jan 31, 2009
Can you hear the washer pump running? If not check the plug for it located on the washer fluid bottle. Most likely if you do not hear that pump running the washer fluid pump is probably bad.
Posted on Oct 08, 2010
Tips for a great answer:
Nov 03, 2016 | Cars & Trucks
Jan 18, 2013 | 1986 Buick Century
Dec 30, 2010 | 2004 Honda Element
Oct 08, 2010 | 2001 Chevrolet Blazer
Apr 02, 2010 | 2000 Hyundai Accent
Jul 02, 2017 | 2001 Volkswagen Golf
Dec 17, 2008 | 2003 Honda Civic
2,778 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: