Question about 1993 Mitsubishi 3000GT

1 Answer

We have a 1993 mitsubihi 30000gt.the people we boughtn the car from said it needed a tranny and a coil pack,well we replaced the tranny.with the bad coil we still got it to crank.the next daY WE PUT THE NEW COIL AND NOW ITS TURNING BUT NOT CRANKING

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 360 Answers

If it started with the "bad" coil pack, but won't start with the new one I'd say you got some wires crossed.

Posted on Dec 31, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1993 eagle talon es with 2.0 dohc engine and 5 speed manual transmission there are only 2 cylinders working 1 and 4 are good but 2 and 3 dont work wht can i do


So i think you have 2 ignition coil packs on your car, each one connects to 2 cylinders.
But i dont know what cylinders each one controls, but the coil connected to cylinders
2 and 3 may have gone bad. Thats where i would start. If you check and find out that
one coil pack connects to cylinders 2 and 3, remove the coil packs and switch their positions.

Reconnect the wires and see if then cylinders 2 and 3 work, and 1 and 4 dont. That would tell
you whether that coil pack is bad. Thats seems most likely to me.

Sep 28, 2011 | 1993 Eagle Talon

1 Answer

ENGINE IDLES ROUGH IVE REPLACED THE T.P.S. THE I.A.C. PLUGS AND WIRES THIS PROBLEM STARTED WHILE IT SAT ABOUT 8 MONTHS UNTILL I PUT A NEW TRANNY IN IT IS A 2.4 AND A 3 SPEED AUTO AND IVE NOTICED THE FUEL...


I had this problem with a 2.4 before. my problem ended up being a bad coil pack. Best way to find out if its bad is to check each cyl. for spark if you have one with none replace the coil pack and that should fix the problem

Nov 01, 2010 | 1999 Plymouth Voyager

1 Answer

How to replace the ignition module in a 1993 oldsmobile eighty-eight royale


Find coil pack I think it is on the front passenger side. Disconnect negative battery cable. Remove electrical connector from module. Remove the four or six bolts that fasten the coil pack/module to the motor. Mark location of coil packs before removing from module. Replace in reverse order.

Mar 11, 2010 | 1993 Oldsmobile Eighty Eight

1 Answer

Engine code said spark 1 and 5 bad


you could have bad plugs and wires.clogged fuel injectors.and low compression.leaking intake.this is a list of possible causes for cylinders miss.do a compression test.it will pin point problem quickly.

Jan 04, 2010 | 2002 Dodge Grand Caravan

1 Answer

Cylinder layout and coil pack numbers for 1993


try this. firing order is 1,2,3,4,5,6.dc1ac54.jpg

Jan 01, 2010 | 1993 Pontiac Grand Prix

1 Answer

Where is the ECM located on a 1993 Isuzu Trooper?


If you don't have a coil pack working, unplugging the ECM will do nothing to reset the coil pack. If you have power present at the plug, you need a new coil pack.

Jul 28, 2009 | 1993 Isuzu Trooper

1 Answer

Won't switch gears


Sounds like a speed sensor problem in the transmission, or wiring going to the tranny. You can check the wiring externally, but would need a computer to find out what is going on internally.

Jun 09, 2009 | 1993 Chrysler Concorde

1 Answer

Car runs but jumps while driving


Take your coil packs off as well as your module whch is on the bottom of your coil pack (4 bolts 8mm)and take them down to your nearest AutoZone and they will test them for free...one of the coil packs could be bad, but just as well test the module while you are at it.

Jan 25, 2009 | 1991 Saturn SL1

Not finding what you are looking for?
1993 Mitsubishi 3000GT Logo

Related Topics:

95 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...