Question about 2007 Ford Crown Victoria LX Sedan

1 Answer

Car will not start while the car is in park. - 2007 Ford Crown Victoria LX Sedan

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 65 Answers

If it won't start in park but you can start it in nuteral it could be the park nuteral switch on the tranny

Posted on Dec 31, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 1996 Mazda Mx6 is showing reverse on the icon when my car is in park. I am not able to start the car all power in the car works though. What can I do to figure out the issue?


Are you sure it's in park did you try pushing the car the shifter cable most likely streched so it's not going all the way in park there is a neutral safty switch that only allows the car to start in park and neutral try holding the shifter into park while trying to start the car

Nov 27, 2014 | Cars & Trucks

1 Answer

My car will not go into park


honestly its something you have to take to a mechanic. it can be something along the lines of the shift lever not syncing with the gears its suppose to be put in.

just because the "P" is highlighted doesnt mean the car is in park it could still be in reverse. that would mean your gear shift lever is broken and need to take it to a mechanic to fix it or replace it.

Sep 19, 2012 | 2001 Dodge Intrepid

1 Answer

Elantra won't start and moves when it's in park


I'm going to say something happened to the cable between the shifter and the transmission. There is a switch on the transmission that prevents you from starting the engine in anything other than park or neutral. The transmission is probably in reverse or drive which would allow it to roll.
Someone would need to check the lever on the trans where the shift cable is attached.

Sep 17, 2012 | 2006 Hyundai Elantra

2 Answers

Adjusting the parking brake on a MiTSubichi ENDEAVOUR 2005


If your parking brake is too loose or is not properly adjusted, you may encounter problems while parking, positioning and driving your car. Most of the time, car owners would send their car to a mechanic in order to fix and tighten the parking brake. However, you can actually skip this step and adjust your parking brake yourself. When your car starts to slip on a hill in its park position, you need to start tightening the parking brake.1 Remove the car's center console cover placed around your parking brake level inside your car. This is found between the seat of the driver and the front passenger.2 Use your wrench to turn its adjuster nut found at the end of your parking brake's cable rod. Loosen the adjuster nut with your wrench, while making sure that it does not come off at your parking brake cable rod's end.3 Raise your car rear wheels using your jack, and use your jack stands to support both its rear wheels.4 Pull up your parking brake handle up to two clicks or notches. Tighten your adjuster nut until you feel a slight resistance on your rear wheels whenever you spin them.5 Release your parking brake lever. Check and make sure that your rear wheels are still able to spin freely and without any resistance.6 Pull up on your parking brake lever up to three to five clicks or notches, while making sure that your car's rear wheels are not turning at all.7 Lower the car by adjusting your jack, and remove your jack stands from your car's rear wheels.

Oct 03, 2011 | 2005 Mitsubishi Endeavor

2 Answers

While in park,the car will not start.If I place the car in neutral,the car will start every time.Why is that.


There is a switch that only allows your car to start in park or neutral. It must just be worn out in park. It is perfectly fine to start it in neutral. Just keep your foot on the brake. My buddy did that in his monte carlo for 10 years.

Jun 18, 2011 | 1994 Oldsmobile Cutlass Ciera

2 Answers

S430/102k, mi/ Wouldn't start. Told to put car in neutural and 'rock it' 'Rocked' car, put it in park and car started and 'check engine light lit'Prior to the no start, wife...


Car not starting or turning over indicates towards multiple possibilities. It can be issue with battery or weak battery. But if battery checks out ok, then it can be starter issue or faulty alternator or problem with low fuel pressure or no spark at spark plugs due to dirty spark plugs or faulty ignition coil or injectors getting cracked or dirty and needs to be cleaned.


To confirm the problem, the basic troubleshooting is required.


Click this link below and follow the troubleshooting:------

http://technoanswers.blogspot.in/2012/02/car-starting-issues.html

---------

This will help.

Thanks

May 18, 2011 | Mercedes-Benz S-Class Cars & Trucks

1 Answer

Car is in park on incline, and will not start.


There is a neutral safety switch to make sure car is neutral.If that switch went bad or becase your parked on incline the switch is not made up because car rolled back when you put it in park.If you can depending on the situation,put key in ignition,turn key till one click before it starts,apply emergency brake,depress regular brakes and shift car from park to drive then back to park.then turn off key and restart.If for some reason you try to shift out of park and it wont move you need to roll car a little forward or backward(have someone else do the pushing and be carefull not to put anyone in a pinch point between another car if this car is parked between two cars)With older cars this is usally the case.If this fixes your problem i would have a mechanic change switch because this will probrobly happen again.Be carefull.......

Feb 06, 2011 | 1996 Cadillac Seville CA Value

1 Answer

Car is difficult to get into park and once in park, won't start and can roll as if in nuetral


sounds like a broken parking pin in the tranny, car wont start because it has to be in park or nuteral to start it, put it in nutrual i bet it wll fire right up, with that pin broke there is nothing to keep the car from rolling so even though it looks like park from the shifers point, there is nothing holding it from rolling

Mar 19, 2010 | Chevrolet Impala Cars & Trucks

1 Answer

The car dont want to start at the park position.but at the neutral position the car start.


Your neutral saftey switch is broken. This is the switch that ensures the car is either in park or neutral when you start it. The switch for the park is worn out.

Apr 05, 2009 | 2005 Dodge Neon

1 Answer

Car will NOT start in park but will start in neutral


It sounds like you new switch needs adjusted just a little bit.

Feb 25, 2009 | 2000 Dodge Durango

Not finding what you are looking for?
2007 Ford Crown Victoria LX Sedan Logo

Related Topics:

61 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...