Question about 1999 Oldsmobile Intrigue

1 Answer

Service engine light stays on.....station said it meant cylcinder 6 is misfiring.????? What is the fix for that?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,486 Answers

Station should have checked cylinder 6 plug and ht lead.anyway change them your self if you can quit an easy task..

Posted on Dec 30, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Blinking service engine light


Gas cap install wrong , remove and replace gas cap. It will take a wile for light to go out.

Apr 22, 2014 | 1998 Buick Riviera

1 Answer

Ford 2003 escape codes readed


Cauases or fault codes are not cut and dry, but here are the possible causes of codes P0316 and P0306 which are related codes.
P0316 - Engine Misfire Detected on Startup
Symptoms - Engine Light ON (or Service Engine Soon Warning Light)
- Engine fails to start
- Engine runs rough Possible causes - Crankshaft Position (CKP) sensor harness is open or shorted
- Crankshaft Position (CKP) sensor circuit poor electrical connection
- Faulty Crankshaft Position (CKP)
- Ignition System
- Fuel Injectors
- Running out of fuel
- Fuel Quality
- Faulty Engine Control Module (ECM) P0306 - Cylinder 6 Misfire Detected Symptoms - Engine Light ON (or Service Engine Soon Warning Light)
- Lack/loss of power
- Hard start
- Engine hesitation
Possible causes - Faulty spark plug 6
- Faulty ignition coil 6
- Ignition coil 6 harness is open or shorted
- Ignition coil 6 poor electrical connection
- Clogged or faulty fuel injector 6
- Injector 6 harness is open or shorted
- Injector 6 poor electrical connection
- Improper spark plug 6
- Insufficient cylinder 6 compression
- Incorrect fuel pressure
- Intake air leak

Jan 17, 2012 | Cars & Trucks

1 Answer

Ok my chevy metro lsi is misfiring not sure which cylinder but it is misfiring and causing the service engine light to stay on how do i fix this


Possible bad plug, if coated with oil, then you might have other issues there. the engine light goes on cause the not firing cylinder is making your oxygen sensosr kick the light on.
Have plug, wires, and coil checked, replace as needed.

Aug 23, 2011 | Chevrolet Metro Cars & Trucks

2 Answers

Check engine light is on, they say multiple miss fire in cylcinder 6. but no one can find the problem van runs great


first do a cylinder compression test on engine to verify good engine compression this should be around 110psi to 175 psi check for vacuum leak, intake port for #6 cylindermay be leaking air, or also check coil for that cylinder, if wire and spark plug have already been changed, last replace fuel injector for that cylinder.

Jan 24, 2011 | 1996 Dodge Caravan

2 Answers

2002 ford escape 3.0L DTC P0305and P0306 what would you ck


P0305 - Cylinder 5 Misfire Detected
P0306 - Cylinder 6 Misfire Detected

When a misfire occurs, engine speed will fluctuate. If the engine speed fluctuates enough to cause the Crankshaft Position (CKP) sensor signal to vary, The Powertrain Control Module (PCM) or Electronic Control Module (ECM) can determine that a misfire is occurring.

When is the code detected?
- Engine Cylinder #5 and #6 is Misfiring.

Symptoms:
- Engine Light ON (or Service Engine Soon Warning Light)
- Lack/loss of power
- Hard start
- Engine hesitation

Possible Causes:
- Improper spark plug at cylinder #5 and #6
- Insufficient compression at cylinder #5 and #6
- Incorrect fuel pressure
- The injector circuit is open or shorted at cylinder #5 and #6
- Fuel injector #5 and #6 may be faulty
- Intake air leak at cyli

Possible Solution:
- Perform Injector Service
- Replaced Spark Plug #5 and #6
- Replaced Injector #5 and #6
- Replaced Ignition Coil #5 and #6

Hope helps.

Jan 02, 2011 | Ford Escape Cars & Trucks

1 Answer

The service engine light stays on and this is what the station said the code read......misfire on cyclinder 6.


your missing some important info needed to help, but here it goes.
3.8 v6 engine, have problems with the control module, and all three coil packs. I would replace all of these and the plugs and wires also.

Dec 30, 2010 | Oldsmobile Intrigue Cars & Trucks

1 Answer

Have a 2002 Chevy Silverado 5.3 4wd. having engin hesitation problems.... service engine light came on...... Changed plugs (Autolite .040 gap) and wires. Problem continued, got worse Had auto parts...


Try swapping the injector on that cylinder with the one next to it and see if the misfire changes to the other cylinder.If it does then you have a plugged or bad injector.It it still stays on that same cylinder then check compression on the number 6 cylinder.Let me know what you find out.Good luck.

Aug 18, 2010 | Chevrolet Silverado 1500 Cars & Trucks

1 Answer

Misfire, 2002 3.4 l, V-6, Grand Am, only after sitting out in sun


i would check wiring at injector 6 for a bad contact if ok test injector

Jun 22, 2009 | 2002 Pontiac Grand Am

1 Answer

76 P0306 Misfire Cyl. 6 Or Random Misfire


hi my name is mark, to reset that all you do is pull positve cable off battery and that will reset the ecm. you might check your plug wires for loose connections.

Mar 16, 2009 | 1998 Honda Civic

Not finding what you are looking for?
1999 Oldsmobile Intrigue Logo

149 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8266 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...