Question about Chevrolet Venture

1 Answer

I need to know the location of the EGR valve on a 2001 Chevrolet Venture

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 870 Answers

It should be on drivers side on top of the motor near the rear the Transaxle dipstick Tube. Good luck


Posted on Dec 30, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace exhaust gas recirculation valve


Betty, Check the attached EGR links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Exhaust Gas Recirculation Valve EGR Checking
Faulty EGR Valve Symptoms and EGR Valve Cleaning
EGR Valve Replacement Chevy Venture 3 4L Engine
Installing New EGR Valve


Mar 08, 2016 | 2003 Pontiac Aztek

1 Answer

Location of the torque converter clutch silonoid on a 2001 chevy venture


TORQUE CONVERTER CLUTCH SOLENOID IN THE SIDE PAN OF THE TRANSMISSION. IN THE VALVE BODY.YOU NEED A VALVE BODY DIAGRAM.YOU HAVE MORE THAN ONE SOLENOID IN TRANSMISSION VALVE BODY. GET THE CHEVROLET DEALERSHIP PARTS DEPARTMENT SALESPERSON SHOW YOU DIAGRAM ON HIS COMPUTER THAT WAY IT WILL GIVE YOU IDEA ITS LOCATION ON THE VALVE BODY.

Jan 10, 2011 | 2001 Chevrolet Venture

1 Answer

How do you clean EGR valve in a 2003 Chevrolet Venture


Just go to the auto parts store and buy a new one. Only if you know it failed.

Sep 19, 2010 | 2003 Chevrolet Venture Passanger

2 Answers

To clean the EGR valve


It's PITA, the EGR valve is located on the back side of engine (Firewall side) You might want to try using Deep Creep from Seafoam to get your upper intake manifold and EGR valve cleaned without removing it. Here is a link to the Seafoam products and it's worth a try first before you go through the pain of removing the EGR valve on your Ventura.
Thank you for using fixya and good luck
http://www.seafoamsales.com/

Jun 03, 2010 | 2000 Chevrolet Venture

2 Answers

I replaced my egr valve on my 2001 chevy venture 1 1/2 yrs ago,


I found an answer that worked for me here. (I have a 2001 Chevy Venture.) http://www.fixya.com/cars/t4093012-code_p1404_dodge_ram_1500_meanIn case links are not allowed, here's the text:That code is the EGR. I'd start by checking for a bad connection on the EGR plug-in. Pull the connector off and inspect each individual terminal inside the plug and the connector pins inside the EGR valve.
I found this solution at another forum on this issue. It worked on my 2001 Grand Am:

"Many GM built cars have a tendency to have the 'Check Engine Soon' light come on as a result of DTC code P1404. P1404 is described as EGR valve pintle stuck open, which in most cases is a false alarm. I had this happen with my '01 Grand Am. A little bit surfing on internet reveals that GM has a solution for the problem, a re-flash for the car's computer.

A software re-flash as a fix kind of indicates that the vehicles with this problem were built with it but I don't think GM will be re-flashing cars outside warranty for free. They will want their $100 for it.

Some hands on people I found had purchased a new EGR valve and changed it but the problem remained.

Possible reason (very likely) for the false P1404 code is that the plastic piston of the EGR valve position instrument (LVDT?) wears over time and starts reading a different position at valve closed than what it was when the EGR valve was first installed.

When the car was built and the computer circuits energized for the first time the computer learned the EGR valve closed position signal from the valve position instrument that is built on top of the valve itself. Over time, when the instrument wears, a slightly different signal is sent to the computer and when it differs enough from the 'Valve Closed Signal', that the computer had learned, the trouble code P1404 is set and the 'Service Engine Soon' light comes on.

Replacing the EGR valve with a new one does not necessarily fix this problem because the 'Valve Closed Signal' between valves is slightly different and it is just pure luck if your new valve would give a 'Valve Closed Signal' close enough to your original valve's signal not to set the trouble code. This is why the new EGR valve 'Valve Closed Signal' must be re-learned by the computer.

So, what this all means is that if the P1404 is a false code meaning that the valve pintle is not stuck open, then new 'Valve Closed Signal' can be re-learned by the computer using the old valve.

For fixing this problem the tool you need to have is a simple OBD II code scanner that can be used to erase trouble codes. There are many scanners of different price range on the market. I purchased one from AutoZone for about $90.

A code scanner is a very handy tool to have and I recommend everybody who is just slightly hands on type of a person to get one. It will end up saving a lot of money over time.

The fix goes like this:

1. Disconnect the wire harness from the EGR valve.

2. Turn key ON and erase the trouble code(s) from the car's computer AND TURN KEY OFF IMMEDIATELY WHEN THE SCANNER SAYS CODES HAVE BEEN ERASED. DO NOT TURN KEY ON BEFORE YOU RE-CONNECT EGR WIRE HARNESS.

3. Re-connect EGR wire harness and your problem should be fixed.

Mar 27, 2009 | 2001 Chevrolet Venture

1 Answer

Getting to the egr valve 2001 chevy venture to change out


Try “autozone.com” or your local library for diagrams and step by step instructions.

Mar 08, 2009 | 1997 Chevrolet Venture

1 Answer

WHERE DO I LOCATE THE EGR VALVE ON MY 2001 CHEVY IMPALA 3.8 V6


The egr valve is located at the end of a hose that plugs into youe valve cover. It is pushed right into a rubber grommet that is located in one of the valve covers. I hope this helps. don.t forget to rate my nswer, thanks

Feb 27, 2009 | 2001 Chevrolet Impala

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...