Question about 2002 Ford Explorer

1 Answer

What is the 755 code on the 2002 ford explorer. Diagnostics.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 1,915 Answers

It could be a failing shift solenoid, the shift solenoids are in the valve body. You would need to remove the pan of the transmission, drain the fluid and replace that particular solenoid, but that may not be the only problem with it. It could be the the wiring harness inside the tranny or several other things that would set that code. You shoukd have it checked out soon. The more you drive it with a problem the more it could cost you, because you could be damaging more parts inside of the tranny like clutches, drums and band.

Posted on Dec 30, 2010

Testimonial: "Great help. Had no clue what I was even dealing with. Didn't drive the truck since the lite came on. "

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

2002 ford escape shuts down while driving.

The very first thing you need to do is perform a fault code test. Once you have the fault code or codes you do the proper diagnostics for the codes.

Jun 21, 2016 | 2002 Ford Escape

1 Answer

2002 ford explorer od light gets flashing and i loss power

The flashing light means there is a system problem with the automatic transmission. You will probably notice a lack of power when starting from a stop with this lamp flashing. The dealer or local mechanic should be able to scan for a fault code.

Apr 19, 2014 | 2002 Ford Explorer

1 Answer

I have a 2002 Ford Explorer and I don't know the keyless entry code. I need to know how to reset it

Have you tried getting a hold of the ford dealership they helped me when i called them

Oct 04, 2012 | 1999 Ford Expedition

1 Answer

Does a 2002 ford explorer engine with a balance shaft timing chain mean that it's a 4x4

No. 2wd 2002 Explorers have balance shafts except for engine codes 2G-960-aa and 2G-964-aa

Mar 26, 2012 | 2002 Ford Explorer

1 Answer

I have a 2003 Ford Explorer the o/d light is blinking. I had diagnosis tested ran and came up with PO73 invorrect gear 3 ratio, PO745 Pressure control solenoid malfunction and PO745 Pressure control...

Error Code P0745
  • If the error code checker returns a P0745 code, it is indicative of a transmission issue. Error codes in the 700s refer to transmission problems. The P0745 error code refers specifically to a malfunctioning pressure control solenoid. This should be checked by a mechanic as soon as possible.

  • Read more: Ford 2002 Explorer Error Codes '

    Feb 27, 2011 | 2003 Ford Explorer

    2 Answers

    2002 ford explorer xlt , need the radio code and a way to reset the radio?

    From Google ..Exemple Download Ford Explorer 2002 universal code for Radio Setting

    Oct 07, 2010 | 2002 Ford Explorer

    2 Answers

    2002 Ford Explorer Engin Code P1131 Put new O2 sencor in still getting code

    their are two sensors ,one before the cat and one after the cat

    Mar 17, 2010 | 2002 Ford Explorer

    1 Answer

    2002 Ford Exlorer XLT

    That year Explorer was notorius for rear ABS sensors going bad. If your ABS light is on as well this may be your problem. Also they were notorious for 4WD modules going bad. This problem is more expensive. I would advise you to have it checked on a computer to see what codes you have.

    Apr 05, 2009 | 2002 Ford Explorer

    1 Answer

    2002 ford explorer

    Have you had the system checked and the codes pulled? If so and nothing was found,you can bypass each alarm trigger one at a time. If you have the patience, do this yourself and park the car where it happens. If the alarm stopsgoing off wrong,you have found the trigger and/or circuit setting it off. Sometimes this is what it takes because the system is operating in it's parameters and will not set a code? Good Luck.

    Aug 03, 2008 | 2002 Ford Explorer

    Not finding what you are looking for?
    2002 Ford Explorer Logo

    261 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Ford Experts


    Level 3 Expert

    75807 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22133 Answers


    Level 3 Expert

    5495 Answers

    Are you a Ford Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides