Question about 2000 Plymouth Grand Voyager

1 Answer

How to replace an alternator on a plymouth grand voyager

Posted by Anonymous on


1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 1 Answer

Well what kind of engine you have? on 3.0L the alternator is at the front right side of the engine on the top. there are two bolts to remove one you can see just by looking at it but the other one is in the back and you cant see it. just feel with your hand where is it and you socket n rachet and remove it and disconnect the wire that are connected to the alternator. CAUTION: before you remove the bolts take the belt off by turning the belt tensioner clockwise. hope it helps.

Posted on Dec 30, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Low voltage check gages

88 Plymouth Voyager had a voltage regulator built into the power control module... PCM... these go bad and to rectify this issue you have two choices... buy a new PCM or take your vehicle to a specialty alternator/starter shop (a GOOD one) and have the voltage regulator built back into the system... there is a kit for this... can you do it. maybe

Nov 02, 2014 | 1988 Plymouth Grand Voyager

1 Answer

1996 Plymouth Grand Voyager (3.3L) dies while driving. Changed water pump, ignition switch, and battery. Most times have to get it jumped off, which usually works. Any ideas?

have the alternator bench tested for correct out put. Check the drive belt tension as the alternator may be slipping under load

Dec 12, 2013 | 1997 Plymouth Grand Voyager

1 Answer

1998 plymouth grand voyager adjusting alternator charging level

Good alternator should charge 14.5+V.How old is battery,older getting weaker.

Apr 24, 2013 | 1998 Plymouth Voyager

1 Answer

Belt squealing on a 1998 plymouth grand voyager 3.3 liter motor

have u checked the dampner pulley,it may b coming apart. if it only squeaks with the a/c on then it's your a/c clutch pulley.

Dec 04, 2011 | 1998 Plymouth Grand Voyager

2 Answers

Overcharging alternator is killing my battery. is the voltage regulator in the computer? 1992 plymouth grand voyager 3.3 v6

This year it is not supposed to be in the computer,look on the firewall in the middle,I believe it is flat,and has a three wire connector,but only two wires in the plug,see if you can find it.

Feb 26, 2010 | 1992 Plymouth Grand Voyager

1 Answer


I have a '94 3.8 eng and I believe the method is the same. It must be removed from down under the vehicle. Jack up the car and place on jack stands. You'll have to twist and turn a bit but that is the only way I know of how to replace.

Apr 14, 2009 | 1994 Plymouth Grand Voyager

Not finding what you are looking for?
2000 Plymouth Grand Voyager Logo

342 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts


Level 3 Expert

79186 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides