Question about 2004 Dodge Ram 2500

1 Answer

2003 dodge cummins had to start runs great when started. i changed the lift pump/cp3 pump/2 injectors and cam sensor still have starting problems.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 158 Answers

Does the truck have any active codes, what is the fuel rail pressure getting up to while cranking, why did you replace the 2 injectors, why did you not put all six in? did you do this yourself, did you follow the correct procedure and properly torque everything. these engines are very sensitive to proper torque on fuel components.

Posted on Jan 12, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2001 dodge 5.9 cummins quit going down the road check engine light came on it cranks over but won't start


sounds like a injector pump to me had a 99 dodge cummins went through three of them in 350000 miles done just like you are describing.

Aug 21, 2012 | Cars & Trucks

1 Answer

We have a 2000 dodge 24 valve 5.9 cummins pickup. it has a PO216 code. it has had 3 new injection pumps, new lift pump that should have taken care of that code. It has had a cam shaft censor replaced and...


The problem is the wires on the back of the lift pump. somewhere along the line there is a bad connection. typically at the back of the lift pump. if they get corroded sometimes they'll work and others it'll run poorly. Replacing the pigtail would be cheap, easy and do it yourself. Start there and you should have it solved in no time.

Oct 11, 2010 | Dodge Ram 2500 Cars & Trucks

2 Answers

Have a 2001 Ford F-350 Super Duty 7.3 L Diesel... with a 30 HP Ford chip. Truck started having "hiccups", like it wanted to cut out and quit running. Took to have cam shaft censor replaced on a recall...


Have you tried removing the chip, reseting the pcm, then test drive without the chip, I do not work on diesels but I know I have had some 5.0s with compatibility problems with performance chips, for some reason on select cars the emissions system would through a fit and make the car run like crud with the chip in ran fine with it out although they accused it ran fine for a few months with the chip. if you havent you might try this just to see

Mar 27, 2010 | 2001 Ford F350 Super Duty SuperCab

1 Answer

Starting problem


check for fault codes in both engine controllers..may have a camshaft or crankshaft position sensor fault

May 10, 2009 | 1999 Dodge Ram 2500 4WD

5 Answers

Dodge cummins won't start, fuel reaching injector pump but no fuel coming out of injector pump.


You said you have fuel flowing from the inlet line of the injection pump? But not at the injector lines?

May 05, 2009 | 1999 Dodge Ram

4 Answers

2004 dodge ram 2500 5.9 diesel hard to start


The lift pump is bad Check the fuel pressure with a test gauge.

Jan 04, 2009 | 2004 Dodge Ram 2500

3 Answers

Ran out of diesel on a 2002 dodge ram 2500 cummins...need to know how to bleed the system


just bump the ignition without starting it let sit for 20 seconds oruntill you hear lift pump shut off then shut off ignition and repeat do it 2 or 3 times should start then cummins is a self priming system has been for years even in semi trucks

Aug 10, 2008 | 2001 Dodge Ram 2500 Truck

Not finding what you are looking for?
Cars & Trucks Logo

241 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8516 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...