Question about 1996 Ford Ranger SuperCab

1 Answer

Fuel pump pressure wont start ran it out of fuel hav spark installed new fuel pump new plugs

Posted by Anonymous on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,486 Answers

You have picked up the sediment from the bottom of the tank causing a blockage in the pickup pipe in the tank.Remove and clean out the pipe.

Posted on Dec 30, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a 1987 ford ranger the engine turns over but it wont start


Spark at plugs? Fuel filter? Pressure on injector delivery line? Pressure relief valve? You may be able to measure fuel pressure at the pressure relief valve location. and return line. If you have spark, I'd say it's a fuel supply problem

Dec 21, 2014 | Ford Cars & Trucks

1 Answer

92 kodiak wont start


well no fuel pressure most likely bad fuel pump so if i were you would get new fuel pump new fuel lines new fuel injectors that covers your fuel problem then with no spark most likey a bad distributor so get a new distributor and to make sure i would get new ignition coil and spark plug wires and spark plugs

Nov 25, 2012 | Cars & Trucks

1 Answer

95 chevy corsica wont start. it ran fine the night before but now it turns but wont start.


As with any no start issue, you need to figure out if you are dealing with a no fuel or no spark problem to proceed.
The pump could have failed, or the filter in the tank could be plugged up.
I would make sure it has spark at the plugs and then check fuel pressure with a gauge.

Sep 20, 2012 | 1995 Chevrolet Corsica

1 Answer

2001 ranger wont start new fuel pump installed what do i do?


Have you checked the relay to see if the pump is getting voltage ?
If the pump is running, did you change the filter ?
Have you checked for fuel pressure at the injectors ?
Are you getting spark to the plugs ?

Jul 23, 2012 | 2001 Ford Ranger Regular Cab

1 Answer

1989 Bronco fullsize has sat for the past 6 years and wont start, will turn over, has new gas with fuel stabilizer, still no firing. Replacing spark plugs and the fuel pump are the next two steps. ...


Assuming she ran good before she sat, replacing the plugs, cap and rotor isn't a bad idea.Step 1: Make sure you have good spark. No need to worry about timing right now. Step 2: If you have spark, then we have to see if its getting gas. There are two fuel pumps on this Bronco. One in tank and one on the frame rail. Can you hear either one running? The in tank one should come on for a few minutes and shut off. The front one is harder to hear.If you hear it, borrow or rent a FUEL PRESSURE GAUGE and check your fuel pressure. There is a fitting similar to a tire valve on fuel rail. Pressure should remain constant.If either pump fails you will not get adequate fuel flow. The front pump is easy to get to for trouble-shooting. Don't buy anything unless your sure you will need it. Hope this helps.

Feb 07, 2011 | 1989 Ford Bronco II

1 Answer

Installed new fuel pump you can hear it run but blazer wont start


So why did you replace the pump in the first place. What is the fuel pressure? what should the fuel pressure be? Do you have spark at the coil? do you have spark at the spark plugs?

Sep 10, 2010 | 2002 Chevrolet Blazer

1 Answer

My 2000 chevy S10 wont start I changed the battery and it ran fine for 2 days now it will turn over but won't start


Check Fuel Pressure. First turn key to on position (without starting) and listen for the fuel pump motor. If no motor sound, your fuel pump is not working. Check fuel pump fuse and relay. If fuel pump works, check for pressure at the fuel rail (schrader valve on fuel rail for pressure testing). If no pressure, or not enough, fuel filter might be clogged or fuel pressure regulator may not be working properly. IF fuel is not the problem, start checking electrical, such as ignition control and proper spark to plugs.

Aug 14, 2010 | 2000 Chevrolet S-10

1 Answer

New fuel pump and still wont start


1 Inspect Battery Battery Discharged or Faulty. 2 Inspect Battery Cable Corroded, Broken, Shorted or Poorly Connected Battery Cable. 3 Inspect Distributor Cap Distributor Cap Cracked or Burned. 3 Inspect Fuel Filter Clogged or Dirty Fuel Filter. 5 Inspect Coil - Ignition Faulty Ignition Coil. 6 Inspect Wireset Worn, Damaged or Faulty Spark Plug Wire(s). 7 Inspect Spark Plug Incorrectly Gapped or Fouled Spark Plug(s). 8 Inspect Starter Starter Motor Faulty. 9 Inspect Fuel Pump Low Fuel Pressure. 10 Inspect Solenoid Switch Faulty Starter Solenoid Switch. 11 Inspect Relay - Fuel Pumpat Faulty Fuel Pump Relay. 12 Inspect Fuel Injector Pressure Regulator Faulty Fuel Injector Pressure Regulator. 13 Inspect Ignition Switch Improperly Connected or Faulty Ignition Switch. 14 Inspect Starter Drive Faulty Starter Drive. 15 Inspect Fuel Injector Dirty or Worn Fuel Injectors. 16 Inspect Fuel Pump Strainer Clogged or Dirty Fuel Pump Strainerat. 17 Inspect Engine Control Computer Incorrect Operating Information Being Delivered and Sent From The EEC. 18 Inspect Fuel Tank Fuel Tank Empty. 19 Inspect Carburetor Carburetor Flooded or Faulty Choke. 20 Inspect Distributor Worn, Loose, or Incorrectly Installed Distributor.

May 22, 2010 | 2000 Dodge Caravan

1 Answer

98 chevy camaro wont start


check fuel pressure regulator

Dec 06, 2008 | 1998 Chevrolet Camaro

Not finding what you are looking for?
1996 Ford Ranger SuperCab Logo

106 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...