Question about 1999 Ford Explorer

1 Answer

WHICH CYLINDER IS THE #3 CYLINDER - 1999 Ford Explorer

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 3,113 Answers

All Ford engines follow the same cylinder numbering system. While facing the front of a V8, starting on your left, the cylinder closest to the fan is number 1. cylinders 2, 3 and 4 follow in order. On the right side, cylinder 5 is closest to the fan and the remainder follow in order. V6 engines follow the same pattern, with only 6 cylinders.


Posted on Dec 30, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2011 mini convertible misfire. Started with P300 and P301. Changed engine coil for cylinder 1 and all four plugs. Same issue now with P300,P303 &P304. Thoughts as to what to tackle next?


Do the following take coil from cylinder 3 put in cylinder 1, take coil from 4 put in cylinder 2, put coil from cylinder 1 into cylinder 3, put coil from cylinder 2 into cylinder 4, reset computer, drive vehicle if you get codes for cylinder 1 and 2 replace coils

Jun 26, 2016 | Mini Cars & Trucks

1 Answer

How much is the engine head of Mazda 3 1.6 2007 16 v


Mazda 3 Cylinder Head ' eBay

www.ebay.com/bhp/mazda-3-cylinder-head
eBayEngine Cylinder Head Bolt Set Fel-Pro ES 72207 (Fits: Mazda 3) ... 2.0l & 2.3l dohc l416v, w/ turbo, "duratec" 2004 - 2009 mazda 3 2.3l dohc l4 16v. 2007 - 2009 ... #O608 RIGHT CYLINDER HEAD 2007 MAZDA3 2.0 MANUAL 4683894AC.

Oct 29, 2015 | Mazda Cars & Trucks

1 Answer

Misfire on Cylinder 3 swapped plugs between 3 and 4 on Pontiak Aztek 2003. Misfire remained on cylinder 3. Swapped ignition coil 3 and 6 with ignition coil 1 and 4 misfire still on cylinder 3


Try a new plug wire on cyl 3 if that doesn't fix it you could have a bad valve or compression problem on cyl 3 Try doing a compression test also If it has injectors for each cylinder you could have a bad injector for cylinder number 3

Dec 04, 2014 | 2001 Pontiac Aztek

1 Answer

I have a ford ranger 2.3. Cylinder 3 misfires obd tester reads code 303?


Trouble Code: P0303

Cylinder Number 3 Misfire Detected

Possible Causes:


Air leak in the intake manifold, or in the EGR or PCM systemBase engine mechanical problem that affects only Cylinder 3Fuel delivery component problem that affects only Cylinder 3 (i.e., a contaminated, dirty or sticking fuel injector)Ignition system problem (coil, plug) that affects only Cylinder 3

Dec 23, 2012 | Cars & Trucks

1 Answer

Mazda 2002 MPV cylinder 3 missfire


was the any oil on the coil boot? you can have a weak injector or a stuck vavle

Oct 31, 2012 | 2002 Mazda MPV

1 Answer

Coil pack 1999 discovery land rover ll


Hi there:

Cylinders (front to rear) -
Left bank 1-3-5-7
Right bank 2-4-6-8

(right side coil pack)
Position 1=cylinder 6
Position 2=cylinder 4
Position 3=cylinder 7
Position 4=cylinder 1
(Left side coil pack)
Position 1=cylinder 3
Position 2=cylinder 5
Position 3=cylinder 8
Position 4=cylinder 2


7_24_2012_1_06_18_am.gif


Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Jul 20, 2012 | 1999 Land Rover Range Rover

1 Answer

What is a cylinder 3 misfire


CYLINDER 3 MISFIRING. MEANS NOT FIRING .CYLINDER 3 IS MISSING FIRE.COULD BE FAULTY OR DIRTY FUEL INJECTOR.YOU COULD HAVE BAD SPARK PLUG OR COIL AND WIRE.CLEAN FUEL INJECTORS CHANGE PLUGS AND COIL TO NUMBER 3 CYLINDER .WHEN YOU DO A LITTLE TUNE UP.THAT WAY YOU WILL KNOW IF YOU HAVE A MECHANICAL PROBLEM TO 3 CYLINDER LIKE LOW COMPRESSION.LEAKING INTAKE AT 3 CYLINDER OR BURNED OUT VALVE.

Feb 20, 2011 | 2000 Saturn SL

1 Answer

How do i replace a ignition switch for a 1992 mercury sable


The ignition switch on Mercury Sable is integrated into the ignition cylinder. When this switch fails, you may need to purchase a special switch from a Ford dealership if the switch used a wireless transponder.


Instructions for NON Functional Cylinder (Cylinder will Not Turn or No Keys ):
1. Disconnect the negative battery cable.
2. Remove the steering wheel.
3. Using locking pliers, twist the cylinder cap until it separates from the lock cylinder.
4. Using a 3/8 in. (10mm) diameter drill bit, drill down the middle of the ignition lock key slot approximately 13/4 in. (44mm) until the lock cylinder releases from its breakaway base. Remove the lock cylinder and drill shavings from the lock cylinder housing.
5. Remove the retainer, washer, ignition switch and actuator. Thoroughly clean all drill shavings and other foreign materials from the casting.
6. Inspect the lock cylinder housing for damage from the removal operation. If the housing is damaged, it must be replaced.

To install:
1. Replace the lock cylinder housing, if damaged.
2. Install the actuator and ignition switch.
3. Install the trim and electrical parts.
4. Install the ignition lock cylinder.
5. Install the steering wheel.
6. Connect the negative battery cable, then check the lock cylinder operation.


Instructions for Functional Cylinder ( Cylinder will Turn with Key):
1. Disconnect the negative battery cable.
2. Turn the lock cylinder key to the RUN position.
3. Using a 1/8 in. (3mm) diameter wire pin or a small drift, depress the lock cylinder retaining pin through the access hole in the upper steering column shroud (under the ignition lock cylinder) while pulling out on the lock cylinder. Remove the lock cylinder from the column.

To install:
1. Install the lock cylinder by turning it to the RUN position and depressing the retaining pin. Insert the lock cylinder into its housing. Make sure the cylinder is fully seated and aligned in the interlocking washer before turning the key to the OFF position. This will permit the cylinder retaining pin to extend into the cylinder housing.
2. Rotate the lock cylinder using the lock cylinder key, to ensure correct mechanical operation in all positions.
3. Connect the negative battery cable.


Door Lock:
When a lock cylinder must be replaced, replace both sides as a set to avoid carrying an extra set of keys.
1. Remove the door trim panel and watershield.
2. Remove the clip attaching the lock cylinder rod to the lock cylinder.
3. Pry the lock cylinder out of the slot in the door.


To install:
1. Work the lock cylinder assembly into the outer door panel.
2. Install the cylinder retainer into the slot and push the retainer onto the lock cylinder.
3. Connect the lock cylinder rod to the lock cylinder and install the clip. Lock and unlock the door to check for proper operation.
4. Install the watershield and door trim panel


Hope this helps.

Feb 15, 2011 | 1992 Mercury Sable

1 Answer

2005 Chevrolet Silverado 1500HD 6.0 motor. I am getting a misfire code on ignition coil "D". Which coil pak is coil "D"?


Coil "D" should be Cylinder #4
Coil "A" = Cylinder #1
Coil "B" = Cylinder #2
Coil "C" = Cylinder #3.
Coil "D" = Cylinder #4
Coil "E" = Cylinder #5
Coil "F" = Cylinder #6
Coil "G" = Cylinder #7
Coil "H" = Cylinder #8

Firing Order for 6.0L
1-8-7-2-6-5-4-3
Cylinders:
(back of vehicle)
8----------7
6----------5
4----------3
2----------1
Ignition Coils are adjacent to the corresponding Cylinder

Let me know if this helped.

Feb 26, 2010 | 2002 Chevrolet Silverado 1500HD

3 Answers

Where is #2 cylinder on 2000 jaguar s type 4.0?And what is code p0302


I recently starting having this problem also (only code p0305/308). That code means "miss-fire" on #2 cylinder. The #2 cylinder is the nearest cylinder on the right (closest to front of car on drivers side) if you are standing in the front of the car.

Jul 12, 2009 | 2000 Jaguar S-Type

Not finding what you are looking for?
1999 Ford Explorer Logo

127 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...