Question about 1989 Geo Tracker

1 Answer

Geo but where is the lever?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 170 Answers

Do you have a user's manual? It may show it in there. It should be in the grill about in the middle of the car or to one side a little. Get a flashlight and look in the grill and you will find it. Where you want someone to push on the hood would be directly in the middle about 4-8" from the front of the hood. If you plan on running this car into the ground, you may want to consider buying a Haynes Repair Manual from Auto Zone. Best $20-25 you can spend. It's a great tool to have. Good Luck!

Posted on Jul 08, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I reconnect the cable on my 1990 geo storm gsi that controls where the air flow is directed. like defrost floor heat vent dash vents. on the dashboard it is the lever above the temp lever. it has...


its just 1 lever , 1 cable and 2 arms (bell cranks)
the lever arm moves the cable, the cable then moves the damper arm. ( cave man simple and super reliable)
if it came loose at the far end, then the clip is missing?
finding GEO parts can be hard, (Geo is dead)
its really a Isuzu Impulse. rebadge job.

here is GM parts list.
note some are not sold now !
and isuzu is defunct here to, so....... USA.

http://www.tonkinonlineparts.com/showAssembly.aspx?ukey_assembly=825350&ukey_make=1087&ukey_model=15866

those levers are bell cranks.
the ends have holes. (for cable)
some cables are dog legged and just fit in , no clips
other cars use clips. if the clip i lost the cable can not be
held to the Cranks (damper levers)
ever been to an auto store,and seen the huge selection
of generic parts, called HELP.? (red blister packs galore)
they have clips.

Feb 20, 2015 | 1990 Geo Storm

1 Answer

I need a diagram for a 1997 GEO METRO 5 SPEED SHIFTER


diagram of what>/
tranny guts
shift cable,
or
shifter lever
a mechanical drawing, of how it works or to show part numbers.
all exist there are many drawing, and a whole service manual on just the Trans.

Jul 07, 2014 | 1997 Geo Metro

2 Answers

What are the fuses on a 1993 Geo metro


click metro here
and read
http://www.fixkick.com/
see those 2 forums.
or here
http://www.teamswift.net/index.php
GEO swift?

if you own any GEO, ANY.
be proactive (its old) and buy the books, then ask questions.
http://www.ebay.com/sch/i.html?_odkw=1993+geo+metro+operators+guide&_osacat=0&_from=R40&_trksid=p2045573.m570.l1313.TR0.TRC0.H0.X1993+geo+metro+operators+manual&_nkw=1993+geo+metro+operators+manual&_sacat=0

or get an account at alldata.com
or join a real forum and ask there.
or google all week.
those are the DIY choices.

or google like this, google really is your friend....

https://www.google.com/search?q=1993+geo+metro+fuse+box&source=lnms&sa=X&ei=cxrNU7DaDMuTyASOrYCwAQ&ved=0CAcQ_AUoAA&biw=1120&bih=516&dpr=1.71



Jun 04, 2014 | 1994 Geo Metro

2 Answers

How to adjust clutch cable 90 geo storm gsi


set it for 1/8 inch free play at the clutch lever, at the BELL.

Sep 15, 2013 | Geo Storm Cars & Trucks

1 Answer

On a 1992 Geo manual transmission, What positions do the two shift actuators need to be in to put the tranny in neutral


this m/t has very complex shift linkage.
you should by a real FSM for the car and see the many long pages on topic there,
the words just for the lever are here
  1. At the console, loosen the gear shift control housing nuts and the guide plate bolts.
  2. Adjust the guide plate by displacing it toward the front and rear so that the gear shift control lever is brought in the middle of the guide plate at the right angle.
  3. Once the guide plate is positioned properly, tighten the guide plate bolts to 7 ft. lbs. (9 Nm) and then the housing nuts to 4 ft. lbs. (5 Nm).
"
try a real fsm. you wont be sorry ! I promise !
http://www.ebay.com/sch/i.html?_trksid=m570.l3201&_nkw=geo+metro+shop+manual+1992&_sacat=0
not haynes, real geo books.

Apr 23, 2013 | 1992 Geo Metro

1 Answer

How do I check the brake fluid on a 95 geo tracker?


there is a clear unit on the master cylinder with a level mark. and also chech the e brake lever in the tracker2_10_2013_6_14_56_pm.jpg2_10_2013_6_15_21_pm.jpg

Feb 10, 2013 | 1995 Geo Tracker

1 Answer

My brake lights won,t go on in my 1993 geo prism


I would check the brake light fuse and the brake light switch under the dash on the brake pedal lever. And, of course, check the bulbs themselves.

Oct 19, 2010 | 1993 Geo Prizm

1 Answer

1992 Geo Metro w/ automatic. In drive, won't


may be low on fluid as that wont shift the pistons in the valve body of the transmission
due to no fluid pressure!

Jul 20, 2009 | 1991 Geo Metro

1 Answer

Fuel Door Release not working


The car was parked in the sun, the release latch apparently thawed out and resumed working.

Jan 08, 2009 | 1996 Geo Prizm

2 Answers

Jammed Hood


I had the same problem with my '93 Geo Metro. I would have to push down on the hood in front where the catch is while someone tried to trip the lever. Good Luck!

Jul 08, 2008 | 1989 Geo Tracker

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

127 people viewed this question

Ask a Question

Usually answered in minutes!

Top Geo Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Geo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...