Question about 1998 Ford Expedition

1 Answer

Running board lights stop working

Factory runnin board lights worked with the courtesy lighting system. They have stopped working. Can not find a fuse that is blown or even listed in the manual. Where are they fused at?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 126 Answers

There is a main wire that runs down the drivers side under truck runns towards runnin board this set of wires one positive and one negetive per light check the wires going to each light take the light apart and also check bulbs.repair any bad connections .

Posted on Jul 12, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have an 06 Buick Lucerne rear courtesy lights do not work front courtesy lights work fine?


The BCM receives battery voltage from the CTSY/RF TRN fuse in order to supply power to the courtesy lamps. The BCM applies this voltage to the courtesy lamps through the courtesy lamp supply voltage circuits. When any door is opened, the door open switch contacts close and the BCM receives a door-open signal. If the BCM receives a door lock or unlock signal, the BCM will activate the courtesy lamp supply voltage circuit, providing battery voltage to the dome lamps and the left and right footwell courtesy lamps. The courtesy lamps can be manually activated by placing the interior lamp switch in the DOME position. For more detailed information concerning courtesy lamp operation refer to Interior Lighting Systems Description and Operation.
The BCM receives battery voltage from the INT LAMPS fuse in order to supply power to the inadvertent courtesy lamps. Inadvertent power courtesy lamp feature provides a similar function for the interior lamps as a retained accessory power feature. The BCM will energize the courtesy lamps supply voltage circuit when the BCM is in the active state (awake). When the inadvertent power courtesy lamps supply voltage circuit is energized, it supplies voltage to all the interior lights listed below. The BCM will continue to supply voltage to the interior lamps after the ignition is turned OFF so that the interior lamps may be operated.

Feb 15, 2018 | Buick Cars & Trucks

1 Answer

Ford Focus Mk1 fuse/fuses for heater fan & interior/courtesy lights


interior fuse box lower dash drivers side , cover/lid will list the locations

Nov 07, 2014 | Ford Focus Cars & Trucks

1 Answer

No power to sterio, over head dome lights, or Dash lights.


I think there should be another fuse for the dash lights and radio and dome (or interior or courtesy it may be designated). Recheck all of those fuses under the dash, I believe one has blown out. This is when a wiring diagram comes in handy-you can see the fuse lay-out, and what circuits each one serves.

Aug 29, 2013 | 1996 Geo Tracker 2 Door

1 Answer

Trunk cargo light not working after LED installed....


The SJB supplies power to the interior lighting system. The SJB will set DTCs if certain circuit failures exist with the interior lighting system.
Visual Inspection Chart Mechanical Electrical
  • Courtesy lamps
  • Map lamps
  • Luggage compartment lamp
  • Vanity lamps
  • Glove compartment lamp
  • Smart junction box (SJB) fuse 3 (15A)
  • Circuitry
  • Courtesy lamps
  • Map lamps
  • Luggage compartment lamp
  • Vanity lamps
  • Glove compartment lamp
  • SJB

Check fuse # 3 SJB

Jul 07, 2017 | 2010 Ford Fusion 2.5

1 Answer

2002 Old Bravada Courtesy light not working


sounds like you may have popped a fuse

check the iod fuses in the fuse compartment driver side of the dash. fuses should be listed on the back of that little plastic cover good luck

Jan 23, 2009 | 1996 Dodge Caravan

1 Answer

Courtesy lights don't work


You will need to test the Body Control Module, it controls the lights.

Jul 03, 2008 | 1996 Dodge Caravan

Not finding what you are looking for?
1998 Ford Expedition Logo

336 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

79865 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

fordexpert

Level 3 Expert

5687 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...