Question about 1999 Honda Accord
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Code P1491 is EGR lift insufficient. It is usually accompanied by P0401. If you have a v6 Accord, there was a recall for the EGR port plugging. Check with your Honda dealer to see if your car is covered under that recall. If you have a 4 cyl, plan on replaceing the EGR. In addition, you need to clean the ports in the engine on the intake and exhaust sides of the EGR ports. To do this, spray some carb/choke//intake cleaner into the ports to saturate the black exhaust build-up. Later, jam a coat hanger or spare dipstick (or some long flexible metal rod) into the parts to break up the black deposits. When your rod passes through easily, spray more cleaner to pass it through. Reassemble and start the engine. It will run rough at first, so you need to give it gas pedal input to burn off the carb cleaner. You should be good to go.
Posted on May 26, 2009
SOURCE: 1999 Honda Accord Coupe
See an example
DISASSEMBLY 1. Remove the suction pipe and the O-ring from the oil pump.
2. Remove the rear cover with the gasket and pins. 3. Remove the cam ring. 4. Remove the rotor and vanes. 5. Remove the front side plate.
6. Remove the inner and outer O-ring. 7. Remove the spring. When assembling, use a new gasket and O-ring.
8. Remove the pulley nut with the spring washer. 9. Pull off the pulley and the woodruff key. 10. Remove the snap ring using snap ring pliers. 11. Drive out the pulley shaft with the bearing. If necessary, use plastic hammer
Posted on May 30, 2008
sorry for bad news, but please rate me fixya!
this is why shops plug in a cigarette lighter plug battery before disconnecting car battery...you can make one yourself...
Posted on Jul 07, 2008
A 41 error is your throttle positioning sensor, its a electrical sensor hooked to your injectors telling them how much gas/air to be releasing as u accelerate/deccelerate. Best and only way to fix it is to buy a new sensor. Then reset the cars computer at a diagnostics shop for little or no cost.
Posted on Mar 22, 2009
need type A T3 8mm base
unless you want stock clear color i think at dealer its under $3
Posted on Dec 19, 2009
Tips for a great answer:
Mar 31, 2015 | 2000 Honda Accord
Nov 14, 2014 | 2007 Honda Accord 2.0
Jun 30, 2014 | 2000 Honda Accord
Dec 28, 2010 | 1998 Honda Accord
Oct 20, 2010 | 1998 Honda Accord
Oct 12, 2010 | 2002 Honda Accord
Sep 27, 2010 | 1998 Honda Accord
Mar 21, 2009 | 1994 Honda Accord
Jan 24, 2017 | 1999 Honda Accord
634 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: