Question about 2003 Dodge Caravan

Open Question

03 caravan intermittently will disingage from 3 or 4th gear on the road. Code PO 884 power up at speed Have gone over ALL connections on trans and module.

Posted by on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 412 Answers

SOURCE: cars

the pinion factor(tire size)must be programmed into trans control module..has to be done with a scan tool

Posted on May 17, 2009

moparhart
  • 245 Answers

SOURCE: trans code po 715 for 1998 dodge grand caravan

Hi
P0715 is for the transmission input speed sensor. This sensor is used for shifting control. It's mounted on the front of the trans, threaded in just under where the cooler lines meet the trans. It has a two wire electrical connector, and a 1" hex for a socket for removal.

This code could be caused by the sensor's wiring, but it's very likely to be the sensor itself and it will need to be replaced. This isn't an uncommon failure.

The input speed sensor runs less than $20 at a parts store and will be in stock at any parts store or dealer. It only takes a few minutes to replace.

Posted on Jul 15, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a code po 700 and code 734 -732 transmission code tell me have I fix it


the codes are trans codes and the trans will have to be inspected and tested to fix. it may be more than you can handle if so take it to a reputable trans shop.

Sep 20, 2014 | 2000 Dodge Caravan

1 Answer

I got a 2000 grandcaravan an it stuck in 2 nd gear codes are 1784 0732 1782 0731 0700 0500 do i need to replace trnny or computer ?


Well code 500 is for the speed sensor which could cause most of the other codes.
I would probably replace the speed sensor in the trans and check the connections, clear the codes then drive it again and see how many codes come back.

Sep 05, 2012 | 2000 Dodge Grand Caravan

2 Answers

My dodge caravan 3.3L shows 5 malfunction codes what do they mean po455 po846 po500 po700 po732


P0455 = Evap leak monitor large leak detected.
This code usually means the gas cap may have been loose or needs the rubber gasket.

P0500 = No vehicle speed sensor signal.
Vehicle speed sensor is located on the transmission near one of the axle shafts (it may need replacing).

P0700 = EATX controller DTC present.
This simply means you have transmission related codes.

P0732 = Gear ratio error in 2nd gear.
This code is of some concern, it means the transmission is slipping in 2nd gear. However the trans may be in limp mode due to the speed sensor code (limp mode means the trans starts out in second gear in order to at least get to a mechanic). The first thing I would do is have these codes cleared as there may be absolutely nothing wrong with the transmission (especially if you pull the trans dip stick and the fluid does not have a burnt smell. The vehicle should drive normally after that. If the check engine light comes back, have the codes scanned ASAP (before any other unrelated code sets). Chances are it may be the output speed sensor if this happens (easy fix). Hope this helps

Regards

Oct 26, 2011 | 2002 Dodge Grand Caravan

1 Answer

99 dodge caravan code po 734 what does it mean


P0734 is a transmission code. The code description is: Additional gear ratio in fourth gear. The most likely cause is the input speed sensor on the transmission, a common problem. The sensor is located on the side of the transmission facing the grill right above the solenoid pack. You need to check the resistance of the sensor. It should be between 500 to 700 ohms. If it tests open, the sensor is bad. If not check the connection and the wiring.

Apr 08, 2011 | 1999 Dodge Caravan

1 Answer

Trans code po 715 for 1998 dodge grand caravan


Hi
P0715 is for the transmission input speed sensor. This sensor is used for shifting control. It's mounted on the front of the trans, threaded in just under where the cooler lines meet the trans. It has a two wire electrical connector, and a 1" hex for a socket for removal.

This code could be caused by the sensor's wiring, but it's very likely to be the sensor itself and it will need to be replaced. This isn't an uncommon failure.

The input speed sensor runs less than $20 at a parts store and will be in stock at any parts store or dealer. It only takes a few minutes to replace.

Jul 15, 2010 | 1998 Dodge Grand Caravan

2 Answers

2002 dodge caravan - transmission slips out of gear, then back in, scan code P0884


trans control module signal intermittent loose connection or frayed wire

Mar 03, 2010 | 2002 Dodge Caravan

1 Answer

2002 caravan trans. no 3 or 4 gear


replace the input and output speed sensors

May 28, 2009 | 2002 Dodge Caravan

3 Answers

Tranmission problem on 1999 Dodge Grand Caravan


When the trans. sticks itself in 2nd gear and stays there is because it's detecting a trans. problem and puts itself in "limp in" mode. When it happens again, to somewhere to have a scan done on the trans. so you can find out which sensor on the trans. is acting up.

Jun 22, 2008 | 1999 Dodge Grand Caravan

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

61 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7688 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...