Question about Dodge Ram 1500

1 Answer

How to change sparkplugs in a 2003 dodgepickup , 4.7 liter motor. need a picture to be sure . where and how

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 1,102 Answers

The spark plugs have their own "coil pack" on them. You have to take the coil pack off and then you can remove the plug. Blow compressed air around the components before you take them off so dirt and debris doesn't get into the engine. Sorry I couldn't find any pictures to post for you.

Posted on Dec 30, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

What is the sparkplug firing order for GMC Sierra pickup truck with a 5.7 liter engine


Driver side cylinders, starting at the front of the engine, are 1,3,5,7

Passenger side, starting at the front, are ,2,4,6,8

Hope this helps.

Feb 24, 2015 | 2003 GMC Sierra 1500

1 Answer

Have a leaking plug by 4th sparkplug on 97' 4.6 triton motor how to repair it?

fix the leak and change the plug but should be changed as a set .so change them all.

Dec 23, 2013 | 1997 Ford F150 Regular Cab

1 Answer

Where are the sparkplugs on a 2004 dodge stratus sxt coupe 2.4 liter dohc 16 valve 4 cylander motor

Where do you guess those are?... On top of the engine head, where else! FOLLOW THE PLUG WIRES... they are plainly visible!

Mar 15, 2013 | 2004 Dodge Stratus

1 Answer

Can someone tell me how can I replace the spark plugs on Dodge Caravan 2005, from above?

Open the hood to access the engine compartment. Locate the sparkplugs sitting to the side of the motor. Six wires run to the motor, three on each side.

Twist the rubber boot and pull away from the sparkplugs. This will expose the sparkplug.

Unbolt the sparkplug with a socket wrench. Use a 5/8-inch deep-well socket attached to the socket wrench.

Pull the sparkplug away from the motor. Discard the sparkplug.

Screw the sparkplug into the motor by hand. Make sure it is hand-tight.

Tighten the sparkplug with the socket wrench, using the deep-well sparkplug socket.

Click the wire to the sparkplug wire to the end of the sparkplug. Gently pull the wire to ensure it clicks into place.

Repeat the procedure for the remaining five sparkplugs. Change each sparkplug one at a time.

Aug 24, 2010 | Dodge Grand Caravan Cars & Trucks

2 Answers

Changing the spark plugs HOW? Where are they at? Can I see a Picture.?

there is a cover over the engine will either say eco tech or 2400 on it unplug connector on driver side uno bolts that hold cover on pull up on cover as cover is coilpack sparkplug boots may stick allittle but will come off then the spark plugs are straight downin the middle very easy to change

May 06, 2010 | 2003 Chevrolet Cavalier

1 Answer

Sounds like the all cylinders are not working. What to do? Sparkplugs? Sparkplug wires?

Could be a cracked or worn distributor cap and rotor. If the plugs haven't been changed in a while, you should change those too. Also, check the ignition timing and adjust to factory specs. I can't tell you what those specs are without knowing if you own a 2.7 liter 4-cylinder model, or a 3.0 liter 6-cylinder model.

Good luck!

Oct 14, 2009 | 1994 Toyota T100

2 Answers

Where to find sparkplugs on engine

trace the plug wires and they should be in the valve covers. just pull out the plug wire and look in the hole of the cover you should see the plug way down there

Apr 13, 2009 | 1997 Oldsmobile Achieva

2 Answers

Crankcase capacity for 2003 ford focus 2.0 liter split port engine


To my knowledge, a 2003 Ford Focus 2.0 SPi engine would need 4 quarts of engine oil (roughly 3.78 liters). Incidentally, the Ford/Cosworth Zeta/Zetec engine would be needing 4.25 quarts (~4 liters).

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa.

Jul 02, 2008 | 2003 Ford Focus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

67 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts


Level 3 Expert

77186 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides