Question about 2002 Chevrolet Monte Carlo

1 Answer

Condave2@aol.com2002 monte carlo driver eindow down ,bad switch? Door panel is apart, switch is out, which wires control the L/window motor

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Chevrolet Master
  • 22,246 Answers

condave2@aol.com2002 monte carlo driver eindow - alicantecoli_10.jpgThink you need a new switch thats the usual fault

Posted on Dec 30, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

1998 chev monte carlo driver window and passenger window

Possible broken wire in harness going from door to body. It is in the rubber boot near the hinges. This is the most common area to cause your problem.

Apr 09, 2013 | 1998 Chevrolet Monte Carlo

1 Answer

Power window 1998 monte carlo

need to check switch for power if power to switch than test and check connector if good than test switch may have gone bad --no power to switch test and check wiring harness and fuses---power good thru switch than need to test motor for wiring problem or motor short

May 14, 2012 | 1998 Chevrolet Monte Carlo

2 Answers

I have a 97 monte carlo w/power windows. Originally the passenger window would go down from drivers side then wouldn't go at all. had the switch replaced and it worked for about a month. now it won't go...

It's probably the window regulator. They can be purchased at the dealership or sometimes you can find them cheaper if you go aftermarket. They can be pretty tricky to replace but most body shops can do it pretty cheap. They can also usually do it while you wait if they aren't that busy you've got 30-45 minutes.

Mar 04, 2011 | 1997 Chevrolet Monte Carlo

1 Answer

I have a 2004 monte carlo and my driver side heat does not work it blows out cold air even when the control switch is on the heat my passenger side works fine

Hello and welcome. this is caused by a bad temp door actuator for the drivers temp door. you will need to replace the drivers temp door actuator. this is a electric motor that moves the temp door from cold to hot and hot to cold

Oct 23, 2010 | 2004 Chevrolet Monte Carlo

1 Answer

1996 monte carlo windows will not go down or up from drivers side master switch and pass side switch will only go down. I know both switches are good, I pulled them and put in 1995 monte and they work fine...

it's in the circuit relay in the drivers master control pannel switch inorder to opperate these windows you actually have to short the power to ground inorder to move the windows up or down you need to repair/ replace the switch,
I had beat myself to death with that problem ,spent all winter taking my door apart to open and repair the door when the window kept coming out of it's tracks,Nice cars but boy never owned a chev that had as many problems as this one everytime you think you have it fixed another problem sneaks up and kicks you in the ***,good luck bud..

Jul 07, 2009 | Chevrolet Monte Carlo Cars & Trucks

1 Answer

Electrical, wiring ?

you better test these two switches to be sure they are bad, as well as the motor. if you have an old battery that is sufficient to operate the motor alone for testing. test each switch with a continuity tester --- if they are both bad you probably have a wiring problem --- make sure there is nothing binding the window mechanism.

Jun 20, 2009 | 2002 Chevrolet Monte Carlo

1 Answer

Electrical problems with window switch,motor and relay replaced. window switch keeps blowing on driver's side.

Usully caused by a wire rubbed through. Common areas are within a few inces of switch, at window channel bracket inside door or where wires pass into car behind kick panel

Jun 20, 2009 | 2002 Chevrolet Monte Carlo

1 Answer

Electric Window on a 1999 monte carlo is in the down position and wedged in the bottom of the door. Window motor drove window down but will not drive upward. Can I drill off the 3 rivets holding the motor...

can you place a thin screwdriver down through the top of door, between the DOOR GLASS and OUTER door panel. If you can, try to raise glss electrically SLOWLY guiding it past the the binding edge. Door glass will need alignment to perrmantly repair

Apr 05, 2009 | 1999 Chevrolet Monte Carlo

1 Answer


Sounds like one of two things. A broken wire in the drivers door or a bad switch in the passenger door

Mar 15, 2009 | 1997 Chevrolet Monte Carlo

Not finding what you are looking for?
2002 Chevrolet Monte Carlo Logo

Related Topics:

75 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides