Question about 1998 Dodge Ram 1500 4WD

1 Answer

I need to know how to unhook the condenser to put another one on

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,403 Answers

You will need to remove the radiator and upper and lower radiator hoses. get it out of the way, then unhook the a/c lines on each side of the condensor, then remove the retaining bolts that hold it to the body. it should come out then.you'll lose the coolant unless you drain the coolant[antifreeze] into a holding fan for reuse. remember if you have pets to store that antifreeze up and away from pets and children. you will also lose you a/c refrigerant. unless you have an a/c vacum pump.you'll lose it when you loosen the condensor lines.but if you're replacing the condensor i suppose you've lost it already. good luck! and thank you for choosing fixya.com

Posted on Dec 30, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Removed door handle and there is a cable that is attached to the handle that is broken (driver's side) and I'd like to know how to remove the cable inside the door to replace it.


to remove the old cable and to install the new one you will need to remove the latch and then unhook cable from the latch. remove the screws on the outside and then you will need to unhook any linkage connected like outside handle rod going to latch, take note of the location of anything removed from the lacth and how it goes on and where, this can get confusing when putting it back together, good day,

Aug 12, 2011 | Toyota Avalon Cars & Trucks

1 Answer

Hi my son has a 1986 corvette and he unhooked the factory alarm system and now the car will not start or even show any signs that it even has power going to the car at all please let me know if you can...


hi unhooked my alarm wouldnt start. just touched a hot wire to I think its the pink wire, its the only wire by itsself on the radio you dont have to leave it on there just put it on there then you can unhook it. my car works fine now

Oct 11, 2010 | 1986 Chevrolet Corvette

1 Answer

Waterpump replacement


Start with unhooking your battery,then start with taking off the fan cover and then the fan,Now its a cluch fan so it turns to the right.Then you will half to unhook the air condenser and move it out of the way. then you should be able to take off two blots on each side and it's off.

Nov 09, 2009 | 2005 GMC Envoy

2 Answers

1998 buick regal - where is the orifice tube located


the a/c orfice tube if thats what you want it will either be in the inlet line going into the condenor or it will be the hose from condenser to accumulator

Jul 22, 2009 | 1997 Pontiac Bonneville

1 Answer

My 2004 chevy aveo has an after market a/c in it. Who ever put it in put the condenser way to close to the radiator and it has been worn down 1/3 of the way. It needs a new condenser and spacers in between...


i dont know anything about the chevy aveo But i purchased a toyota truck years ago without air conditioning and had the dealer install factory a/c and only took 3 hours for the whole thing .

Mar 23, 2009 | 2004 Chevrolet Aveo

1 Answer

Front axle on 94 Chevy 1500 4x4


Well first you need a floor jack to put under bottom a-frame, then unhook shock from bottom a-frame or take off completely its up to you, unhook sway bar from bottom a- frame, and remove caliber off rotor and hang it off to the side, when all thats done you will have to pop the bottom ball joint, then you can put in new axel. Should not take more than 2 hours to do.

Feb 04, 2009 | 1999 Chevrolet Silverado 1500

1 Answer

Need to replace radiator


same is true of wiring to fan switch just be patient it will come

Oct 28, 2008 | 1991 Volkswagen Jetta

1 Answer

Thibohr


it should be just the two straps that are holding it in place you may need to wiggle it a bit and did you take the flller hose lose? you know where you put the gas in there should be a clamp holding it in place.it should drop down with the two straps loosened

Aug 22, 2008 | 1983 Honda Accord

2 Answers

Replacement of fuel pump


There are quite a few steps to this process and I would recommend you get the Haynes manual.

Aug 02, 2008 | 2000 Pontiac Grand Am GT

Not finding what you are looking for?
Cars & Trucks Logo

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...